ZPX84 - Loudspeaker PHOENIX GOLD - Free user manual and instructions

Product Type	Passive Speaker
Model	ZPX84
Brand	Phoenix Gold
Power Handling (RMS)	100 W
Peak Power	200 W
Impedance	8 Ω
Frequency Response	45 Hz – 20 kHz
Sensitivity	88 dB @ 1W/1m
Driver Configuration	2-way: 1x 8" woofer, 1x 1" tweeter
Dimensions (W x H x D)	230 x 300 x 265 mm
Weight	5.2 kg
Enclosure Type	Bass Reflex (ported)
Material	MDF with vinyl finish
Grille	Removable magnetic grille
Connection Type	Binding posts
Recommended Amplifier Power	20 – 150 W RMS per channel
Placement	Bookshelf or stand-mount
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use solvents.
Safety Precautions	Do not expose to water or high humidity. Keep away from heat sources.
Spare Parts & Repairability	No user-serviceable parts. Contact authorized service center for repairs.

Frequently Asked Questions - ZPX84 PHOENIX GOLD

What is the recommended amplifier power for the Phoenix Gold ZPX84?

The ZPX84 speaker is rated for 100W RMS and 200W peak. It is recommended to pair it with an amplifier delivering between 20 and 150W RMS per channel to avoid distortion or damage.

Can I use the ZPX84 as a center channel speaker?

Yes, the ZPX84 can be used as a center channel speaker in a home theater setup. Its shielded design ensures no interference with nearby screens.

What type of speaker cable should I use?

Use high-quality speaker wire with a gauge of 14-16 AWG for runs up to 15 meters. Ensure proper polarity (red to positive, black to negative).

How do I clean the Phoenix Gold ZPX84?

Clean the cabinet with a soft, dry microfiber cloth. For the grille, gently vacuum with a brush attachment. Avoid using any liquid cleaners or abrasive materials.

What is the warranty period for the ZPX84?

Phoenix Gold typically offers a 2-year warranty from the date of purchase against manufacturing defects. Check with your dealer for specific terms.

Can I mount the ZPX84 on a wall?

The ZPX84 is designed for bookshelf or stand placement. For wall mounting, use a compatible speaker wall mount bracket that can support its weight (5.2 kg).

What is the impedance of the ZPX84?

The nominal impedance is 8 ohms, making it compatible with most home audio amplifiers. Ensure your amplifier can drive 8 ohm loads.

How do I connect the ZPX84 to my amplifier?

Connect the positive terminal of the speaker to the positive output of your amplifier, and the negative to negative. Use banana plugs, spade connectors, or bare wire.

Does the ZPX84 come with a grille?

Yes, it includes a removable magnetic grille for protection of the drivers. It can be taken off for a more modern look.

What should I do if the speaker produces no sound?

First, check the speaker wire connections at both ends. Verify that the amplifier is powered on and not muted. Test with another audio source. If the issue persists, the speaker may need service.

USER MANUAL ZPX84 PHOENIX GOLD

Close-up of a black speaker cone with 'PHOENIXGOLD' branding and 'ZIPX' logo, no additional text or symbols visible.

ZPX84 - 8" / 200MM PERFORMANCE SPL PRO AUDIO MIDRANGE

Close-up of a black speaker cone with 'PHOENIXGOLD' branding and a logo on the front face (no other text or symbols visible)

ZPX654 - 6.5" / 165MM PERFORMANCE SPL PRO AUDIO MIDRANGE

ZPX Series

FEATURES

• 1.5" OFC High temp voice coil
• 20Oz Ferrite magnet
• Lightweight paper cone
- Triple roll cloth surround
- Woven tinsel leads
- Spade terminals

Installation

To ensure proper installation, check that the speakers fit into your desired location - this could require removal of existing vehicle speakers. Check the surrounding area before drilling or cutting holes. DO NOT work near fuel tanks, fuel lines hydraulic lines or electrical wiring. Once installed make sure the speaker is firmly fixed in your vehicle.

Always ensure that the speaker and cables are securely attached and installed in such a way that no cables can be pinched or damaged. Phoenix Gold accepts no responsibility for damage or injury in relation to inappropriate installation of this product.

4 OHM SPEAKERS = 1 OHM LOAD

4 OHM SPEAKERS = 4 OHM LOAD

SPECIFICATION ZPX654 ZPX84
Speaker Type: PRO Audio Midrange Speaker PRO Audio Midrange Speaker
Speaker Size: 6.5" (165mm) 8" (200mm)
Impedance: 4 Ω 4 Ω
Frequency Response: 100Hz - 10kHz 80Hz - 9000Hz
Power Handling (RMS): 200W 225W
Power Handling (MAX): 400W 450W
Sensitivity: 91.4dB (1W/1m) 92.5dB (1W/1m)
Re:	3.2 Ohm	3.2 Ohm
Fs:	117.8 Hz	98 Hz
Qms:	5.71	5.51
Qes:	0.86	0.96
Qts:	0.75	0.82
Cms:	0.18 mm/N	0.19 mm/N
Vas: 4.8 L	12 L
BL:	5.3 N/A	5.4 N/A
Sd:	136.8 cm2	213.8 cm2
Mms:	10 gr	14.1 gr
Voice Coil Diameter:	1.5" (38mm) 1.5" (38mm)
Outer Diameter:	165mm	211mm
Mounting Diameter:	141mm	183mm
Mounting Depth:	75mm	83mm
Speaker Grills	No	No

Disclaimer

Ensure your safety and the well-being of those around you by following these essential guidelines:

• Keep all product materials and packaging away from children, pets, or anyone at risk of suffocation.
• Exposure to noise levels above 85 dB can cause permanent hearing damage.
• Extreme sound frequencies reduce perception abilities that are essential in road traffic conditions; do not let loud volumes distract from being mindful behind the wheel.
  • Phoenix Gold takes no responsibility for any physical harm or damage caused by improper use of their products.
• Ensure that all metals and raw materials are disposed of in accordance with local regulations and environmental standards to minimise any negative impact on the environment.

Warranty

Phoenix Gold products come with a limited warranty and are covered by our regional distribution partners and their terms and conditions.

You can find out more information by contacting your local retailer or distributor.