5M68 - Conditionneur de tension Daytronic - Free user manual and instructions
Find the device manual for free 5M68 Daytronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Voltage Conditioner |
| Brand | Daytronic |
| Model | 5M68 |
| Dimensions (H x W x D) | 3.5 x 19 x 12 inches (rackmount) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | 115/230 VAC, 50-60 Hz, 10 VA |
| Input Voltage Range | ±10 VDC or ±100 mV, selectable |
| Output Voltage | ±10 VDC, 0-10 VDC, or 4-20 mA (jumper selectable) |
| Bandwidth | DC to 10 kHz |
| Accuracy | ±0.1% of full scale |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity | 10% to 90% non-condensing |
| Isolation | 1500 VAC input-to-output, 500 VAC power-to-ground |
| Connectors | Removable screw terminals for input and output |
| Mounting | 19-inch rack mount (1U) |
| Front Panel | Aluminum, anodized, with LED power indicator |
| Compliance | CE, RoHS |
| Warranty | 1 year limited |
Frequently Asked Questions - 5M68 Daytronic
What is the input voltage range of the Daytronic 5M68 voltage conditioner?
The input voltage range is selectable: ±10 VDC or ±100 mV. Use the internal jumpers to configure for your sensor.
How do I select the output signal type?
The output can be configured internally for ±10 VDC, 0-10 VDC, or 4-20 mA. Refer to the manual for jumper positions.
Can the 5M68 be powered from 230 VAC?
Yes, the power supply accepts 115/230 VAC, 50-60 Hz. A switch or jumper selection on the internal power module may be required.
What is the accuracy of the 5M68?
The accuracy is ±0.1% of full scale, typical for industrial signal conditioners.
How do I zero and span calibrate the conditioner?
Use the front panel or internal trimpots for zero and span adjustment. Apply a known input and adjust for correct output. A precision multimeter is recommended.
Does the 5M68 provide isolation?
Yes, it offers 1500 VAC isolation between input and output, and 500 VAC between power and ground, protecting sensitive equipment from ground loops.
What is the bandwidth of the 5M68?
The bandwidth is DC to 10 kHz, suitable for dynamic voltage measurements.
Can I mount the 5M68 in a standard 19-inch rack?
Yes, it occupies 1U height and comes with rack ears for mounting. Dimensions are 3.5 x 19 x 12 inches.
How do I clean the 5M68?
Disconnect power. Wipe the exterior with a dry soft cloth. Do not use solvents or abrasive cleaners. Keep ventilation slots free of dust.
Where can I find spare parts or service for the 5M68?
Contact Daytronic or an authorized distributor. Common spare parts include screw terminal connectors, fuses, and internal jumpers. For repairs, return the unit to the factory.
User questions about 5M68 Daytronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Conditionneur de tension in PDF format for free! Find your manual 5M68 - Daytronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5M68 by Daytronic.