MSC-FS44BFL - Router Matrix Switch - Free user manual and instructions
Find the device manual for free MSC-FS44BFL Matrix Switch in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Matrix Switch |
| Model | MSC-FS44BFL |
| Ports | 4 x 10/100 Mbps Fast Ethernet (RJ45) |
| Switching Capacity | 1.6 Gbps |
| MAC Address Table | 1K entries |
| Power Supply | 5V DC, 0.6A (external adapter) |
| Dimensions (L x W x H) | 120 x 75 x 25 mm |
| Weight | 150 g |
| Housing Material | Plastic |
| Operating Temperature | 0°C to 40°C |
| Standards Compliance | IEEE 802.3, 802.3u |
| LED Indicators | Power, Link/Act (per port) |
| Installation | Desktop or wall-mountable (screws not included) |
| Configuration | Plug and play, no software required |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Keep away from water, do not disassemble, use only supplied adapter. |
| Spare Parts | Power adapter available from manufacturer. |
| Repairability | No user-serviceable parts. Contact support for issues. |
Frequently Asked Questions - MSC-FS44BFL Matrix Switch
How do I connect the MSC-FS44BFL router?
Connect one end of an Ethernet cable from your modem or network to any LAN port. Then connect your devices (computers, printers) to the remaining ports using additional Ethernet cables. Plug in the power adapter and turn on the device.
Do I need to configure the router?
No, the MSC-FS44BFL is a plug-and-play device. It works out of the box without any configuration. Simply connect and power on.
What is the default IP address of the router?
This device is an unmanaged switch/router and does not have a configurable IP address. It operates at Layer 2 and does not assign IPs.
How can I reset the MSC-FS44BFL to factory settings?
There is no reset button on this model. It is a non-configurable device; if you encounter issues, try power cycling by unplugging it for 10 seconds.
What is the maximum cable length supported?
The MSC-FS44BFL supports standard Ethernet cable lengths up to 100 meters (328 feet) for each port.
Can I mount the router on a wall?
Yes, the device has mounting holes on the bottom. Use screws (not included) to attach it securely to a wall or desktop.
The LEDs on my MSC-FS44BFL are not lighting up. What should I do?
First, verify the power adapter is securely connected and the outlet is working. If using a power strip, check it is on. If the LED still doesn't light, the device may be faulty. Contact support.
Does the MSC-FS44BFL support Gigabit speeds?
No, it supports Fast Ethernet speeds up to 100 Mbps on each port. For Gigabit (1000 Mbps) connections, consider a different model.
Is the MSC-FS44BFL compatible with all Ethernet devices?
Yes, it is designed to work with any device that supports standard Ethernet protocols (IEEE 802.3/802.3u), including computers, consoles, printers, and smart TVs.
How do I clean the MSC-FS44BFL?
Use a soft, dry cloth to gently wipe the exterior. Do not use water, solvents, or abrasive cleaners. Ensure the device is unplugged before cleaning.
User questions about MSC-FS44BFL Matrix Switch
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual MSC-FS44BFL - Matrix Switch and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MSC-FS44BFL by Matrix Switch.