HTi70TM - Surveillance Camera Speco Technologies - Free user manual and instructions

Product Type	HD-TVI Security Camera
Model	HTi70TM
Image Sensor	1/2.8" Progressive Scan CMOS
Resolution	7 Megapixels (3072x2304)
Lens	2.8mm fixed lens
Minimum Illumination	0.01 Lux
Day/Night Mode	Mechanical IR cut filter
IR Distance	30m (98ft)
Video Output	HD-TVI, CVBS
Power Supply	12V DC / 24V AC
Power Consumption	Max 6W
Dimensions (WxHxD)	70mm x 58mm x 140mm
Weight	0.4 kg (0.88 lbs)
Housing Material	Aluminum alloy
Ingress Protection	IP67
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Main Functions	Motion detection, privacy mask, mirror, flip
Maintenance & Cleaning	Clean lens with soft dry cloth; avoid water contact
Safety Precautions	Install on stable surface; disconnect power before cleaning
Spare Parts & Repairability	Contact authorized service center for repairs

Frequently Asked Questions - HTi70TM Speco Technologies

How do I connect the HTi70TM camera to my DVR?

Use a BNC cable for HD-TVI connection. Connect the camera's video output to the DVR's video input, and provide power via 12V DC or 24V AC adapter. Ensure the DVR supports HD-TVI.

What is the maximum resolution supported?

The HTi70TM supports up to 7 megapixels (3072x2304) resolution over HD-TVI.

Can I use this camera outdoors?

Yes, the camera has an IP67 rating, meaning it is dust-tight and protected against temporary immersion in water. It can be used outdoors in harsh weather.

How do I access the camera settings?

Camera settings can be accessed via the DVR's menu or through a compatible OSD (on-screen display) using a dedicated controller. Refer to your DVR manual for details.

What type of power supply is needed?

The camera accepts both 12V DC and 24V AC power. Use a suitable power adapter (not included) with a voltage rating of 12V DC or 24V AC and at least 500mA.

How do I clean the camera lens?

Use a soft, lint-free cloth to gently wipe the lens. If necessary, slightly dampen the cloth with water or a lens cleaner. Avoid using abrasive materials that may scratch the lens.

Why is the image blurry?

Check if the lens is dirty or fogged. Also, adjust the focus ring (if applicable) or ensure the camera is positioned at the correct distance. If using at night, ensure IR is enabled.

What is the IR range of this camera?

The built-in infrared LEDs provide illumination up to 30 meters (98 feet) in complete darkness.

Can I mount the camera on the ceiling?

Yes, the camera comes with a mounting bracket that allows ceiling or wall installation. Ensure the mounting surface is sturdy enough to hold the camera's weight.

How do I troubleshoot no video signal?

First, check all cable connections. Ensure the power supply is working and the camera is receiving power. Verify that the DVR input channel is configured for HD-TVI and the correct video format is selected.

USER MANUAL HTi70TM Speco Technologies

HTi70TM - 2.8\~12mm motorized zoom focus lens, dark gray housing

HTi702TM - 5\~50mm motorized zoom focus lens, dark gray housing

DIMENSIONS

FEATURES

• Full HD resolution over coax (HD-TVI)
• Supports up to Full HD 1080p @ 30fps
- True WDR operation
• Superior low-light performance
- Amplify existing light with no distance limitation
- Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor
• Built-in heater and anti-fog glass reduces condensation
• 3-axis for wall and ceiling mounting
• Full OSD operation through on-board control and UTC (up the coax)
• Additional 960H analog output
• Signal distance up to 1600 feet*
• IP67 compliant, weather resistant
• 12VDC & 24VAC dual voltage operation
- 5 year warranty

SPECIFICATIONS

Image Sensor.... 1/2.9" Progressive Scan CMOS, 2MP

Minimum Illumination..... 0.001 lux (Sens-up X32)

Effective Pixels.... 1984 (H) x 1105 (V)

Total Pixels.... 2000 (H) x 1121 (V)

Scanning System...... Progressive

S/N Ratio...... More than 50dB

Output Resolution...... 1920x1080 @ 30fps

Video Output.... 1.0Vp-p / 75 Ohms

Electronic Shutter..... Auto / Manual (1/30 – 1/30,000 sec.)

Day / Night...... Color (default) / BW / Ext / Auto

Test Monitor Output...... CVBS (BNC out in Yellow)

Communication...... UTC (up the coax)

Power.... 12VDC / 24VAC

Power Consumption..... 600mA max. (DC), 450mA max. (AC)

Operating Temperature.... -40° F – 140° F

Unit Dimensions.... 9.64" (L) x 3.72" (Dia.)

Unit Weight.... 2 lbs (camera), 0.9lbs (junction box)

Certifications...... FCC, RoHS

Signal Distance..... Up to 1600 feet

(depending on coax quality)*

OSD MENU TREE

PRESET MODE

- OUTDOOR - HALLWAY • LOBBY • ELEVATOR • INDOOR• LO

MAIN SETUP

OSD CONTROL

graph LR
    A["Video Test (CVBS)"] --> B["OSD Joystick"]
    B --> C["Up (Zoom-In)"]
    B --> D["Left (Far)"]
    B --> E["Right (Near)"]
    B --> F["Down (Zoom-Out)"]

Intensifier T® Series HD-TVI 1080p 2MP Bullet Camera Wall/Ceiling Mount, UTC, 2BNC out for TVI & CVBS, Dual voltage

HTi70TM - 2.8\~12mm motorized zoom focus lens, dark gray housing

HTi702TM - 5\~50mm motorized zoom focus lens, dark gray housing

OSD MENU Details

IRIS : 'ALC' as a default value

2-MOTOR : AF Mode, Scanning, OnepushAF, Sync TDN, Initial

EXPOSURE : adjusts exposure settings.

BRIGHTNESS : Adjusts image brightness. (0\~20)

SHUTTER : Outdoor / Indoor / Deblur

INTENSIFY : Sets the desired multiple of the digital exposure length.

AGC(Auto Gain Control): Adjusts the AGC level. (0\~10)

BACKLIGHT : Adjusts backlight options.

WDR : WDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark area

- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)

* CVBS out cannot adjust this function.

BLC : Produces a clearer image of an object darkened by strong backlighting.

- H-POS : Adjusts the horizontal position(0\~20)

- V-POS : Adjusts the Vertical position(0\~20)

- H-SIZE : Adjusts the horizontal block size (0\~20)

- V-SIZE : Adjusts the vertical block size (0\~20)

HLC : Uses to contain extremely bright areas such as from car headlight,

the light can be masked out much of the on-screen details.

DAY / NIGHT : Adjust Day / Night options.

COLOR : Always Color mode, Default value for these cameras

B/W : Always B/W mode.

- ANTI-SAT.: Adjusts the Anti Saturation level (0\~20)

EXT : please do not use this mode for these cameras

AUTO : Day / Night is switching automatically by AGC level.

ANTI-SAT.: Adjusts the Anti Saturation level (0\~20)

- AGC THRES : Adjusts AGC THRES (0\~20)

- AGC MARGIN : Adjusts AGC margin (0\~20)

- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)

COLOR : Adjusts white balancing options.

AWB : it goes to optimized color level automatically.

COLOR GAIN : Sets the desired Color Gain value (0\~20)

SPECO DNR : Uses to reduce the background noise in a low luminance environment with 2D + 3D filtering system.

IMAGE : Adjusts various image options.

SHARPNESS: Adjusts sharpness level. Increasing this value, the picture outline becomes stronger and clear. (0\~10)

GAMMA : Sets the desired Gamma value. (0.45 \~ 0.75)

MIRROR : Change the video direction horizontally.

FLIP: Change the video direction perpendicularly.

ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over saturated areas within the image.

DEFOG : Activated this mode when the video or the weather is foggy.

PRIVACY : Used to hide regions of the image.

MOTION : Adjust motion detection settings.

DET WINDOW

DET TONE

MDRECT FILL

SENSITIVITY : Sets the desired of "Motion" (0\~20)

MOTION OSD

TEXT ALARM

SIGNAL OUT

SYSTEM : Adjusts various camera system options.

OUTPUT

MAIN OUTPUT ANALOG OUT0

ANALOG OUT0 TVI

Y GAIN

CB GAIN

CR GAIN

FRAME RATE: 1080P 30 / 720P 60

FREQ 60Hz

COM.

IMAGE RANGE

COLOR SPACE

COLOR BAR : Manufacturer's option

LANGUAGE : Sets the desired OSD language

CAM TITLE

RESET: Press with long to reset all settings to factory defaults.

LIMITED WARRANTY - VIDEO PRODUCTS

THIS WARRANTY IS VALID ONLY ON PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA AND CANADA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL USER.

SUBJECT TO CONDITIONS AND EXCLUSIONS FOUND BELOW. THIS PRODUCT IS WARRANTED AGAINST MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE FOLLOWING PERIOD FOR PARTS AND LABOR:

SPECO TECHNOLOGIES CAMERAS......5 YEARS

SPECO TECHNOLOGIES IP CAMERAS......5 YEARS

SPECO PTZ......1 YEAR

SPECO TECHNOLOGIES MONITORS......1 YEAR

IR LEDS......90 DAYS

DVRs	5 YEARS
NVRs	5 YEARS
BALANCE OF
SPECO TECHNOLOGIES LINE	1 YEAR

SPECO TECHNOLOGIES WILL REPAIR OR REPLACE (AT OUR DISCRETION) ANY PARTS FOUND TO BE DEFECTIVE FOR THE WARRANTY PERIOD SPECIFIED. WE WILL PROVIDE A REPLACEMENT FOR ANY DEFECTIVE PART.

CONDITIONS

1. YOU MUST OBTAIN A RETURN AUTHORIZATION (RA) NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES, WHETHER FOR RETURN/EXCHANGE OR REPAIR, WHETHER IN OR OUT OF WARRANTY.
2. THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP.
3. TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER, REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD.
4. SPECO TECHNOLOGIES DOES NOT AUTHORIZE ANY INTERNET OR MAIL ORDER PRODUCT SALES. IF A SPECO TECHNOLOGIES PRODUCT IS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR OR OTHER SOURCE, INCLUDING RETAILERS, MAIL ORDER SELLERS AND ONLINE SELLERS. IT WILL NOT BE HONORED OR SERVICED UNDER THE EXISTING SPECO TECHNOLOGIES WARRANTY POLICY: ANY SPECO TECHNOLOGIES PRODUCT PURCHASED FROM THESE ONLINE MERCHANTS WILL VOID THE APPLICABLE WARRANTY AND IS INELIGIBLE FOR TECHNICAL SUPPORT. IF YOU HAVE QUESTIONS ABOUT A RESELLER, PLEASE CONTACT SPECO TECHNOLOGIES AT 1-800-645-5516 FOR A LIST OF UNAUTHORIZED DEALERS. VISIT: www.specotech.com/unauthorized.

EXCLUSIONS

1. THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF CUSTOMER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE MODEL'S INSTRUCTION MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED, ABUSED, OR HAVE MISSING OR ALTERED SERIAL NUMBERS.

2. THIS WARRANTY SHALL NOT APPLY TO UNCRATING, SETUP, INSTALLATION, OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR.

3. THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING, BUT NOT LIMITED TO, ANY MALFUNCTION, DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARTS, IMPROPER MAINTENANCE, MODIFICATION OR REPAIR BY THE USER, ABUSE, MISUSE, NEGLECT, ACCIDENT, FIRE, FLOOD, OR OTHER ACTS OF NATURE, INCORRECT LINE VOLTAGE, DAMAGE OR IMAGE BURNS TO TELEVISION PICTURE TUBES CAUSED BY OR ATTRIBUTABLE TO THE USE OF ANY ACCESSORY, ELECTRONICS GAME OR DEVICE, OR DAMAGE CAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT.

THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOT AUTHORIZE ANY PARTY TO ASSUME FOR US ANY OTHER OBLIGATION OR LIABILITY. IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL, SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES. THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. NOTE: FOR YOUR PROTECTION IN THE EVENT OF THEFT OR LOSS OF THIS PRODUCT, PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT.

MODEL NO.:

(LOCATED ON BACK OR BOTTOM OF UNIT)

DATE OF PURCHASE:

WHERE PURCHASED:

SERIAL NO.:

-

PURCHASE PRICE:

Speco Technologies200 New HighwayAmityville, NY 11701www.specotech.com

FOR MORE INFORMATION REGARDING SERVICE OR RETURN,CALL US TOLL FREE: 1-800-645-5516 IN METRO NY: 631-957-8700

ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND/OR AUDIO SURVEILLANCE EQUIPMENT ESPECIALLY WHEN THERE IS AN EXPECTATION OF PRIVACY. INQUIRE REGARDING FEDERAL, STATE AND/OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND/OR AUDIO RECORDING OR SURVEILLANCE EQUIPMENT. PARTY CONSENT MAY BE REQUIRED.

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 231127