Gryphon M200 - Barcode Reader DATALOGIC - Free user manual and instructions
Find the device manual for free Gryphon M200 DATALOGIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Brand | Datalogic |
| Model | Gryphon M200 |
| Scan Technology | Laser |
| Scan Rate | 35 scans per second |
| Reading Distance | Up to 10 cm (0.33 mm barcode) |
| Interface | USB, RS232, Keyboard Wedge |
| Decode Capability | 1D codes (UPC/EAN, Code 128, etc.) |
| Power Supply | Powered via USB or external 5V adapter |
| Dimensions | 17.0 x 7.0 x 10.5 cm |
| Weight | 150 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 90% non-condensing |
| Drop Resistance | 1.5 m |
| Protection Class | IP30 |
| Laser Class | Class 1 (IEC 60825) |
| Cable Length | 2 m |
| Cleaning | Use a soft cloth dampened with mild detergent |
| Repairs | Contact Datalogic authorized service center |
Frequently Asked Questions - Gryphon M200 DATALOGIC
How do I connect the Gryphon M200 to my computer?
Connect the USB cable to your computer and scanner. The device should power on and may require driver installation. For RS232 or Keyboard Wedge interfaces, ensure proper configuration via programming barcodes from the manual.
How do I set up the barcode reader for the first time?
Plug the scanner into a power source via USB. Scan the setup barcodes provided in the manual to configure interface, termination characters, and other settings. The scanner beeps upon successful configuration.
What barcodes can it read?
The Gryphon M200 reads all standard 1D barcodes, including UPC/EAN, Code 128, Code 39, Interleaved 2 of 5, and Codabar. It cannot read 2D codes like QR or Data Matrix.
Why is my scanner not beeping?
Check that the scanner is powered and connected. If the beep is disabled, scan the enable beep programming barcode from the manual. Also ensure the barcode is readable and within the reading range.
How do I clean the scanner?
Use a soft, lint-free cloth slightly dampened with mild detergent or isopropyl alcohol. Avoid abrasive cleaners. Gently wipe the scan window and housing. Do not immerse the scanner.
Can I use it with a POS system?
Yes, the scanner can emulate a USB HID keyboard or serial device for POS integration. Configure the appropriate interface using programming barcodes. It works with most POS software.
What is the reading distance?
The reading distance depends on barcode density. For a typical 0.33 mm barcode, the maximum distance is 10 cm (4 inches). For larger codes, distance increases up to 25 cm (10 inches).
How do I reset to factory defaults?
Scan the factory reset programming barcode from the manual. This restores all settings to original. After reset, reconfigure interface and other parameters if needed.
Is the scanner compatible with my Android device?
Yes, if your Android device supports USB OTG. Connect via a USB OTG cable. The scanner acts as a keyboard and scans barcodes directly into text fields. No drivers required.
Where can I find the manual?
The manual is available for free download on the notice-facile.com product page or the Datalogic website. It includes programming barcodes, specifications, and troubleshooting.
User questions about Gryphon M200 DATALOGIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual Gryphon M200 - DATALOGIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Gryphon M200 by DATALOGIC.