Cock Fight Plus T - Guitar effect pedal Electro Harmonix - Free user manual and instructions

Product Type	Guitar Effects Pedal (Wah/Volume/Filter)
Brand	Electro Harmonix
Model	Cock Fight Plus T
Dimensions	Approx. 4.5 x 3.5 x 2 inches (11.4 x 8.9 x 5.1 cm)
Weight	Approx. 1 lb (0.45 kg)
Power Supply	9V DC center negative (2.1mm barrel, optional battery)
Current Draw	Approx. 10 mA
Input Impedance	1 MΩ
Output Impedance	100 Ω
Controls	Volume, Filter (Q), Wah/Bypass footswitch, Expression pedal input
Functions	Wah pedal, volume pedal, auto-wah, filter effects
Bypass	True bypass
LED Indicator	Effect status LED
Connectivity	1/4" input, 1/4" output, 1/4" expression pedal input
Construction	Metal chassis with rubber feet
Warranty	1 year limited (check manufacturer)
Country of Origin	China
Compatibility	Electric guitar, bass, other line-level instruments
Accessories Included	User manual, rubber feet (installed)
Cleaning	Wipe with dry cloth; avoid liquids

Frequently Asked Questions - Cock Fight Plus T Electro Harmonix

How do I power the Cock Fight Plus T?

Use a standard 9V DC power supply with center negative polarity (2.1mm barrel). A 9V battery can also be used for portable operation.

Can I use an expression pedal with it?

Yes, the Cock Fight Plus T has a dedicated expression pedal input for external control of the wah/filter sweep.

What does the 'T' in the model name stand for?

The 'T' likely indicates the 'T' series variant with improved features like true bypass and buffered output. Consult the manual for specifics.

How do I switch between wah and volume modes?

The Cock Fight Plus T combines wah and volume functions via the rocker pedal. The filter control adjusts the Q. Depressing the footswitch toggles effect on/off. Check the manual for exact mode switching.

What is the auto-wah feature?

Auto-wah uses envelope detection to automatically sweep the filter based on your playing dynamics. Adjust the filter knob to set the sweep range.

Why is the pedal not bypassing correctly?

Ensure the footswitch clicks firmly. The pedal uses true bypass; if you hear popping, try cleaning the input jacks. If issues persist, check connections and power.

Can I use this pedal with bass guitar?

Yes, it works well with bass due to its wide frequency range and filter control. Adjust the filter to taste.

What is the current draw and battery life?

Current draw is approximately 10 mA. A new 9V battery typically lasts 50-100 hours depending on usage. Always disconnect input when not in use to save battery.

How do I clean the pedal?

Unplug the pedal and wipe the exterior with a soft dry cloth. Avoid using liquids or cleaners as they may damage the electronics.

Is the Cock Fight Plus T suitable for pedalboard use?

Absolutely. Its compact size (4.5x3.5 inches) and true bypass make it pedalboard-friendly. Ensure sufficient clearance for the rocker pedal.

USER MANUAL Cock Fight Plus T Electro Harmonix

Wah and Talking Pedal with Fuzz

What happens when you mate our popular Cock Fight (Cocked Talking Wah with Fuzz) with a foot controlled rocker pedal? You get the Cock Fight Plus! The Cock Fight Plus can be switched between two types of filters: a traditional wah pedal filter ("CRY"), or a formant filter ("TALK") that you can use to create vowel sounds. Vary the sweep of either filter with the integrated foot pedal. The Cock Fight Plus also includes a FUZZ section that can be added before or after the filter, or taken out of the circuit entirely. Use the BOTTOM and BIAS controls to explore even more tone shaping possibilities.

CONTROLS

ENTERING/EXITING BYPASS

Toggle between buffered bypass and effect mode by firmly pushing the Cock Fight Plus pedal downward, in the toe direction, until you hear a click from its footswitch.

Please Note: The Cock Fight Plus does not provide a visual indication that it is in either effect or bypass mode or that it is powered up.

While in effect mode, rock your foot back and forth on the pedal to sweep the filter and alter the tone of your instrument.

COCKING THE COCK FIGHT PLUS

You may find your tone is especially sweet at certain spots along the pedal's sweep. When you hit just the right spot, carefully remove your foot from the pedal so that the tone remains fixed. This use of the pedal is commonly referred to as a "cocked wah."

VOL Knob

Use the VOL (volume) knob to adjust the master output volume.

CRY/TALK Toggle Switch

The “up” position selects the CRY setting. CRY simulates the type of filter found in a typical wah pedal circuit. The “down” position selects the TALK setting. This setting—as its name implies—produces throaty/vocal vowel sounds.

FUZZ PRE/X/POST Toggle Switch

The PRE position places the fuzz before the filter. Use this position for a more vintage Hendrix vibe. The position marked X removes the fuzz entirely from the circuit. The POST position places the fuzz after the filter and yields a more modern sound.

BOT Knob

The BOT (BOTTOM) Knob is a low frequency boost control that is slightly above unity gain when set fully clockwise. Set this knob fully counterclockwise to remove the BOTTOM circuit from the signal path.

TIP: When used with a bass guitar or other low frequency sources, the BOTTOM adjustment can help retain the bottom end typically lost along certain positions of the filter sweep.

TONE Knob

Use the TONE knob to vary the fuzz sound from dark to bright.

BIAS Knob

The BIAS knob controls the amount of bias voltage supplied to one of the two transistors in the fuzz circuit. Turn the BIAS knob fully clockwise to supply a nominal voltage to produce a "normal" fuzz sound. Turn the bias control down (counterclockwise) to decrease the bias voltage to get the so-called "dying battery" sound. This type of sound is characterized by a decrease in sustain and by notes that get choked off as you play with less force.

DRIVE Knob

Set the amount of fuzz with the DRIVE knob.

INPUT/OUTPUT/POWER/SPECS

INPUT Jack

This 14 " jack is the audio input for the Cock Fight Plus.

OUTPUT Jack

This 14 " jack is the audio output for the Cock Fight Plus.

POWER

Internal Battery Plug a cable into the INPUT jack to activate power from the included internal 9V battery. When using battery power, unplug the input cable from the input jack when the unit is not in use to avoid running down the battery. The pedal's battery may be left in or taken out when the external AC Adapter is in use.

External 9VDC AC Power The power jack input (marked 9V) is located next to the OUTPUT jack. Use a 9VDC AC Adapter capable of delivering at least 50 mA of current to power the pedal. The inner ring of the 9VDC AC Adapter must be negative, and the outer ring positive. You may choose to obtain the optional Electro-Harmonix 9.6DC-200 power supply, which is the same type of 9.6 Volts DC/200mA power supply as used by Boss® & Ibanez®.

Please Note: Using the wrong adapter or a plug with the wrong polarity may damage your Cock Fight Plus and void the warranty.

CHANGING THE BATTERY

1. We recommend the use of 9V alkaline batteries.
2. Locate the battery door on the underside of the pedal.
3. Push the tab of the battery door towards OPEN to unlock the door; pull the door up until it locks into its open position.
4. Connect your new 9V battery to the wired battery connector.
5. Insert/slide the 9V battery into the battery holder compartment.
6. Push the battery door down and firmly snap it closed.

NOTES AND SPECIFICATIONS

• The Cock Fight Plus utilizes a high quality buffered bypass.
• Input Impedance: 1MΩ
  • Nominal Output Impedance: 3kΩ
• Current draw: 30mA

WARRANTY INFORMATION

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at [e-mail] or [phone]. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include—with your returned unit—a written description of the problem as well as your name, address, telephone number, e-mail address, RA# and a copy of your receipt clearly showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

55-01 2ND STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: [phone]

Tel: [phone]

Email: [e-mail]

Email: [e-mail]

FCC COMPLIANCE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules.