KL1039A - Glue gun Clas Ohlson - Free user manual and instructions

Product Type	Glue gun
Brand	Clas Ohlson
Model	KL1039A
Power Supply	230 V AC, 50 Hz
Power Consumption	12 W (standby) / 70 W (operating)
Protection Class	II (double insulated)
Warm-up Time	5–7 minutes
Glue Stick Diameter	7 mm
Glue Stick Length	100 mm
Weight	130 g
Nozzle Temperature	Up to 200 °C
Application	Wood, paper, cardboard, certain plastic materials
Included Accessories	2 glue sticks (Ø7 × 100 mm)
Safety Features	Double insulation, RCD recommended for outdoor use
Stand	Integrated stand for upright placement
Trigger	Yes, for controlled glue flow
Mains Lead	Yes, with plug
Cleaning	Unplug, wipe with lightly moistened cloth, use mild cleaning agents
Disposal	Do not dispose with household waste; recycle at local facility

Frequently Asked Questions - KL1039A Clas Ohlson

How to use the glue gun?

Preparation: Ensure work area is clean and well lit. Clean contact surfaces (dry, dust-free, grease-free). Plug the glue gun into a 230 V outlet and rest it on its stand for 5–7 minutes to heat up. Gluing: Insert a glue stick into the rear hole, squeeze the trigger a few times to engage the feed mechanism. Gently squeeze the trigger to apply molten adhesive. Press surfaces together and hold for 15 seconds. Unplug after use and let it cool on the stand.

What glue sticks are compatible?

Only use glue sticks specifically designed for this product. The required dimensions are diameter 7 mm and length 100 mm. Using incompatible sticks may damage the glue gun.

How long does it take to heat up?

The warm-up time is approximately 5–7 minutes. The nozzle and molten adhesive can reach temperatures up to 200 °C, so handle with care.

Can I use it for plastic?

Yes, this glue gun is suitable for certain plastic materials, as well as wood, paper, and cardboard. Always test on a small area first to ensure compatibility.

How to clean the glue gun?

Before cleaning, unplug the product and allow it to cool completely. Use a lightly moistened cloth with a mild cleaning agent. Never use solvents or corrosive chemicals.

Is it safe to leave the glue gun unattended?

No. Do not leave the product unsupervised when it is connected to an electrical socket. Always unplug it after use and let it cool completely before storing.

What should I do if glue gets on my skin?

Both the glue and nozzle are very hot. Rinse any burn with cold water and keep it under running water for some time. Seek medical attention if necessary.

Can I remove the glue stick while the gun is hot?

Do not attempt to remove the glue stick from the glue gun while hot. Doing so can result in personal injury and/or damage to the product.

What is the maximum temperature of the glue gun?

The nozzle and molten adhesive can reach temperatures up to 200 °C. Always avoid skin contact and use respiratory protection if needed.

How to dispose of the glue gun?

This product should not be disposed of with general household waste. According to EU regulations, it must be recycled responsibly. Take it to your local collection facility or contact the place of purchase.

USER MANUAL KL1039A Clas Ohlson

Art.no

18-3625

18-3625-1

41-1350

41-1350-1

Model

KL1039A-UK

KL1039A-UK

KL1039A

KL1039A

Ver. 20170616

Glue Gun

Art.no 18-3625, 18-3625-1 Model KL1039A-UK

41-1350, 41-1350-1 KL1039A

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services (see address details on the back).

Safety

Symbol guide

Class II product. Double-insulated.

Warning for a possible hazard which could lead to serious personal injury and/or damage to the product if the stated instructions are not followed.

Warning for an electrical shock hazard.

Unplug the product immediately if the mains lead has been damaged or when inspecting it.

Use respiratory protection.

General safety instructions

• This product must not be used by anyone (including children) suffering from physical or mental impairment. This product should not be used by anyone that has not read the instruction manual unless they have been instructed in its use by someone who will take responsibility for their safety. Never let children play with the product.
• Keep children away from the packaging materials. Choking hazard.
• The product should not be used if it is in any way damaged or malfunctioning.
• Never attempt to modify the product in any way.
• Any repairs should only be carried out by qualified service technicians.

Electrical safety

Warning for an electrical shock hazard.

• Do not use the product if it is missing parts or if its housing has been damaged in any way.
• Do not place the product where there is a risk of it falling into water or other types of liquid.
• The product should only be connected to a 230 V, 50 Hz electrical outlet.
• Outdoor use of the product requires that any wall socket used be equipped with a max 30 mA RCD. Check the RCD before each use. Use of an RCD reduces the risk of electric shock.
• The mains lead should be checked regularly. Never use the product if the mains lead or plug is damaged.
• If the mains lead has been damaged, it must only be replaced by the manufacturer, authorised service facility or qualified tradesman. This is to prevent the risk of electric shock or fire.
• Never touch the mains plug if your hands are moist or wet.
  • Always grip the plug when unplugging the product, never pull the mains lead.
• Never carry or hang the product by its mains lead.

Product specific safety instructions

• Place the product in a standing position after use and let it cool sufficiently before putting it away for storage.
• Do not leave the product unsupervised when it is connected to an electrical socket.
• Never cover the product when it is connected to an electrical socket.
• Never expose the product to rain or moisture.
• Always disconnect the mains lead from the wall socket when you have finished work or when the product is not being used.
• Unplug the product and let it cool completely before putting it away for storage.
• Both the glue and nozzle become very hot during use. This can cause burn injuries. Rinse any burn with cold water and keep it under running water for some time.
• Only use glue sticks specifically designed for this product.
  • Always place the product on its stand when it is not in use.

Product description

Contents

• 1 × glue gun
• 2 × glue sticks, ∅ 7 × 100 mm

Application

This glue gun can be used for gluing wood, paper, cardboard and certain plastic materials.

Glue gun

1. Nozzle
2. Glue stick hole
3. Glue stick
4. Handle
5. Mains lead
6. Trigger
7. Stand

Instructions for use

Preparations

• Keep the work area clean and well lit.
• Clean the contact surfaces. The surfaces should be dry and clear of dust or grease. Smooth surfaces should be roughed before gluing.
• Plug the glue gun into an electrical socket and rest it on its stand (7) for 5–7 minutes to let it reach operating temperature.

Gluing

Use respiratory protection.

Warning: Burn hazard. The molten adhesive and nozzle reach temperatures of up to 200 °C. Avoid all skin contact with the nozzle (1) and molten adhesive whilst working.

1. Grip the glue gun by the handle (4) and insert a glue stick (3) into the hole (2) at the rear of the gun.
2. Squeeze the trigger (6) a few times until the feed mechanism has gripped the glue stick.
3. Gently squeeze the trigger to apply molten adhesive to the surfaces to be glued together.
4. Release the trigger and squeeze it again if the trigger was squeezed all the way in before you had finished applying glue to the contact surfaces.
5. Release the trigger when the surfaces have been coated with glue.
6. Immediately press the surfaces together and hold them in position for 15 seconds.
7. Let any excess glue cool and remove it with a sharp knife.
8. Unplug the glue gun from the wall socket to switch the gun off.
9. Rest the glue gun on its stand to cool completely before putting it away.

Warning: Do not attempt to remove the glue stick from the glue gun. Doing so can result in personal injury and/or damage the product.

Care and maintenance

• Always unplug the product from the wall socket before cleaning.
- Clean the product using a lightly moistened cloth. Use only mild cleaning agents, never solvents or corrosive chemicals.

Responsible disposal

This symbol indicates that this product should not be disposed of with general household waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

Specifications

Power supply 230 V AC, 50 Hz

Power 12 (70) W

Protection class ||

Warm-up time 5–7 min

Glue sticks ∅ 7 × 100 mm

Weight 130 g

Limpistol

Art.nr 18-3625, 18-3625-1 Modell KL1039A-UK

41-1350, 41-1350-1 KL1039A

Specifikationer

41-1350, 41-1350-1 KL1039A

Spesifikasjoner

41-1350, 41-1350-1 KL1039A

Tekniset tiedot

41-1350, 41-1350-1 KL1039A

Technische Daten

Postal 10 – 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

Deutschland

Kundenservice Hotline: [phone]

E-Mail: [e-mail]

Homepage

www.clasohlson.de