CLA202 - Receiver Atlas Sound - Free user manual and instructions
Find the device manual for free CLA202 Atlas Sound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Atlas Sound |
| Model | CLA202 |
| Dimensions (W x H x D) | 19 x 3.5 x 12 inches (rack mount, 2U) |
| Weight | 15 lbs (6.8 kg) |
| Power Supply | 120V AC, 60 Hz, 200W max |
| Audio Inputs | 3x RCA, 1x XLR balanced, 1x 1/4" TRS |
| Audio Outputs | 2x RCA line out, 1x XLR balanced, speaker terminals (spring clip) |
| Frequency Response | 20 Hz - 20 kHz ±1 dB |
| Power Output | 2 x 50W RMS into 8 ohms |
| Total Harmonic Distortion | <0.05% at rated power |
| Signal-to-Noise Ratio | >90 dB |
| Input Sensitivity | 1V RMS for rated output |
| Cooling | Internal fan, temperature controlled |
| Front Panel Controls | Volume, input selector, power switch, headphone jack |
| Back Panel Features | Binding post speakers, fuse holder, IEC power connector |
| Maintenance | Clean with dry cloth; avoid liquids; ensure ventilation |
| Safety | Do not expose to rain or moisture; disconnect when not in use |
| Spare Parts | Contact Atlas Sound or authorized dealer for replacement fuses, knobs |
| General Information | Rack-mountable receiver for commercial audio systems |
Frequently Asked Questions - CLA202 Atlas Sound
What is the power output of the Atlas Sound CLA202?
The CLA202 delivers 2 x 50W RMS into 8 ohms, suitable for small to medium commercial installations.
Can I use the CLA202 with passive speakers?
Yes, it has spring clip speaker terminals for passive speakers (8 ohms recommended). Do not use with impedance below 4 ohms.
What input connections are available?
It features 3x RCA, 1x XLR balanced, and 1x 1/4" TRS inputs for line-level sources.
Is the CLA202 rack-mountable?
Yes, it has a standard 19-inch rackmount width and is 2U in height. Rack ears are included.
How do I clean the receiver?
Use a dry, soft cloth to wipe the surface. Do not use any liquids or abrasive cleaners as they may damage the unit.
What should I do if the unit does not power on?
Check the power cord and fuse. The fuse is located on the back panel; replace with same rating (e.g., 2A 250V). Ensure the power switch is pressed.
Can I connect a subwoofer?
Yes, use the RCA line outputs to connect an active subwoofer. The CLA202 does not have a dedicated sub out but the full-range line out works.
What is the protection circuitry in the CLA202?
It includes overload, short-circuit, and thermal protection. If triggered, the unit will mute until the fault is cleared and unit cools.
Does the CLA202 have a headphone output?
Yes, there is a 1/4" TRS headphone jack on the front panel. Using headphones mutes the speaker outputs.
Where can I find replacement parts?
Contact Atlas Sound customer support or an authorized dealer for genuine parts like fuses, knobs, and power cords.
User questions about CLA202 Atlas Sound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CLA202 - Atlas Sound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLA202 by Atlas Sound.