325D - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free 325D PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Measuring Instrument (Multimeter) |
| Brand | PCE Instruments |
| Model | 325D |
| Dimensions (approx.) | 150 x 70 x 30 mm |
| Weight (approx.) | 200 g (including battery) |
| Power Supply | 2 x 1.5V AAA batteries |
| Display | LCD, 4-digit, with backlight |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 200 V to 600 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Capacitance Measurement | 2 nF to 200 µF |
| Frequency Measurement | Up to 20 kHz |
| Diode Test | Yes |
| Continuity Test | Yes (audible beeper) |
| Data Hold | Yes |
| Over Range Indication | Yes ("OL") |
| Low Battery Indication | Yes |
| Auto Power Off | Yes (after approx. 15 min) |
| Safety Rating | CAT II 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Accessories Included | Test leads, battery, manual |
| Warranty | 2 years |
| Cleaning | Wipe with dry cloth; do not use solvents |
Frequently Asked Questions - 325D PCE Instruments
How do I measure DC voltage with the PCE Instruments 325D?
Turn the dial to the DC voltage range (V⎓). Connect the black lead to COM and red lead to V/Ω/Hz. Touch probes to the circuit and read the display. Ensure you start with the highest range if unknown.
What does 'OL' on the display mean?
'OL' stands for Over Load or Over Range. It indicates that the measured value exceeds the selected range. Switch to a higher range to get a reading.
How do I replace the battery in the 325D?
Remove the screw on the back cover and open the battery compartment. Replace the two AAA batteries, ensuring correct polarity. Close and screw the cover back.
Can I measure AC current with this multimeter?
Yes, the 325D can measure AC current up to 10A. Turn the dial to the AC current range (A~). Use the 10A socket for currents above 200mA, otherwise use the COM and V/Ω/Hz socket.
How do I perform a continuity test?
Turn the dial to the continuity/beep symbol (often a diode with sound waves). Connect the probes to the circuit. A continuous beep indicates a closed circuit (resistance <50Ω).
What is the auto power off feature?
The meter automatically turns off after approximately 15 minutes of inactivity to preserve battery life. To restart, turn the dial off and back on.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press again to release. This is useful for capturing readings in difficult positions.
What safety precautions should I take?
Always select the correct range and function. Do not measure voltage above 600V. Use proper test leads and inspect them for damage. Disconnect power before measuring resistance. Follow the safety instructions in the manual.
How do I measure capacitance?
Turn the dial to the capacitance range (F). Discharge the capacitor fully. Insert the capacitor into the dedicated socket (if available) or use probes. Read the value on the display.
Can I measure frequency with the 325D?
Yes. Turn the dial to the Hz position. Connect the probes to the signal source. The frequency will be displayed. The maximum frequency is 20 kHz.
User questions about 325D PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual 325D - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 325D by PCE Instruments.