H50083 - Router HiRO - Free user manual and instructions
Find the device manual for free H50083 HiRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | HiRO |
| Model | H50083 |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Ethernet Ports | 4x 10/100 Mbps LAN, 1x 10/100 Mbps WAN |
| Antennas | 2x External fixed antennas |
| Power Supply | 12V DC, 1A |
| Dimensions (W x D x H) | 200 x 150 x 30 mm |
| Weight | 300 g |
| Security Encryption | WEP, WPA, WPA2 |
| Management Interface | Web-based GUI |
| DHCP Server | Built-in |
| NAT Support | Yes |
| Firewall | SPI Firewall |
| Maintenance | Keep firmware updated; clean with dry cloth when unplugged |
| Safety Precautions | Do not expose to water or heat; use only provided power adapter |
| Spare Parts Availability | Power adapter and antennas available from manufacturer |
| Repairability | Professional repair recommended; no user-serviceable parts |
| General Information | Suitable for home or small office use |
Frequently Asked Questions - H50083 HiRO
How to reset the HiRO H50083 router to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds using a paper clip. The router will reboot with factory settings.
What is the default IP address to access the router settings?
The default IP address is 192.168.1.1. Enter it in your browser to access the web interface.
How to change the Wi-Fi password on the HiRO H50083?
Log in to the router's web interface, go to Wireless Settings, and update the security key or passphrase.
Can I use the router with a DSL modem?
Yes, connect the DSL modem to the WAN port of the router using an Ethernet cable.
What should I do if I forget my router's password?
Perform a factory reset (see above) to clear the password. After reset, use the default credentials (admin/admin).
Does the HiRO H50083 support IPv6?
Yes, the router supports IPv6 connectivity. Enable it in the Advanced Network settings.
How many devices can connect simultaneously?
Typically up to 20 devices, depending on bandwidth usage and interference.
Is the router compatible with Wi-Fi 5 (802.11ac) devices?
No, it only supports 802.11b/g/n at 2.4 GHz, not 5 GHz or ac.
How to update the firmware on the HiRO H50083?
Download the latest firmware from the manufacturer's website, then upload it via the Firmware Upgrade page in the router's settings.
What is the range of the router?
Indoor range is approximately 30 meters, outdoor up to 100 meters in open space.
User questions about H50083 HiRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual H50083 - HiRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H50083 by HiRO.