Broadcast - Television Newline - Free user manual and instructions

Product Type	Portable PA System / Broadcast Speaker
Model	Broadcast by Newline
Dimensions (H x W x D)	30 cm x 20 cm x 15 cm
Weight	2.5 kg
Power Supply	Rechargeable battery (lithium-ion, 7.4V 2200mAh) and AC adapter (100-240V, 50/60Hz)
Battery Life	Up to 6 hours at moderate volume
Main Functions	Built-in dynamic microphone, Bluetooth 5.0 audio streaming, FM radio, USB and microSD playback, AUX input, voice broadcast (PA mode)
Audio Output	30W RMS (peak 50W), frequency response 50 Hz - 20 kHz
Connectivity	Bluetooth (range up to 10m), 3.5mm AUX input, USB-A, microSD slot
Controls	Volume dial, microphone volume, mode button, playback controls (play/pause, track skip), power switch
Indicators	LED power and charging indicator, Bluetooth pairing light
Material	ABS plastic with metal grille, rubber feet
Water Resistance	IPX4 (splash-proof)
Maintenance & Cleaning	Wipe with a soft dry cloth; do not use liquid cleaners; keep vents free from dust
Safety	Do not disassemble, expose to moisture, or use near water; avoid extreme temperatures; unplug when not in use
Spare Parts & Repairability	Replacement battery and charger available from authorized service centers; contact Newline support for repairs
General Information	Suitable for indoor and outdoor use; ideal for announcements, presentations, and small events

Frequently Asked Questions - Broadcast Newline

How do I turn on the Broadcast speaker?

Press and hold the Power button for 2 seconds until you hear a startup tone and the LED lights up.

How do I pair via Bluetooth?

Turn on the speaker, then press the Bluetooth button. The LED will flash blue. On your device, select 'Newline Broadcast' from the Bluetooth list.

Can I use the microphone while playing music?

Yes, the built-in microphone works in PA mode and will override the music when you speak. Use the microphone volume dial to adjust.

How do I charge the battery?

Connect the included AC adapter to the DC IN port. The LED will turn red while charging and green when fully charged.

What does the FM radio require?

The speaker has a built-in antenna; just press the Mode button until 'FM' appears. To autoscan, press and hold the Play/Pause button.

Why is there no sound from the speaker?

Check if the speaker is powered on and volume is up. Ensure the source device is connected properly (Bluetooth paired, cable inserted). Try a different source.

How can I reset the speaker?

If the speaker is unresponsive, press the Reset button (small hole) using a paperclip for 3 seconds.

Is the speaker waterproof?

It has an IPX4 rating, meaning it is splash-proof but not submersible. Avoid rain or direct water spray.

Can I use it while charging?

Yes, you can operate the speaker while it is plugged into the AC adapter.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format. Search for 'Newline Broadcast'.

USER MANUAL Broadcast Newline

Support and user guide

29 July 2019

Getting Started

The Broadcast software will be preinstalled on devices and therefore, no installation of software is required. The Broadcast client is a web-based application, which requires a web browser.

Recommended specification

Newline screen

• CPU : 4x ARM Cortex-A53 @1,40 GHz, MStar,
- RAM 1.5 GB
- Android 5.0.1, Api Level 21
- Resolution 1080p

WebClient Supported browsers

• Chrome 57
• Firefox 53
• Opera 12
• Safari 12

Minimum network requirements

Network speed: 2.5Mbps on each device

Firewall Rules

These ports must be allowed to give access for video streaming:

• TCP 80, 443, 3478, 5379, 19305 and 19307
- UDP 0-65535

Starting a broadcast

Sharing your screen

A session is started by opening the Broadcast application and interacting with the “Start broadcast” button.

Public Share Link

Each broadcast will create its own unique URL, which can be copied to the clipboard and shared with users.

Enlarge

Users can interact with the “Enlarge” option to enlarge the broadcast information. This is designed to help users view the broadcast information from afar.

Broadcast session

Joining a broadcast

Joining a session can be achieved through one of the methods below:

• By using the link sent by the broadcast host.
• By navigating to the URL http://displaynote.com/broadcast and using the unique 6-digit Broadcast ID to join the session, as shown in the screenshot below:

Leaving a broadcast

Leaving a session is achieved by interacting with the “Stop” button while a broadcast is active.