PA-100 - Barcode Reader Argox - Free user manual and instructions
Find the device manual for free PA-100 Argox in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Brand | Argox |
| Model | PA-100 |
| Scanning Technology | Laser (650 nm) |
| Scan Angle | 42° |
| Supported Barcodes | 1D: Code 39, Code 128, EAN, UPC, etc. |
| Interface | USB HID, RS232 |
| Dimensions (H x W x D) | 160 x 60 x 30 mm |
| Weight | 150 g |
| Power Source | Rechargeable Li-Ion battery, 3.7V 1000mAh |
| Battery Life | Up to 8 hours continuous scanning |
| IP Rating | IP54 (dust and splash resistant) |
| Drop Resistance | 1.5 m onto concrete |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance & Cleaning | Clean lens with a soft, dry cloth; avoid solvents |
| Safety | Class 2 laser product; avoid direct eye exposure |
| Spare Parts & Repairability | Replaceable battery, cable, and scan engine; user manual available |
| General Information | Designed for retail, warehouse, and logistics applications |
Frequently Asked Questions - PA-100 Argox
How do I connect the PA-100 to my computer?
Use the provided USB cable. Plug the square end into the scanner and the rectangular end into your computer. The scanner will automatically power on and be recognized as a HID keyboard or COM port depending on configuration.
What types of barcodes can the PA-100 scan?
The PA-100 supports most common 1D barcodes, including Code 39, Code 128, EAN-13, UPC-A, Interleaved 2 of 5, and more.
How to perform a factory reset?
Press and hold the trigger button while powering on the scanner. Continue holding for 5 seconds until the LED flashes rapidly. Release the trigger; the scanner will reset to default settings.
How do I clean the scanner lens?
Use a soft, lint-free cloth lightly dampened with water or lens cleaner. Gently wipe the lens in a circular motion. Do not use abrasive materials or solvents.
What does the blinking LED indicate?
A steady green LED means ready to scan. A red LED indicates low battery. Flashing red/green during charging. A quick blue flash after a successful scan.
Can the PA-100 scan barcodes from a smartphone screen?
Yes, but performance may vary. The laser scanner works best on printed barcodes. For optimal digital screen scanning, reduce screen brightness and hold the scanner about 10-15 cm away.
How long does the battery last?
Under normal usage, the battery lasts up to 8 hours. Full recharge takes approximately 2.5 hours. The battery is replaceable; part number BA-100.
What should I do if the scanner does not read barcodes?
First, clean the lens. Then check if the laser is active (listen for a click). Ensure the barcode is not damaged. Try scanning a test barcode from the manual. If still not working, perform a factory reset.
Is the PA-100 compatible with Android or iOS devices?
Yes, when connected via USB OTG cable (for Android) or Lightning to USB adapter (for iOS), the scanner works as a keyboard input. Some apps may require configuration.
How do I configure the scanner?
Configuration is done by scanning special barcodes from the user manual. These include setting interface, barcode symbologies, prefixes/suffixes, and beeper volume. The manual is available for free download at the product page.
User questions about PA-100 Argox
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual PA-100 - Argox and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA-100 by Argox.