AM-1500 - Computer Mouse Acteck - Free user manual and instructions

Product Type	Wired Optical Mouse
Model	AM-1500
Brand	Acteck
Dimensions (L x W x H)	120 mm x 60 mm x 35 mm
Weight	100 g
Cable Length	1.5 m
Interface	USB 2.0
Sensor Type	Optical
Resolution	1000 DPI
Number of Buttons	3 (Left, Right, Scroll Wheel)
Scroll Wheel	Yes, with click
Power Source	USB cable (bus-powered)
Compatible Operating Systems	Windows, macOS, Linux
Ergonomic Design	Ambidextrous, contoured
Maintenance	Clean with dry cloth; avoid liquids
Safety Precautions	Do not disassemble; keep away from moisture
Spare Parts Available	Replacement USB cable (if detachable)
Repairability	Limited; non-user-serviceable internal components
Package Contents	Mouse, user manual
Color	Black (typical)

Frequently Asked Questions - AM-1500 Acteck

How do I connect the Acteck AM-1500 mouse?

Plug the USB cable into an available USB port on your computer. The mouse should be automatically recognized and ready to use without additional drivers.

Does the AM-1500 work with Mac?

Yes, the AM-1500 is compatible with macOS as well as Windows and Linux. It uses standard USB HID protocol.

What is the DPI of this mouse?

The Acteck AM-1500 features an optical sensor with a fixed resolution of 1000 DPI, suitable for everyday tasks.

How do I clean the mouse?

Unplug the mouse and wipe the exterior with a soft, dry cloth. Do not use water or cleaning solvents. For the sensor, gently blow away dust.

The cursor is not moving smoothly. What should I do?

Ensure the sensor is clean and the mouse is on a non-reflective surface. Try using a mouse pad. Also check the USB connection.

Is the AM-1500 mouse left-handed friendly?

Yes, the symmetrical design makes it suitable for both left- and right-handed users.

Can I replace the cable if damaged?

The cable is integrated and not user-replaceable. If damaged, consider contacting Acteck support or purchasing a new mouse.

How long is the cable?

The USB cable length is approximately 1.5 meters (4.9 feet).

Does it require batteries?

No, the mouse is powered directly via the USB cable, so no batteries are needed.

What is the warranty period?

Warranty details vary by region. Please check the documentation provided with your purchase or contact Acteck directly.

USER MANUAL AM-1500 Acteck

Line drawing of a computer mouse with bidirectional arrows indicating motion (no text or symbols)

Federal Communication Commission Interference Statement

Keep this installation guide for future reference! It contains Important troubleshooting Information.

Keep your old PS/2 or USB mouse as back-up devices.

WELCOME

Thanks for the acquirement of this new Optical Mouse Acteck

Package Contains

Your ÂM-1500 Mouse package includes the following:

1 Wired Mouse
1 Driver CD
1 User Manual

Note: If any part is missing, please contact your dealer for a replacement immediately.

SAFETY NOTICE

1. Your product complies with FCC and CE rules.
2. This product has no serviceable parts.
3. Use of controls or adjustments of procedures other than the user guide may result in dangerous.

USER RECOMMENDATIONS

The optical mouse can not work on a glass or on a mirror. Avoid operating this mouse on a red surface; otherwise, this mouse may not operate normally, in that case use a mousepad.

A very dark surface will cause higher power consumption.

CAUTION:

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment

ERGONOMIC INFORMATION

Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional.

To reduce the risk of injury, follow these caution:

Take frequent breaks, get up and walk around several times every hour. Vary your tasks throughout the day.

Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach.

Adjust your chair and keyboard so your upper arms and wrists are straight.

Avoid resting your wrists on sharp edges.

USING YOUR MOUSE

For USB port installation

Windows 98 (or higher) is required for USB port installation. Connect the receiver cable to the USB port on the computer. For Windows, you may need to insert the Windows software CD. Insert the divers' CD into the computer's CD-ROM driver when asked to do so.

Install the Mouse

The mouse is connected to your computer via a cable. It needs to plug in your computer by a USB port or a mouse port.

Connect the mouse with computer.

1. Turn off your computer
2. Disconnect the current mouse
3. Plug the USB connector into USB port (computer).
4. Turn the computer on

a) USB is a PnP device; you can plug the device no matter the computer is on or off. Of course, you can remove USB device in the same way.

1. Move the mouse around to test if it was successful.

How to use the wheel

Your mouse has a wheel that functions both as a wheel for Windows scrolling and also as a customized button. It can be used as a standard mouse button, click (press down) the wheel. To Use the Middle Button, Directly Press down the Wheel. For scrolling the screen, simply move the wheel.

Line drawing of a computer mouse with bidirectional arrows indicating motion (no text or symbols)

TROUBLESHOOTING

Mouse Troubleshooting

A. Mouse not detected:

When using the mouse, it may not be detected by the computer. To remedy this problem try the following:

1) Make sure the mouse is plugged into the right mouse port or USB port.

2) Make sure your mouse port has the proper configuration. Refer to your computer documentation for the correct port configuration.

B. Mouse does not work upon installation.

Try one or more of the following:

1) Make sure you have installed the Driver correctly.
2) Make sure the mouse cabe is plugged into the right mouse port or USB port.
3) Unplug the mouse and then plug in the receiver again. Make sure that it had been detected by the Operating Systems properly.
4) Make sure your mouse port has the proper configuration. Refer to your computer documentation for the correct port configuration.

We need know about you. Send your suggestions [e-mail]

If you have any question about our products, please visit our web site.

www.acteck.com

GENERAL FEATURES

• Ergonomic Design
• Cable Length 1.5m
• Super Grip Coating
• Plug and Play, no driver required
• 5 Programmable buttons with optional driver
• Optical Tracking Engine
• 800 dpi resolution
• 5 Buttons + Scroll Wheel
• Dimensions 120 mm x 69 mm x 40 mm
• USB Interface
• Operation Temperature 41\~104 °F
• Operation Humidity 20 90%
• Compatible with Windows98/98SE/ME/2000/XP
• Compatible with Macintosh 8.6 or superior

Federal Communication Commission Interference Statement

This equipment has been tested and found to with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE - Type acceptance: EN300 328 FHSS Device

SYSTEM REQUIREMENT

Mouse compatible with standard Microsoft OS 3rd button and wheel function require Win98/ME/2000/XP. If your computer's operating system is Windows 98/98SE, please prepare the Windows98 or 98SE compact disk for system's request during the installation of mouse