AVN-DIO16 - Processor Sonifex - Free user manual and instructions
Find the device manual for free AVN-DIO16 Sonifex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Audio Processor |
| Brand | Sonifex |
| Model | AVN-DIO16 |
| Dimensions (W x D x H) | 483 x 200 x 44 mm (19-inch, 1U) |
| Weight | 2.5 kg |
| Power Supply | 100-240V AC, 50/60 Hz, 20W max |
| Audio Inputs | 16 x AES/EBU (XLR), 16 x Analog (XLR) |
| Audio Outputs | 16 x AES/EBU (XLR), 16 x Analog (XLR) |
| Digital Processing | Sample rate conversion, delay, gain, filtering |
| Control Interface | Ethernet (TCP/IP), RS-232, GPI/O |
| Supported Sample Rates | 32, 44.1, 48, 96 kHz |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 10-90% non-condensing |
| Mounting | 19-inch rack mount, 1U |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Class I equipment; use grounded outlet |
| Spare Parts | Contact Sonifex for replacement power supply, modules |
| Reparability | Repairs by authorized service center only |
| Warranty | 2 years from date of purchase |
Frequently Asked Questions - AVN-DIO16 Sonifex
How do I connect the AVN-DIO16 to my mixing console?
Use AES/EBU digital cables (XLR) for digital connections or balanced analog cables for analog I/O. Ensure sample rates match between devices.
Can I control the processor via network?
Yes, the AVN-DIO16 supports Ethernet control (TCP/IP). Use the dedicated software or send commands via RS-232.
What is the power consumption of the device?
Maximum power consumption is 20W. It has a universal power supply (100-240V AC).
How do I perform a factory reset?
Press and hold the reset button on the rear panel for 5 seconds while powering on. This restores default settings.
Is the AVN-DIO16 compatible with 96 kHz sample rate?
Yes, it supports sample rates from 32 to 96 kHz, including 44.1 and 48 kHz.
Can I use the analog inputs simultaneously with digital inputs?
Yes, you can mix analog and digital inputs as long as the sample rate is consistent across all channels.
What type of connectors are used for GPI/O?
The GPI/O uses a 15-pin D-sub connector. Pinout is provided in the manual.
How do I update the firmware?
Download the latest firmware from Sonifex website. Transfer via Ethernet using the update tool, with the device in update mode.
What should I do if the device overheats?
Ensure proper ventilation around the rack. Check that fans are unobstructed. If issue persists, contact support.
Can I mount multiple units in a single rack?
Yes, the 1U form factor allows stacking. Leave at least 1U space between units for airflow.
User questions about AVN-DIO16 Sonifex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual AVN-DIO16 - Sonifex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVN-DIO16 by Sonifex.