AXSUB-GM1 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXSUB-GM1 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer Amplifier |
| Brand | AXESS |
| Model | AXSUB-GM1 |
| Amplifier Class | Class D |
| RMS Power @ 4 Ohms | 300 Watts x 1 Channel |
| RMS Power @ 2 Ohms | 500 Watts x 1 Channel |
| RMS Power @ 1 Ohm | 800 Watts x 1 Channel |
| Frequency Response | 20 Hz - 250 Hz |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.5% |
| Crossover Type | Low-Pass, Variable |
| Low-Pass Filter | 50 Hz - 250 Hz |
| Subsonic Filter | 15 Hz - 40 Hz |
| Bass Boost | 0-12 dB @ 45 Hz |
| Input Sensitivity | 200 mV - 6 V |
| Dimensions (W x H x L) | 7.9" x 2.0" x 10.2" |
| Weight | 5.5 lbs (2.5 kg) |
| Recommended Fuse Rating | 60A (AGU or ANL) |
| Recommended Power/Ground Wire | 4 AWG |
| Impedance Stability | 1 Ohm stable |
| Protection Circuits | Short circuit, thermal, over-voltage |
| Color | Black (Heatsink) with silver accents |
| Mounting Type | Vertical or horizontal with included brackets |
| Cooling | Convection with finned heatsink |
| Warranty | 1 Year Limited |
Frequently Asked Questions - AXSUB-GM1 AXESS
What amplifier class is the AXSUB-GM1?
The AXSUB-GM1 is a Class D monoblock amplifier, known for high efficiency and compact size.
What is the RMS power output?
RMS power varies by impedance: 300W @ 4 ohms, 500W @ 2 ohms, and 800W @ 1 ohm.
What size wire should I use for power and ground?
AXESS recommends at least 4 AWG power and ground wire, with a 60A fuse (AGU or ANL type).
Can I bridge this amplifier?
No, the AXSUB-GM1 is a monoblock amplifier designed for a single subwoofer channel and cannot be bridged.
What impedance load is this amp stable to?
It is 1 ohm stable, allowing you to wire multiple subwoofers or use a DVC sub for maximum power.
Does it have a low-pass filter and subsonic filter?
Yes, it features a variable low-pass filter (50-250 Hz) and a subsonic filter (15-40 Hz) to protect your subwoofer.
What is the recommended fuse rating?
A 60A fuse (AGU or ANL style) is recommended for the main power wire.
What are the dimensions of the AXSUB-GM1?
The amplifier measures approximately 7.9" (W) x 2.0" (H) x 10.2" (L) and weighs 5.5 lbs.
Does it come with a remote bass knob?
The AXSUB-GM1 includes a wired remote bass level control that can be mounted for easy adjustments.
What protection features does it have?
It includes protection against short circuits, thermal overload, and over/under voltage to safeguard your system.
User questions about AXSUB-GM1 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXSUB-GM1 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXSUB-GM1 by AXESS.