HK 3475 - Receiver HARMAN KARDON - Free user manual and instructions
Find the device manual for free HK 3475 HARMAN KARDON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Harman Kardon |
| Model | HK 3475 |
| Power Output (Continuous) | 100 W per channel (8 ohms, 20 Hz - 20 kHz, <0.08% THD) |
| Frequency Response | 20 Hz - 20 kHz (+0/-0.5 dB) |
| Total Harmonic Distortion | <0.08% (at rated power) |
| Signal-to-Noise Ratio | 110 dB (IHF-A, line input) |
| Input Sensitivity | 150 mV (line), 2.5 mV (phono MM) |
| Input Impedance | 47 kohms (line), 47 kohms (phono) |
| Audio Inputs | Phono (MM), CD, Tuner, Aux, Tape 1 & 2 |
| Audio Outputs | Pre-out, Subwoofer out, Tape rec 1 & 2, Headphone jack |
| Speaker Impedance | 4 - 16 ohms |
| Tuner Section | AM/FM with 30 presets |
| Dimensions (W x H x D) | 440 x 135 x 425 mm (17.3 x 5.3 x 16.7 in) |
| Weight | 12.5 kg (27.5 lb) |
| Power Consumption | 400 W (max), <1 W (standby) |
| Remote Control | Included (IR) |
| Special Features | High-current capability, discrete circuitry, gold-plated terminals |
| Maintenance & Cleaning | Wipe with dry cloth; do not use solvents; keep vents clear |
| Safety | Class 2, disconnect power before cleaning; avoid moisture |
| Spare Parts & Reparability | Contact authorized service centers; use original parts |
Frequently Asked Questions - HK 3475 HARMAN KARDON
How do I connect speakers to the HK 3475?
Use speaker wire with banana plugs or bare wire. Connect the red terminal to the positive speaker cable and black to negative. Ensure impedance is between 4 and 16 ohms.
What is the maximum power output of the HK 3475?
It delivers 100 watts per channel continuous into 8 ohms from 20 Hz to 20 kHz with less than 0.08% THD.
How do I set up the FM/AM tuner?
Press the TUNER button, then use the TUNING knob to select frequency. Press MEMORY and then PRESET number to store stations. Up to 30 presets are available.
Why is there no sound from my speakers?
Check that SPEAKERS A or B is selected on the front panel. Verify connections are secure. Ensure the input source is correct and volume is turned up.
How do I clean the HK 3475?
Unplug the unit. Use a soft, dry cloth for the exterior. Do not use any liquids or abrasive cleaners. Vacuum vents gently to prevent overheating.
Can I connect a turntable?
Yes, use the PHONO input, which supports moving magnet (MM) cartridges. If your turntable has a built-in preamp, use a line-level input instead.
How do I reset the receiver to factory settings?
While the unit is on, press and hold the MEMORY button for 5 seconds until the display flashes. Then turn off and on again.
What is the standby power consumption?
The receiver consumes less than 1 watt in standby mode.
How do I connect a subwoofer?
Use a mono RCA cable from the SUBWOOFER OUT jack to the subwoofer's input. Ensure the subwoofer is powered or amplified.
Where can I get spare parts?
Contact Harman Kardon authorized service centers or check their website for official parts. Use only original parts to maintain performance.
User questions about HK 3475 HARMAN KARDON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HK 3475 - HARMAN KARDON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HK 3475 by HARMAN KARDON.
