VESR424D - Server B&B Electronics - Free user manual and instructions
Find the device manual for free VESR424D B&B Electronics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | B&B Electronics |
| Model | VESR424D |
| Dimensions (W x D x H) | 43.2 x 43.2 x 4.4 cm (1U rackmount) |
| Weight | 7.5 kg |
| Power Supply | 100-240 V AC, 50-60 Hz, 300W |
| Processor | Intel Xeon E-2288G (8 cores, 3.7 GHz) |
| Memory | 32 GB DDR4 ECC (max 128 GB) |
| Storage | 4x 3.5" SATA/SAS hot-swappable bays |
| Network | 4x Gigabit Ethernet ports |
| Operating Temperature | 10°C to 35°C |
| Humidity | 20% to 80% non-condensing |
| Cooling | 2x hot-swappable fans |
| Mounting | Rackmount 1U |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Disconnect power before cleaning; do not open |
| Spare Parts | Power supply, fan modules, drive caddies |
| Repairability | Modular components; user-replaceable parts |
Frequently Asked Questions - VESR424D B&B Electronics
How do I install the VESR424D server in a rack?
Ensure the rack is stable. Attach the rack rails to the server and slide it in, securing with screws. Refer to the manual for details.
What are the power requirements?
The server requires 100-240 V AC, 50-60 Hz, with a maximum power consumption of 300W. Use a dedicated circuit if possible.
How can I configure the network settings?
Access the BIOS or use the management interface. Set IP address, subnet mask, and gateway. Refer to the network configuration section.
What type of memory is supported?
DDR4 ECC registered memory, up to 128 GB. Use compatible modules for optimal performance.
How do I replace a faulty hard drive?
Identify the failed drive via the LED indicator. Remove it from the hot-swap bay and insert a new drive. The RAID controller will rebuild automatically.
What should I do if the server overheats?
Check the fans and airflow. Clean dust filters. Ensure ambient temperature is within 10-35°C. If issue persists, contact support.
How do I reset the administrator password?
Use the CMOS clear jumper on the motherboard. Power off, move jumper to clear position for 10 seconds, then restore. Password will reset to default.
Can I use this server for virtualization?
Yes, it supports VMware, Hyper-V, and other hypervisors. Ensure sufficient RAM and CPU cores.
How do I update the firmware?
Download the latest firmware from B&B Electronics website. Use the management tool or bootable USB to apply the update.
What is the warranty period?
Standard warranty is 3 years. Extended warranty options are available. Contact B&B Electronics for details.
User questions about VESR424D B&B Electronics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual VESR424D - B&B Electronics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VESR424D by B&B Electronics.