WS-3000-X3 - Weather Station Ambient Weather - Free user manual and instructions
Find the device manual for free WS-3000-X3 Ambient Weather in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Weather Station |
| Brand | Ambient Weather |
| Model | WS-3000-X3 |
| Display Type | LCD Color Display |
| Main Unit Dimensions | 6.5 x 4.5 x 1.2 inches |
| Main Unit Weight | 12 oz (0.75 lbs) |
| Power Supply (Console) | 5V DC Adapter (included) or 2 x AAA batteries (backup) |
| Power Supply (Outdoor Sensor) | 2 x AA batteries (not included) |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Indoor Humidity Range | 1% to 99% RH |
| Outdoor Humidity Range | 1% to 99% RH |
| Barometric Pressure Range | 8.86 to 32.48 inHg (300 to 1100 hPa) |
| Wireless Frequency | 433 MHz |
| Maximum Outdoor Sensors | 3 (included) |
| Weather Forecast | Based on barometric pressure trend |
| Atomic Time Sync | Yes (WWVB) |
| Alarm | Yes, with snooze |
| Backlight | Yes, adjustable |
| Mounting | Table stand or wall mount (bracket included) |
| Maintenance | Clean with soft, dry cloth. Avoid liquids. Replace batteries annually. |
| Safety | Do not expose to rain or direct sunlight. Keep away from water sources. |
| Spare Parts | Batteries, outdoor sensors, AC adapter available separately |
| Repairability | Replaceable parts; contact support for issues |
Frequently Asked Questions - WS-3000-X3 Ambient Weather
How do I set the time on the WS-3000-X3?
Press and hold the SET button for 3 seconds. Use the + and - buttons to adjust the hour, minute, and other settings. The clock will sync to WWVB atomic time automatically if available.
How do I sync the outdoor sensor with the console?
Insert batteries into the outdoor sensor and press the RESET button on both the sensor and console. The console will search for the signal. Ensure the sensor is within 300 feet of the console.
What do the weather forecast icons mean?
The console displays sunny, partly cloudy, cloudy, rainy, or stormy icons based on barometric pressure changes. Refer to the manual for detailed meanings.
How do I replace the batteries in the outdoor sensor?
Remove the sensor cover, insert two AA batteries (alkaline recommended) ensuring correct polarity, and reattach the cover. Press RESET on the sensor after battery change.
Why is the outdoor temperature not displaying?
Check that the outdoor sensor batteries are fresh and properly installed. Ensure the sensor is within range (300 ft) and the console is not obstructed. Press RESET on both units.
Can I add extra outdoor sensors?
Yes, the WS-3000-X3 supports up to 3 outdoor sensors. Additional sensors can be purchased separately and paired via the console menu.
How to clean the weather station?
Use a soft, lint-free cloth slightly dampened with water. Do not use abrasive cleaners or solvents. Avoid getting moisture into openings.
What does the BARO icon indicate?
The BARO icon shows the barometric pressure reading and trend (rising, falling, or steady). This helps predict short-term weather changes.
How do I mount the console on a wall?
Remove the table stand from the back of the console. Use a screw (not included) to attach the wall bracket to the wall, then hang the console.
The display is dim. How to adjust backlight?
Press the LIGHT button to cycle through brightness levels: high, medium, low, and off. The backlight will turn off after a few seconds to save battery.
User questions about WS-3000-X3 Ambient Weather
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual WS-3000-X3 - Ambient Weather and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS-3000-X3 by Ambient Weather.