HD120 - Hair Dryer Acme Made - Free user manual and instructions

Product Type	Hair Dryer
Brand	Acme Made
Model	HD120
Power	1800-2000 W
Voltage	110-240 V (dual voltage)
Frequency	50/60 Hz
Dimensions (approx.)	20 x 8 x 8 cm
Weight (approx.)	0.6 kg
Airflow Speeds	2 (high/low)
Heat Settings	3 (high/medium/low)
Cool Shot Button	Yes
Included Accessories	Concentrator nozzle, diffuser (may vary)
Filter Type	Removable rear filter
Hanging Loop	Yes
Power Cord Length	1.8 m
Safety Features	Overheat protection, automatic shut-off
Maintenance	Clean filter regularly; wipe body with damp cloth
Warranty	1 year limited

Frequently Asked Questions - HD120 Acme Made

How do I clean the filter of the Acme Made HD120 hair dryer?

Unplug the dryer and remove the rear filter cover. Use a soft brush or cloth to gently remove dust. Do not use water near the filter. Reattach the cover securely.

Can I use the HD120 with different voltage systems?

Yes, the HD120 is dual voltage (110-240 V) and works worldwide with a suitable adapter plug.

How do I use the diffuser attachment?

Attach the diffuser to the nozzle while the dryer is off. Use low heat and low speed for curly hair, scrunching hair into the diffuser.

What should I do if the hair dryer stops working during use?

The dryer has overheat protection. Unplug it and let it cool for 15 minutes before reusing. Check if the filter is blocked.

Is the Acme Made HD120 suitable for travel?

Yes, its compact size and dual voltage make it travel-friendly. It also has a hanging loop for storage.

How do I activate the cool shot function?

During use, press and hold the cool shot button (usually marked with a snowflake icon) to release a burst of cold air to set your style.

What is the warranty period for this hair dryer?

The Acme Made HD120 typically comes with a 1-year limited warranty. Check your manual for details.

Can I replace the power cord if it gets damaged?

No, the power cord is not user-replaceable. Contact Acme Made or a qualified technician for repairs.

Does the HD120 come with a storage bag?

Some versions may include a storage bag, but it is not standard. Check the package contents.

How often should I clean the filter?

Clean the filter every 2-4 weeks depending on usage. A clogged filter reduces performance and may trigger overheat protection.

USER MANUAL HD120 Acme Made

Model: HD120

hair dryer

www.acme.eu

acme®

4 GB User's manual 48 Warranty card

8 LT Vartotojo gidas 49 Garantinis lapas

Congratulations on your choice to purchase Acme hair dryer! This product has been designed to meet all your personal hair drying and styling needs.

For your convenience record the complete model number and the date you received the product together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.

NOTE: The rating of this product (as marked on the product and product package) is based on specific loading tests. Normal use or the use of other recommended attachments may draw significantly less power.

User maintenance instruction

This hair dryer does not need any maintenance, i.e. replacement of parts or lubrication. Keep this appliance clean for proper operation. Never block or clog air intakes, otherwise overheating will be happen. The appliance has no user serviceable parts; any other servicing should be performed by an authorized service representative or a professional center. Never allow the supply cord to be twisted, pulled, bent, or wrapped around the dryer. If the cord is twisted, untwist the cord before use. When not in use, this appliance should be stored in a safe, dry location, out of reach of children.

Important safety instructions

When using electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER.

DANGER – As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of death by electrical shock:

1. Always "unplug it" immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, "unplug it" immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or invalids.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working property, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
6. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
7. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air inlets.
15. For additional protection the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

Electromagnetic compatibility (EMC): the Acme appliance complies with all standards regarding electromagnetic fields.

General description

A - Concentrator
B - Air inlets
C - Hanging loop
D - Temperature switch

Using the appliance

Drying

1. Make sure the air flow switch is in the "0" position.
2. Put the plug into wall socket.

3. Select the desired temperature switch to cool, warm or hot setting.

4. The cool setting “*” allows you to dry hair that is almost dry and helps to seal in shine.

5. The warm setting "1" is especially suitable for drying dump hair until it almost dries.
   • The hot setting "2" which let you to dry wet hair very quickly.

6. Dry your hair by making brushing movements with the hairdryer at a small distance from your hair.

7. Set the airflow switch position to "0" after drying and unplug. Allow the hair dryer to cool for 10 to 15 minutes before storing it.

Concentrator

With dryer concentrator, you can direct the airflow straight at the brush or comb with which you are styling your hair.

• Pre-dry your hair with the hairdryer on the highest heat setting. For drying, separate your hair into 5-cm wide sections. Place a large round brush at the root of one of the sections.
• Point the hair dryer with the concentrator at a 90-degree angle to the section and run the brush under it, beginning at the roots and working down to the tips. Your hair dryer should now be set at medium. Repeat the process several times to dry the section completely before moving on to the next section.
  • Finish by turning the ends under.

Cleaning

1. Unplug the appliance before clean it.
2. Remove the attachments from the appliance before you clean them.
3. Clean the appliance with dry cloth.
4. Clean the attachments with wet cloth or wash it with water.
5. Wait until dry before you use or store them.

Troubleshooting

My dryer doesn't work

• Check the socket to which dryer is connected. It is possible that socket is dead. Try to connect another appliance to this socket to find out.
• If the dryer automatically switched itself off in drying process it may have overheated. Unplug the dryer from power socket and let it cool down for a few minutes. Clean the holes and the grilles of the dryer if it's blocked by hair or something like that and try to switch on appliance again.
• The power cord of the dryer can by damaged. Unplug the dryer from power socket and check it carefully. If it is damaged, you must give it to replace by authorized service.

Waste Electrical and Electronic Equipment (WEEE) Symbol

The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

lžanga

Olulised ohutusjuhised

Warranty card www.acme.eu/warranty

Product Product model
Product purchase date Seller name, address
Failures (date, description, position of the person who accepts the product, first name, last name and signature)

1. Warranty period

Warranty enters into force starting with the day when the buyer acquires the product from the seller. Warranty period is indicated on the package of the product.

2. Warranty conditions

The warranty is valid only by providing an original document of the product acquisition and this warranty sheet, which includes name of the product model, product purchase date, name and address of the seller.

If it is noticed during the warranty period that the product has faults and these faults where not caused by any of the reasons when the warranty is not applied as indicated in the paragraphs below, manufacturer undertakes to replace the product.

The warranty is not applied to regular testing, maintenance and repair or replacement of the parts which are worn out naturally.

The warranty is not applied if damage or failures occurred due to the following reasons:

usage and/or operating the product without following the manual, technical requirements and safety standards as provided by the manufacturer, and additionally, inappropriate warehousing, falling from heights as well as hard strikes.

• Corrosion, mud, water and sand.
- Repair works, modifications or cleaning, which were performed by a service not authorised by the manufacturer.
- Usage of the spare parts, software or consumpt materials which do not apply to the product.
- Accidents or events or any other reasons which depend on the manufacturer, which includes lightning, water, fire, magnetic field and inappropriate ventilation.
- If the product does not meet standards and specifications of a particular country, in which it was not bought. Any attempt to adjust the product in order to meet technical and safety requirements such as those in the other countries withdraws all the rights to the warranty service.

- Inappropriate installation of the product, inappropriate. If no failures are detected in the product, all the expenses in relation to the service are covered by the buyer.

Garantinis lapas www.acme.eu/warranty

LT