4608 - Firewall Check Point - Free user manual and instructions
Find the device manual for free 4608 Check Point in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Firewall Appliance |
| Model | 4608 |
| Brand | Check Point |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.2 x 16.5 x 1.7 inches (43.7 x 41.9 x 4.3 cm) |
| Weight | Approximately 15 lbs (6.8 kg) |
| Power Supply | Dual redundant hot-swappable AC power supplies |
| Power Consumption | 150W typical |
| Network Interfaces | 8 x Gigabit Ethernet ports, 4 x SFP+ 10GbE ports |
| Management Ports | 1 x RJ45 console, 1 x USB |
| Firewall Throughput | 10 Gbps |
| VPN Throughput | 2 Gbps |
| IPS Throughput | 5 Gbps |
| Maximum Concurrent Connections | 1,000,000 |
| Operating System | Check Point Gaia OS |
| Security Features | Stateful inspection, VPN, IPS, antivirus, anti-bot, URL filtering, application control |
| High Availability | Active/Passive clustering supported |
| Cooling | 2 x hot-swappable fans |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Certifications | FCC, CE, UL |
Frequently Asked Questions - 4608 Check Point
How do I reset the Check Point 4608 to factory defaults?
To reset the device, press and hold the reset button on the front panel for 10 seconds until the status LED blinks. Alternatively, use the CLI command set factory-default after login.
What are the default login credentials for the 4608?
The default username is admin and password is admin. Change this immediately after initial setup for security.
How can I update the firmware on the Check Point 4608?
Download the latest Gaia OS image from the Check Point support portal. Access the web interface, go to Updates or System, upload the file, and follow prompts. Reboot after installation.
What RAID configuration does the 4608 support?
The 4608 supports hardware RAID 1 for the two internal SATA drives. Ensure both drives are installed to enable mirroring.
How do I configure a VPN on the Check Point 4608?
Use the web interface or CLI. Create a VPN community, define encryption domain, and set up IKE parameters. Refer to the manual for step-by-step instructions.
What is the maximum power consumption of the 4608?
The maximum power consumption is approximately 200W under full load. Typical consumption is 150W.
How many users can the 4608 support?
It can support up to 1,000 users with typical traffic patterns, depending on the security services enabled.
Can the 4608 be mounted in a rack?
Yes, the 4608 is designed for 1U rackmount. Use the included rackmount brackets and screws. Ensure proper ventilation.
How do I access the command line interface (CLI)?
Connect a serial console cable to the RJ45 console port. Use a terminal emulator with settings: 115200 baud, 8 data bits, no parity, 1 stop bit. Login with admin credentials.
What is the warranty period for the Check Point 4608?
The standard warranty is 1 year for hardware and 90 days for software. Extended support contracts are available.
User questions about 4608 Check Point
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Firewall in PDF format for free! Find your manual 4608 - Check Point and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4608 by Check Point.