QW-GT21F47EW-ES - Dishwasher SHARP - Free user manual and instructions
Find the device manual for free QW-GT21F47EW-ES SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freestanding dishwasher |
| Model | QW-GT21F47EW-ES |
| Brand | Sharp |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 40 kg |
| Energy class | E (energy efficiency class) |
| Water consumption per cycle | 9.5 L (Eco program) |
| Annual energy consumption | 294 kWh |
| Noise level | 47 dB(A) |
| Number of place settings | 14 |
| Number of programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Pre-rinse |
| Additional features | Half load, Delay start (1-24h), Child lock, Salt & rinse aid indicators |
| Interior material | Stainless steel |
| Water supply | Cold water only |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Current | 10 A |
| Power consumption | 2000 W |
| Spare parts availability | Up to 10 years after end of production |
| Repair index | 7.2/10 (estimated) |
| Maintenance | Clean filters regularly, descale monthly, wipe door seals |
| Safety features | Anti-flood system, child lock, overheating protection |
Frequently Asked Questions - QW-GT21F47EW-ES SHARP
How do I install the dishwasher?
Ensure the appliance is placed on a flat, stable surface. Connect the water inlet hose to a cold water supply (3/4 inch threaded tap). Plug the power cord into a grounded outlet. Level the dishwasher using adjustable feet. Refer to the installation manual for detailed steps.
What are the different wash programs and when should I use them?
The dishwasher offers 6 programs: Eco (50°C, energy-saving), Intensive (70°C, heavily soiled pans), Normal (65°C, daily loads), Quick (45°C, lightly soiled, 30 min), Glass (40°C, delicate items), and Pre-rinse (cold, to keep dishes fresh until full load).
The dishwasher is not cleaning dishes properly. What can I do?
Check that the spray arms are not blocked and rotate freely. Clean the coarse and fine filters under running water. Ensure you are using the correct detergent and that the rinse aid dispenser is filled. Also verify that the water temperature reaches at least 50°C. Run a machine cleaner program if needed.
How do I clean the filters?
Turn off the dishwasher and remove the lower rack. Unscrew the cylindrical filter assembly (turn counterclockwise) and lift out the flat filter. Rinse both filters under warm water using a brush. Reassemble and ensure they click into place. Clean filters every 2-3 weeks.
An error code E1 appears on the display. What does it mean?
Error code E1 indicates a water leak or a problem with the anti-flood system. First, turn off the water supply and unplug the dishwasher. Check for visible water on the floor or in the base tray. If the tray has water, clean it and check connections. If the error persists, contact Sharp service.
Can I open the dishwasher during a cycle?
Yes, you can open the door during operation; the dishwasher will pause automatically. Be careful of hot steam. Close the door and press Start to resume the cycle after a few seconds. Do not leave the door open for extended periods.
How much salt and rinse aid should I use?
Fill the salt reservoir with dishwasher salt (approx. 1-1.5 kg) and set the water hardness level (see manual). For rinse aid, fill the dispenser to the maximum level; adjust the dosage setting between 1-6 depending on drying results. The indicators on the control panel will remind you when to refill.
Why is there standing water in the bottom at the end of a cycle?
This may be due to a blocked filter or drain hose. First, clean the filters. Check that the drain hose is not kinked or clogged. Ensure the drain hose is installed at a height of 40-100 cm. If the issue continues, the drain pump may be defective.
What is the delay start feature and how do I use it?
The delay start allows you to program the dishwasher to start after a set time (1 to 24 hours). Load the dishwasher, select a program, then press the Delay button repeatedly to choose the delay time (e.g., 3h). Close the door and press Start. The dishwasher will count down and start automatically.
Is the dishwasher safe for all types of dishes?
This dishwasher is suitable for most dishes marked dishwasher-safe. Avoid placing items made of wood, pewter, copper, silver, or hand-painted china in the dishwasher. For delicate glassware, use the Glass program. Always check the manufacturer's recommendations for your items.
User questions about QW-GT21F47EW-ES SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual QW-GT21F47EW-ES - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QW-GT21F47EW-ES by SHARP.