GRSDS-52D - Plate warmer Hatco - Free user manual and instructions
Find the device manual for free GRSDS-52D Hatco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Plate Warmer (Countertop) |
| Model | GRSDS-52D |
| Brand | Hatco |
| Dimensions (W x D x H) | 52 x 24 x 6 inches |
| Weight | 45 lbs |
| Power Supply | 208-240 V, 60 Hz, Single Phase |
| Wattage | 1500 W |
| Heating Type | Infrared quartz heating |
| Temperature Control | Adjustable thermostat (150°F - 400°F) |
| Construction Material | Stainless steel body with aluminum reflector |
| Indicator Light | Power-on indicator |
| Safety Features | Automatic shut-off on overheat; ETL listed |
| Installation Type | Countertop or drop-in |
| Plate Capacity | Up to 52 plates (standard dinner size) |
| Warm-Up Time | Approximately 15 minutes |
| Cleaning Instructions | Wipe with damp cloth; avoid abrasive cleaners |
| Repairability | Modular components: heating elements, thermostat, switches are replaceable |
| Spare Parts Availability | Contact Hatco authorized service centers |
| Warranty | 1 year parts and labor |
Frequently Asked Questions - GRSDS-52D Hatco
What is the recommended warm-up time for the Hatco GRSDS-52D?
The recommended warm-up time is approximately 15 minutes to reach operating temperature. Ensure the thermostat is set to desired level.
Can this plate warmer be used for holding other dishware besides plates?
Yes, it can warm platters, bowls, and other heat-resistant serving ware. However, avoid overloading or stacking items directly on the heating surface.
What is the maximum temperature setting?
The adjustable thermostat ranges from 150°F (65°C) to 400°F (204°C). Use lower settings for holding and higher for preheating.
How do I clean the Hatco GRSDS-52D?
Unplug the unit and allow it to cool. Wipe the exterior and reflector with a damp cloth and mild detergent. Do not use abrasive cleaners or immerse in water.
Does the unit have an automatic shut-off feature?
Yes, it is equipped with an overheat protection that automatically shuts off power if internal temperature exceeds safe limits. Reset by unplugging and allowing to cool.
What type of heating element does this model use?
It uses infrared quartz heating elements that provide even, efficient heat distribution without blowing air.
Can the unit be installed in a countertop cutout?
Yes, the GRSDS-52D is designed for drop-in installation. Refer to the manual for cutout dimensions and mounting instructions.
What is the power requirement for this warmer?
It requires 208-240 V, 60 Hz, single phase, and draws approximately 1500 watts. A dedicated circuit is recommended.
How do I replace a faulty heating element?
Disconnect power and remove the protective cover. The quartz element is held by clips; carefully remove and replace with an authorized Hatco part. Contact a service technician if unsure.
Where can I find spare parts or service for this model?
Contact an authorized Hatco service center or visit the Hatco website for genuine replacement parts. Use only Hatco-approved components for safety.
User questions about GRSDS-52D Hatco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Plate warmer in PDF format for free! Find your manual GRSDS-52D - Hatco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GRSDS-52D by Hatco.