BH 6032 B - Range hood LERAN - Free user manual and instructions

Product Type	Range Hood
Brand	LERAN
Model	BH 6032 B
Width	60 cm
Depth	50 cm
Height	Adjustable, approximately 60-110 cm
Weight	Approximately 12 kg
Power Supply	220-240 V ~ 50 Hz
Rated Power	200 W
Motor Type	Single motor, 2 speeds
Max Airflow	Approximately 600 m³/h
Noise Level	≤ 65 dB(A)
Lighting	2 x 40 W halogen bulbs
Filter Type	Aluminum grease filter, washable
Control Type	Mechanical push buttons
Installation	Wall-mounted, ducted or recirculating
Duct Outlet Diameter	150 mm
Energy Class	B
Annual Energy Consumption	Approximately 40 kWh/year
Safety Features	Auto-off timer, safety switch
Maintenance	Clean grease filter monthly; replace carbon filter every 6 months
Spare Parts Availability	Filters, bulbs, and buttons available via service
Warranty	2 years

Frequently Asked Questions - BH 6032 B LERAN

How do I install the BH 6032 B range hood?

Installation should be done by a qualified professional. Ensure the hood is mounted securely on a wall at the recommended height (65-75 cm above gas hob, 50-65 cm above electric). Connect the ductwork for extraction or use the recirculation mode with a carbon filter.

How do I clean the grease filter?

Remove the aluminum grease filter and wash it with warm soapy water or in the dishwasher at low temperature. Let it dry completely before reinstalling. Clean it every month for optimal performance.

How often should I replace the carbon filter?

If using recirculation mode, replace the activated carbon filter every 3-6 months, depending on usage. A saturated filter will reduce efficiency and increase noise.

What light bulbs does the BH 6032 B use?

The hood uses two 40W halogen bulbs with a G9 base. Always replace with the same type and wattage to avoid damage.

Why is my range hood noisy?

Noise can increase due to blocked filters, loose parts, or incorrect duct installation. Clean the filters, tighten screws, and ensure the duct is smooth and not too narrow.

Can I use the hood without ducting?

Yes, the BH 6032 B can be used in recirculation mode. You must install a carbon filter (sold separately) to absorb odors. The filtered air is then released back into the kitchen.

What are the dimensions of this hood?

The hood is 60 cm wide, 50 cm deep, and the height is adjustable between 60 and 110 cm. Always measure your space before installation.

How do I reset the filter alarm?

After cleaning or replacing filters, press and hold the speed button for 3 seconds until the indicator light turns off. Refer to the manual for exact steps.

Can I use the hood over a gas stove?

Yes, the hood is suitable for gas hobs. Maintain a minimum height of 65 cm between the hob and the hood to ensure safety and efficiency.

Where can I purchase spare parts?

Spare parts such as filters, bulbs, and control buttons can be ordered from LERAN authorized service centers or online retailers. Use the model number BH 6032 B.

USER MANUAL BH 6032 B LERAN

Technical line drawing of a mechanical assembly with two rectangular components and mounting brackets (no text or symbols)

Technical line drawing of a mechanical housing or enclosure with mounting base and cylindrical top (no text or symbols)

Technical line drawing of a mechanical fan assembly with visible blades and mounting brackets (no text or symbols)

Two identical rectangular icons with a light bulb symbol inside, each containing a circular and double-out button (no text or labels)

Pure technical line drawing of a rectangular frame with a small inset showing a component (no text or symbols)