HDDA2 - Uncategorized Eurosound - Free user manual and instructions
Find the device manual for free HDDA2 Eurosound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Channel Digital Audio Mixer |
| Brand | Eurosound |
| Model | HDDA2 |
| Dimensions (W x D x H) | Approx. 200 x 150 x 60 mm |
| Weight | Approx. 0.8 kg |
| Power Supply | USB Bus Power (5V DC) or optional 9V DC adapter (center positive) |
| Input Channels | 2 x XLR/TRS combo jacks (mic/line) |
| Outputs | 2 x TRS balanced line out, 1 x stereo headphone out (3.5mm) |
| USB Connection | USB-C for audio streaming and power (USB 2.0 compatible) |
| Sampling Rate | Up to 24-bit / 96 kHz |
| EQ | 3-band EQ per channel (Low, Mid, High) |
| Effects | Built-in digital effects (reverb, delay, chorus) with 16 presets |
| Phantom Power | +48V phantom power available on each mic input |
| Monitoring | Direct monitoring via headphone output, independent level control |
| Compatibility | Windows 10/11, macOS 10.12+, iOS (with camera adapter), Android (select devices) |
| Included Accessories | USB-C cable, quick start guide |
| Maintenance | Clean with a dry cloth; avoid liquids and extreme temperatures |
| Safety | Use only supplied or recommended power source; keep away from moisture |
| Spare Parts/Repairability | Contact Eurosound support for spare parts; device is not user-serviceable |
Frequently Asked Questions - HDDA2 Eurosound
How do I connect the Eurosound HDDA2 to my computer?
Connect the HDDA2 to your computer via the USB-C port using the included cable. The device should be recognized automatically. If not, install the latest driver from the Eurosound website.
Why is there no sound from my headphones?
Check that the headphone volume knob is turned up. Ensure the headphone jack is fully inserted. Also verify that the main mix is assigned to the headphone output in the software or via the monitor button.
Can I use phantom power with dynamic microphones?
It is not recommended to use +48V phantom power with dynamic microphones as it may damage them. Only use phantom power with condenser microphones that require it.
How do I reset the device to factory settings?
Press and hold the Preset/Reset button for 5 seconds while powering on. The LEDs will flash to confirm. Release the button to restore factory defaults.
Does the HDDA2 work with iOS devices?
Yes, with a compatible USB-C to Lightning adapter (for older iPhones) or direct connection to iPad Pro. Power may be higher, so a powered hub might be needed.
How can I update the firmware?
Download the firmware update tool from the Eurosound support page. Connect the device in update mode (hold down the FX button while connecting USB) and run the tool.
What is the maximum input level for the XLR inputs?
The mic inputs can handle up to +10 dBu before clipping. For line level, use the TRS input with a maximum of +22 dBu.
Can I record multiple tracks simultaneously?
The HDDA2 sends a stereo mix over USB, not individual channels. For multi-track recording, use a device with more outputs.
Why does my audio have latency?
Latency can be reduced by lowering the buffer size in your DAW or audio settings. For real-time monitoring, use the direct monitor feature.
What are the dimensions and weight?
The device measures approximately 200 x 150 x 60 mm and weighs about 0.8 kg, making it portable.
User questions about HDDA2 Eurosound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HDDA2 - Eurosound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDDA2 by Eurosound.