MX726 - Vidéo-projecteur BENQ - Free user manual and instructions
Find the device manual for free MX726 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | BenQ |
| Model | MX726 |
| Display Technology | DLP |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3200 ANSI Lumens |
| Contrast Ratio | 13000:1 |
| Light Source | Lamp (up to 6000 hours in Eco Mode) |
| Lens | Manual Zoom & Focus |
| Keystone Correction | Vertical (±40°) |
| Inputs | VGA, HDMI, Composite, S-Video, Audio (3.5mm) |
| Outputs | VGA-Out, Audio-Out |
| Internal Speaker | 10W Mono |
| Noise Level (Eco Mode) | 30 dB |
| Power Consumption | 300W (Normal), <1W (Standby) |
| Dimensions (W x H x D) | 312 x 104 x 244 mm |
| Weight | 2.8 kg |
| Security | Kensington Lock, Password Protection |
| Maintenance | Clean air filter every 2000 hours; replace lamp when indicator shows |
Frequently Asked Questions - MX726 BENQ
How do I connect my laptop to the BenQ MX726?
Use a VGA or HDMI cable to connect your laptop to the corresponding input port on the projector. Select the correct source using the Source button on the remote or projector.
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal screen, the BenQ MX726 typically requires a distance of about 3.0 to 4.8 meters, depending on zoom setting. Refer to the user manual for exact calculations.
How can I clean the projector's air filter?
Turn off and unplug the projector. Remove the filter cover on the side, take out the filter, and gently vacuum or wash it with mild soap and water. Let it dry completely before reinstalling. Clean every 2000 hours.
Why is the projector showing 'Lamp Life Exceeded'?
This indicates the lamp has reached its maximum hours. Replace the lamp with a compatible BenQ lamp module (Model: 5J.J2L05.001). Reset the lamp timer via the Settings menu after replacement.
Can I use the projector for 3D content?
Yes, the MX726 supports DLP-Link 3D. You need 3D glasses compatible with DLP-Link and 3D content played from a compatible source via HDMI.
How do I adjust keystone correction?
Press the Keystone key on the remote or projector. Use the arrow keys to correct vertical distortion (±40°). For best image quality, place the projector perpendicular to the screen.
What should I do if the projector overheats?
Ensure the projector has adequate ventilation (at least 30 cm clearance). Clean the air filter. Avoid blocking the exhaust. If problem persists, contact service.
How often should I replace the lamp?
The lamp lasts up to 4000 hours in Normal mode and 6000 hours in Eco mode. Replace when brightness diminishes or the lamp indicator lights up.
Can I mount the projector on the ceiling?
Yes, the MX726 is ceiling-mountable. Use a compatible projector mount (e.g., BenQ CM-01). Ensure the mount supports the weight (2.8 kg) and ceiling attachment is secure.
How do I perform a factory reset?
Go to the System Setup > Reset Settings menu and choose Reset All. Confirm to restore default settings. Wait for projector to restart.
User questions about MX726 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vidéo-projecteur in PDF format for free! Find your manual MX726 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX726 by BENQ.