RHD-9035 - Hammer Ozito - Free user manual and instructions
Find the device manual for free RHD-9035 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Demolition Hammer |
| Model | RHD-9035 |
| Brand | Ozito |
| Power Source | Electric Corded |
| Voltage | 230 V AC |
| Frequency | 50 Hz |
| Power Input | 1500 W |
| Impact Energy | 15 J |
| No-Load Speed | 0 - 1500 BPM |
| Drill Chuck Type | SDS-Plus |
| Max Drilling Diameter (Concrete) | 35 mm |
| Vibration Level | 15 m/s² |
| Sound Pressure Level | 95 dB(A) |
| Weight | 12 kg |
| Dimensions (L x W x H) | 500 x 120 x 280 mm |
| Main Functions | Hammering only, chiseling, chisel positioning |
| Safety Features | Overload protection, double insulated, lock-on button |
| Maintenance | Regular carbon brush check, ventilation cleaning |
| Accessories Included | Chisel set, side handle, depth stop, carrying case |
| Repairability | Replaceable brushes, service center support |
Frequently Asked Questions - RHD-9035 Ozito
How do I change the chisel on the Ozito RHD-9035?
To change the chisel, first unplug the tool. Rotate the chuck sleeve counterclockwise to loosen it. Insert the SDS-Plus chisel with the groove aligned and push until it locks. Rotate the sleeve clockwise to tighten. Always wear gloves to avoid cuts.
What is the correct way to lubricate the hammer?
The Ozito RHD-9035 requires regular lubrication of the hammer mechanism. Use a recommended grease for rotary hammers. Apply a small amount into the SDS-Plus adapter after every 10 hours of heavy use. Avoid over-greasing.
Can I use the RHD-9035 for drilling holes?
The RHD-9035 is a demolition hammer primarily designed for chiseling and light breaking. It does not have a rotation mode for drilling. For drilling, consider an Ozito rotary hammer drill model.
Why does my hammer stop suddenly during use?
Sudden stops can be due to overload protection triggering. Reduce pressure on the tool. Also check the power cord for damage and ensure the carbon brushes are not worn. If the problem persists, contact Ozito service.
How do I adjust the chisel position?
The RHD-9035 features a chisel positioning function. Turn the mode selector to the chisel position icon (usually a hammer with arrow). Rotate the chisel to the desired angle, then rotate the mode dial back to the hammer only position to lock it.
What safety gear should I use with this tool?
Always wear safety goggles, ear protection, a dust mask, and heavy-duty gloves. The RHD-9035 produces high vibration, so use anti-vibration gloves. Ensure the side handle is securely attached for control.
How often should I replace the carbon brushes?
Check carbon brushes every 30-40 hours of use. Replace them when they are less than 6 mm long. Use genuine Ozito brushes to avoid damage. After replacement, run the tool for 5 minutes at no load to seat them.
Can I use the hammer in wet conditions?
No, the RHD-9035 is not rated for wet conditions. It is double insulated for electrical safety but not waterproof. Using it in rain or wet environments increases the risk of electric shock. Keep it dry.
What is the maximum chisel width for this model?
The recommended maximum chisel width is 50 mm (2 inches) for flat chisels. For point chisels, use up to 25 mm diameter. Larger chisels may overload the motor or reduce impact efficiency.
How do I store the hammer when not in use?
Clean the tool after each use. Store in the carrying case in a dry, well-ventilated area. Keep away from children. Remove the chisel before storage and lightly grease the SDS shank to prevent rust.
User questions about RHD-9035 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hammer in PDF format for free! Find your manual RHD-9035 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RHD-9035 by Ozito.