WMVE-SR - Wall mount Pelco - Free user manual and instructions

Product Type	Wall Mount
Brand	Pelco
Model	WMVE-SR
Material	Steel
Finish	White
Weight Capacity	15 kg (33 lbs)
Dimensions (H x W x D)	200 x 100 x 100 mm (7.9 x 3.9 x 3.9 in)
Weight	1.5 kg (3.3 lbs)
Mounting Type	Wall mount, fixed
Compatibility	Pelco cameras with standard 1.5" NPT or 4-hole pattern
Installation	Requires drilling, screws and anchors included
Use Location	Indoor / Outdoor (weather-resistant)
Corrosion Resistance	Yes, coated for outdoor use
Included Accessories	Screws, wall anchors, Allen key
Adjustability	Fixed angle, no tilt/swivel
Color	White (RAL 9016)
Manufacturer	Pelco
Warranty	2 years
Application	Security camera installations

Frequently Asked Questions - WMVE-SR Pelco

What is the weight capacity of the Pelco WMVE-SR wall mount?

The Pelco WMVE-SR wall mount has a weight capacity of 15 kg (33 lbs).

Is the WMVE-SR suitable for outdoor use?

Yes, the mount features a weather-resistant coating and is suitable for both indoor and outdoor installations.

What type of cameras are compatible with this wall mount?

It is compatible with Pelco cameras that use a standard 1.5" NPT thread or a 4-hole mounting pattern. Check your camera's specifications.

Does the mount come with installation hardware?

Yes, the package includes screws, wall anchors, and an Allen key for mounting.

What are the dimensions of the Pelco WMVE-SR?

The dimensions are 200 mm x 100 mm x 100 mm (7.9 x 3.9 x 3.9 inches).

Can I use this mount with non-Pelco cameras?

It may work with other brands if they have the same mounting pattern or thread, but compatibility is not guaranteed.

Is the mount adjustable for tilt or swivel?

No, the WMVE-SR is a fixed wall mount with no tilt or swivel adjustment.

What tools are needed for installation?

You will need a drill, screwdriver, and a level for proper installation. The mount includes basic hardware.

What is the warranty period for this wall mount?

Pelco offers a 2-year warranty against manufacturing defects.

How do I clean and maintain the mount?

Use a soft, damp cloth with mild soap to clean. Avoid abrasive cleaners. Periodically check screws for tightness.

USER MANUAL WMVE-SR Pelco

WMVE-SR/WMVE-WT Rugged Environmental Wall Mounts

White plastic mechanical bracket with mounting holes and a flat base (no text or symbols visible)

C2253M (1/11)

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Installation should be done only by qualified personnel and conform to all local codes.
7. Use only installation methods and materials capable of supporting four times the maximum specified load.
8. Only use replacement parts recommended by Pelco.

The WMVE-SR and WMVE-WT are environmental wall mounts that can be installed directly to a wall or any vertical surface. Power and video wiring can be easily routed through the back of the mounts or through the conduit access located on the bottom of the mount arms. The wall mounts can also be pole mounted using a PA101 pole mount adapter.

MODELS

WMVE-SR Light gray wall mount specifically designed for use with the IM-VEPM, IE-P, and Camclosure® 2 Series pendant mount adapters.

WMVE-WT White wall mount specifically designed for use with the ID-P pendant mount adapter.

PARTS LIST

The following installation tools and parts are supplied:

Qty Description

1 WMVE-SR/WMVE-WT wall mount
1 Tube of anti-seize lubricant
1 Installation manual

USER SUPPLIED PARTS LIST

Qty Description

1 Pendant mount adapter
1 Wrench, 5/64-inch, hex Allen
2 to 4 Fasteners, 1/4-inch, of appropriate type based on installation

STANDARD INSTALLATION

1. Using the wall mount as a template, mark the fastener positions on the mounting surface.
2. Prepare the mounting surface.
3. Route the system power and video wiring through the wall mount.
4. Use a minimum of two 1/4-inch fasteners of appropriate type (not supplied) to secure the wall mount to the mounting surface.

NOTE: (Outdoor installations only) Seal the fastener holes with an appropriate sealant (not supplied) to prevent water damage. Be sure to apply the sealant between the mount and the mounting surface.

Technical line drawing of a mechanical device with multiple ports and a central hub (no text or symbols)

Figure 1. Installing the Wall Mount

1. Attach the pendant mount adapter (not supplied) to the wall mount:

a. Route the wiring through the pendant mount adapter.
b. Apply anti-seize lubricant (supplied) to the threads of the pendant mount adapter.
c. Screw the pendant mount adapter onto the mount arm.
d. Use a 5/64-inch hex Allen wrench (not supplied) to tighten the setscrew located on the front of the wall mount.

Diagram of a handheld device with a circular base and internal components, showing rotational flow arrows (no text or symbols)

Figure 2. Installing the Pendant Mount Adapter

1. To complete the installation, refer to the manual supplied with the pendant mount adapter.

CONDUIT INSTALLATION

1. Using the wall mount as a template, mark the fastener positions on the mounting surface.
2. Prepare the mounting surface.
3. Remove the conduit cover from the bottom of the mount arm.
4. Route the wiring/cabling through the mount arm.
5. Thread a 3/4-inch conduit fitting (not supplied) into the conduit hole located at the bottom of the mount arm.
6. Use a minimum of two 1/4-inch fasteners of appropriate type (not supplied) to secure the wall mount to the mounting surface (refer to Figure 1 on page 4).

NOTE: (Outdoor installations only) Seal the fastener holes with an appropriate sealant (not supplied) to prevent water damage. Be sure to apply the sealant between the mount and the mounting surface.

1. Attach the pendant mount adapter (not supplied) to the wall mount:

a. Route the wiring through the pendant mount adapter.
b. Apply anti-seize lubricant (supplied) to the threads of the pendant mount adapter.
c. Screw the pendant mount adapter onto the mount arm (refer to Figure 2 on page 4).
d. Use a 5/64-inch hex Allen wrench (not supplied) to tighten the setscrew located on the front of the wall mount.

1. To complete the installation, refer to the manual supplied with the pendant mount adapter.

MODELS

WMVE-SR Environmental wall mount; for use with IM-VEPM, IE-P, and Camclosure® 2 Series pendant mount adapters.

WMVE-WT Environmental wall mount; for use with ID-P pendant mount adapter.

MECHANICAL

Mounting Method Secure with 1/4-inch fasteners of appropriate type (not supplied); up to 4 fasteners can be used.

Cable Entry Through the back of the mount and one 3/4-inch conduit access on the bottom of the mount.

GENERAL

Construction

Aluminum

Finish

WMVE-SR Light gray polyester powder coat

WMVE-WT White polyester powder coat

Unit Weight 0.43 kg (0.95 lb)

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

REVISION HISTORY

Manual # Date Comments

C2253M 1/11 Original version.

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice. ©Copyright 2011, Pelco, Inc. All rights reserved.

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

- Five years:

– Fiber optic products
– Unshielded Twisted Pair (UTP) transmission products
- CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models

- Three years:

• Pelco-designed fixed network cameras and network dome cameras with Sarix ^TM technology.
• Pelco-branded fixed camera models (CCC1390H Series, C10DN Series, C10CH Series, and IP3701H Series)
  – EH1500 Series enclosures
  – Spectra ^ IV products (including Spectra IV IP)
  – Camclosure ^® Series (IS, ICS, IP) integrated camera systems
• DX Series digital video recorders (except DX9000 Series which is covered for a period of one year), DVR5100 Series digital video recorders, Digital Sentry® Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders
• Endura ^10 Series distributed network-based video products
• Genex ^® Series products (multiplexers, server, and keyboard)
• PMCL200/300/400 Series LCD monitors
• PMCL5xx Series FHD monitors

- Two years:

• Standard varifocal, fixed focal, and motorized zoom lenses.
  – DF5/DF8 Series fixed dome products
  – Legacy ^® Series integrated positioning systems
  – Spectra III ^™ , Spectra Mini, Spectra Mini IP, Esprit ^® , ExSite ^® , and PS20 scanners, including when used in continuous motion applications.
  – Esprit Ti and TI2500 Series thermal imaging products
• Esprit and WW5700 Series window wiper (excluding wiper blades).
• CM6700/CM6800/CM9700 Series matrix
• Digital Light Processing (DLP ^® ) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty.

-Intelli-M®elDC controllers

• One year
  – Video cassette recorders (VCRs), except video heads. Video heads will be covered for a period of six months.
• Six months:

— All pan and tilts, scanners, or preset lenses used in continuous motion applications (preset scan, tour, and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at [phone] or [phone] to obtain a Repair Authorization number (RA), and provide the following information:

1. Model and serial number
2. Date of shipment, P.O. number, sales order number, or Pelco invoice number
3. Details of the defect or problem

If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

To expedite parts returned for repair or credit, please call Pelco at [phone] or [phone] to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair) and designated return location.

All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.

2-10-10

Green The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

by Schneider Electric

www.pelco.com