Orima

ORBC-100 - Heat pump Orima - Free user manual and instructions

Find the device manual for free ORBC-100 Orima in PDF.

📄 108 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Orima ORBC-100 - page 41
View the manual : English EN Español ES Português PT
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeAir-to-Water Heat Pump
BrandOrima
ModelORBC-100
CategoryHeat Pump
Dimensions (W x D x H)800 x 600 x 800 mm
Net Weight75 kg
Gross Weight85 kg
Power Supply230 V / 50 Hz / 1-phase
Heating Capacity9.5 kW
Cooling Capacity8.0 kW
COP (Coefficient of Performance)3.5
RefrigerantR32
Sound Level55 dB(A)
Operating Temperature Range-15°C to 35°C
FunctionsHeating, Cooling, Hot Water
ControlWired Thermostat / Remote Control
Defrost ModeAutomatic
Compressor TypeInverter
Energy ClassA++
InstallationOutdoor Unit
Warranty2 Years
MaintenanceClean filters every 3 months, annual professional check
Safety FeaturesOverheat protection, freeze protection, high pressure switch
Spare Parts & ReparabilityModular design, easy access to components; parts available from Orima service centers

Frequently Asked Questions - ORBC-100 Orima

How to reset the Orima ORBC-100 heat pump?
To reset the Orima ORBC-100, locate the reset button on the control board or use the remote control: press and hold the 'Reset' button for 5 seconds until the unit restarts. If the issue persists, turn off the power for 10 minutes and then turn it back on.
What maintenance is required for the heat pump?
Regular maintenance includes cleaning the air filters every 3 months, checking the refrigerant pressure annually, and scheduling a professional inspection once a year. Keep the outdoor unit free from debris and snow.
Can the heat pump operate in very cold weather?
Yes, the Orima ORBC-100 is designed to operate down to -15°C ambient temperature. It features an automatic defrost cycle to prevent ice buildup on the outdoor coil.
What type of refrigerant does the ORBC-100 use?
The heat pump uses R32 refrigerant, which is environmentally friendly with low global warming potential (GWP) and high energy efficiency.
How to clean the filters on the Orima ORBC-100?
Turn off the unit and remove the front panel. Take out the air filters and rinse them with warm water (< 40°C). Allow them to dry completely before reinstalling. Do not operate the unit without filters.
Why is the heat pump not heating properly?
Possible causes include dirty filters, low refrigerant charge, blocked outdoor unit, or incorrect thermostat settings. Check filters first, then ensure the outdoor unit has clearance. If the problem persists, contact a qualified technician.
How to adjust the temperature on the ORBC-100?
Use the remote control or wired controller to set the desired room temperature. Press the 'Mode' button to select heating or cooling, then use the 'Temp +' or 'Temp -' buttons to adjust. The display shows the set temperature.
What does error code E1 mean on the display?
Error code E1 indicates a high pressure switch trip. This can be caused by a blocked outdoor coil, dirty filters, or overcharge of refrigerant. Turn off the unit, clean filters and outdoor unit, then restart. If the error recurs, call a service technician.
How to switch between heating and cooling mode?
Press the 'Mode' button on the remote control or wired controller until the display shows the desired mode: a sun icon for heating, a snowflake for cooling. The unit will switch accordingly after a short delay.
Is the Orima ORBC-100 compatible with solar panels?
Yes, the heat pump can be integrated with a solar photovoltaic system using a hybrid inverter. It operates on standard 230V AC, so a solar system with grid-tie capability can offset the electricity consumption. Consult a solar installer for proper setup.

User questions about ORBC-100 Orima

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heat pump in PDF format for free! Find your manual ORBC-100 - Orima and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ORBC-100 by Orima.

USER MANUAL ORBC-100 Orima

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Orima

Model : ORBC-100

Category : Heat pump