OR9011 - Radio PHILIPS - Free user manual and instructions
Find the device manual for free OR9011 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable AM/FM Radio |
| Dimensions (Approx.) | 220 x 130 x 85 mm |
| Weight (Approx.) | 0.6 kg |
| Power Source | AC 220-240V 50/60Hz or 4 x LR14 (C) batteries |
| Frequency Range FM | 87.5 - 108 MHz |
| Frequency Range AM | 530 - 1600 kHz |
| Preset Stations | 20 (10 FM, 10 AM) |
| Alarm Function | Dual alarm with snooze, wake to radio or buzzer |
| Display | LED digital display with clock |
| Speaker | Built-in 8 cm dynamic speaker, 3W output |
| Headphone Jack | 3.5 mm stereo |
| Antenna | FM: telescopic; AM: built-in ferrite |
| Power Consumption (Max) | 8 W |
| Standby Power | < 1 W |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquids or abrasives. |
| Safety Instructions | Do not expose to rain or moisture. Use only specified power adapter. |
| Battery Safety | Do not mix old and new batteries. Remove if not used for extended period. |
| Repairability | Refer to authorized service center. No user-serviceable parts inside. |
| Spare Parts Availability | Contact Philips support for replacement parts (e.g., antenna, adapter). |
| Country of Origin | China |
Frequently Asked Questions - OR9011 PHILIPS
How do I set the clock on the Philips OR9011?
Press and hold the Time Set button until the hour digits flash. Use the + / - buttons to adjust the hour, press Time Set again to adjust minutes, then press again to confirm.
How do I set an alarm?
Press the Alarm 1 or Alarm 2 button repeatedly to cycle through alarm modes (Off, Radio, Buzzer). When the hour flashes, adjust with + / -, press the same alarm button to set minutes, then press Alarm Set to confirm.
Can I use batteries to power the radio?
Yes, the Philips OR9011 can be powered by 4 x LR14 (C) batteries when not connected to AC power. Battery life is approximately 30 hours at moderate volume.
How do I store radio stations as presets?
Tune to the desired station, then press and hold one of the Preset buttons (0-9) until you hear a beep. The station is saved. You can store up to 10 FM and 10 AM presets.
Why is the FM reception weak?
Fully extend the telescopic antenna. If reception is still poor, try moving the radio near a window or away from electronic devices. For AM, rotate the unit to align the built-in ferrite antenna.
How do I switch between FM and AM?
Press the Band button to toggle between FM and AM. The current band is shown on the display.
What should I do if the radio does not turn on?
Check if the power cord is securely connected or if batteries are inserted correctly. Try using fresh batteries or a different AC outlet. If the problem persists, contact Philips support.
How do I clean the radio?
Unplug the radio and remove batteries. Wipe the exterior with a soft, dry cloth. Do not use water, alcohol, or abrasive cleaners. Keep the speaker grille dust-free with a brush.
Can I connect headphones to the radio?
Yes, there is a 3.5 mm headphone jack on the side. Inserting headphones will mute the built-in speaker.
How do I use the snooze function?
When the alarm sounds, press the Snooze button. The alarm will stop and sound again after 9 minutes. You can repeat this multiple times.
User questions about OR9011 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual OR9011 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OR9011 by PHILIPS.