ISW-808PT-M12A - Network switch Planet - Free user manual and instructions
Find the device manual for free ISW-808PT-M12A Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed PoE+ Switch |
| Model | ISW-808PT-M12A |
| Brand | Planet |
| Ports | 8 x 10/100/1000T M12 (D-coded) PoE+ |
| SFP Slots | 2 x 100/1000X SFP |
| PoE Standard | IEEE 802.3af/at, PoE+ up to 30W per port |
| Total PoE Budget | 240W |
| Switching Capacity | 20 Gbps |
| MAC Address Table | 8K entries |
| Management | Web, SNMP v1/v2c/v3, CLI, RMON |
| Layer 2 Features | VLAN, QoS, STP, IGMP Snooping, Link Aggregation |
| Security | 802.1X, ACL, Port Security, SSH/SSL |
| Power Input | Dual 48V DC (terminal block and M12 A-coded) |
| Power Consumption | Max 250W (with PoE load) |
| Dimensions (W x D x H) | 165 x 150 x 70 mm |
| Weight | 1.5 kg |
| Protection Rating | IP30 |
| Operating Temperature | -40°C to 75°C |
| Mounting | DIN-rail and wall mount |
| Certifications | CE, FCC, UL |
| Warranty | 5 years |
Frequently Asked Questions - ISW-808PT-M12A Planet
What is the PoE budget of the ISW-808PT-M12A?
The total PoE budget is 240W, supporting up to 30W per port.
How to reset the switch to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on.
Can this switch be used outdoors?
It has an IP30 rating and an operating temperature range of -40°C to 75°C, making it suitable for harsh industrial environments but not direct outdoor exposure without additional enclosure.
What type of M12 connectors are used?
The copper ports use M12 D-coded connectors for Ethernet, and the power input uses an M12 A-coded connector.
Does it support VLAN?
Yes, it supports 802.1Q VLAN with up to 256 VLAN groups.
How to configure the switch?
You can configure it via web interface, CLI (through console or SSH), or SNMP.
What is the maximum cable length for PoE?
The maximum cable length for PoE on Cat5e or better cable is 100 meters.
Is the device fanless?
Yes, it is fanless for silent operation and increased reliability.
Can I mount it on a DIN rail?
Yes, it comes with a DIN-rail kit included. Wall mounting is also supported.
What is the power input voltage?
It requires 48V DC (46-57V) and has dual power inputs for redundancy.
User questions about ISW-808PT-M12A Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual ISW-808PT-M12A - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISW-808PT-M12A by Planet.