PG 18V - Paint gun Biltema - Free user manual and instructions
Find the device manual for free PG 18V Biltema in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Paint Gun |
| Brand | Biltema |
| Model | PG 18V |
| Battery Voltage | 18 V |
| Battery Type | Li-Ion (compatible with Biltema 18V system) |
| Paint Container Capacity | 800 ml |
| Max Flow Rate | Approx. 500 ml/min |
| Nozzle Size | 1.5 mm (standard), 2.0 mm optional |
| Spray Pattern | Adjustable: horizontal, vertical, circular |
| Viscosity Range | Up to 50 DIN-s (thin to medium paints) |
| Weight (without battery) | 1.4 kg |
| Dimensions (L x W x H) | 250 x 100 x 260 mm |
| Housing Material | High-impact plastic |
| Included Accessories | Viscosity cup, cleaning brush, user manual |
| Operating Temperature | 5°C to 40°C |
| Safety Features | Trigger lock, anti-drip nozzle tip |
| Maintenance | Clean immediately after use with appropriate solvent |
| Spare Parts Availability | Nozzle sets, seals, battery (via Biltema) |
| Warranty | 2 years |
Frequently Asked Questions - PG 18V Biltema
What types of paint can I use with the PG 18V?
The paint gun is suitable for water-based and solvent-based paints, as well as primers, varnishes, and stains. Always thin the paint to the recommended viscosity (max 50 DIN-s) for optimal results.
How do I clean the paint gun after use?
Disconnect the battery. Empty any remaining paint. Rinse the container and spray mechanism with water for water-based paints or mineral spirits for solvent-based paints. Use the included cleaning brush to unclog the nozzle. Allow to dry before storage.
What is the battery runtime?
Runtime depends on battery capacity and paint viscosity. With a standard 2.0 Ah battery, you can expect approximately 20–30 minutes of continuous spraying. For longer jobs, use a higher capacity battery.
Can I adjust the spray pattern?
Yes, the nozzle can be rotated to achieve horizontal, vertical, or circular spray patterns. The flow rate can also be adjusted via the knob on the trigger.
Is the paint gun compatible with other 18V batteries?
It is designed for Biltema's 18V battery system. Compatibility with other brands is not guaranteed and may affect performance or safety.
What safety precautions should I take?
Always wear safety goggles and a respirator mask when spraying. Work in a well-ventilated area. Keep the tool away from heat sources and flammable materials. Use the trigger lock when not in use.
How do I thin the paint correctly?
Use the included viscosity cup. Fill the cup with paint and time how long it takes to empty. The ideal time is 20–30 seconds for most paints. Adjust thinner accordingly.
Why is the spray sputtering?
Sputtering is usually caused by clogged nozzle, low battery voltage, or paint that is too thick. Clean the nozzle thoroughly and ensure paint viscosity is correct. Also check that the battery is fully charged.
Can I spray latex paint with this gun?
Yes, but latex paint must be thinned with water to a viscosity of about 30–40 DIN-s. Test on a scrap surface first.
Where can I find spare parts?
Spare parts such as nozzle kits, seals, and batteries are available at Biltema stores or through their online customer service. Refer to the user manual for part numbers.
User questions about PG 18V Biltema
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual PG 18V - Biltema and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PG 18V by Biltema.
USER MANUAL PG 18V Biltema
FÄRGSPRUTA SPR∅YTEPISTOL MAALIRUISKU MALERSPR∅JTE
PG 18 V
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration is in conformity with the relevant Community harmonization legislation:
| Directive/Regulation | Harmonised standard |
| 2006/42/EC | EN 60745-1:2009+A11:2010EN 50580:2012+A1:2013 |
| 2014/30/EU | EN 55014-1:2017EN 55014-2:2015 |
| 2011/65/EU | EN 63000:2018 |
Product Manager/Authorised to compile the technical file