VTR8010 - Dictaphone PHILIPS - Free user manual and instructions

Product Type	Digital Voice Recorder
Brand	Philips
Model	VTR8010
Dimensions	100 x 30 x 12 mm (approximate)
Weight	50 g (approximate)
Power Source	2 AAA batteries or USB-C rechargeable (estimate)
Recording Format	MP3 or WAV (typical)
Recording Time	Up to 50 hours (estimate)
Playback	Built-in speaker and headphone jack
Display	LCD screen with backlight
Memory	Internal flash memory (4 GB typical)
Connectivity	USB 2.0 for file transfer
Microphone	Built-in condenser microphone
Additional Functions	Voice activation, noise reduction, variable playback speed
Maintenance	Clean with a soft, dry cloth
Safety	Keep away from water and extreme temperatures
Spare Parts / Repairability	Battery replacement possible; contact Philips support
Guide Language	English (PDF available)

Frequently Asked Questions - VTR8010 PHILIPS

How do I turn on the Philips VTR8010?

Slide the power switch to the ON position. The device will boot and display the main menu.

How do I start recording?

Press the REC button. The red LED will light up. Press again to pause, or press STOP to save.

How do I transfer files to my computer?

Connect the VTR8010 to your computer using the USB cable. It will appear as an external drive. Copy the audio files to your PC.

What batteries does the VTR8010 use?

It uses 2 AAA batteries (alkaline or rechargeable). Insert them with correct polarity.

Can I use a USB charger?

Yes, if you use rechargeable AAA batteries, you can charge them via the USB port when the device is off (if equipped).

How do I delete a recording?

Navigate to the file in the playback menu, then press the DELETE button or select Delete from the options.

The device is not turning on. What should I do?

Check the batteries. Ensure they are inserted correctly and have power. Replace if needed. Also check the power switch.

How do I set the date and time?

Go to Settings > Date/Time. Use the navigation buttons to adjust and confirm with OK.

Is the VTR8010 waterproof?

No, it is not waterproof. Keep it away from liquids and moisture to avoid damage.

Can I use an SD card for extra storage?

The VTR8010 typically has internal memory only. Check the manual if a microSD slot is available (not standard).

USER MANUAL VTR8010 PHILIPS

Register your product and get support at www.philips.com/welcome

[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
|
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic or background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.
[NO TEXT]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[NO TEXT]
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic or background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.
|
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
|
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background (like ruled paper), the OCR result must ignore them. The provided OCR content is "____", which consists of four underscores. This is incorrect because underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line violates the rule and constitutes an error. Therefore, the OCR result is inconsistent with the Ground Truth.
[EMPTY]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
(No text)
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background (like ruled paper), the OCR result must ignore them. The line in the GT is clearly a stylistic or background line, not a placeholder for text. Therefore, the OCR should not have output any underscores. Outputting `____` constitutes an error under Rule 2, as it hallucinates placeholder symbols where none are semantically intended. Hence, the OCR result is inconsistent with the Ground Truth.
|
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]

目录

使用外置麦克风录音

1、音乐文件夹

2、当前文件名

3、当前播放时间

4、当前文件总时间

5、音效

6、TF 卡存储器

7、电量指示

8、频谱

9、A-B 复读

10、当前文件数 / 文件总数

11、播放模式

www.philips.com/support

无法启动录音笔：

电池电量已耗尽请及时充电。

录音笔无法录音：

I Welcome 37 Safety 38 Hearing safety 38

3 Your Voice Tracer digital recorder 39 What's in the box? 39 Overview 39

4 Start To Use 41 Power On/Off 41 Recharge 42 Key Lock (HOLD Function) 43 PC Connection 43

5 Voice Recording 45 Recording Interface Reference: 45 Illustration of Recording Interface: 45 Use an External Microphone to record 47

6 Video Recording 48 7 Voice Mode

Voice Playback Interface Specification: 49
Audio Playback 49
(1)Play mode 50
(2)AB Replay 50
(3)Replay Times 50
(4)Replay interval 51
(5)Variable speed 51
(6)Scan speed 51
(7)Details 52
Delete Files 52

8 Music Mode 53 Music playback Interface illustration 53 (1)EQ Mode 54 (2)Play mode 54 (3)Display Mode 54 (4)AB Replay 55 (5)Replay times 55 (6)Replay interval 56 (7)Variable Speed 56 (8)Scan speed 56 (9)Details 56 Delete Files 57

9 Video Mode 58
(1)Play mode 58
(2) Scan speed 58
(3) Details 59

Delete Files 59

10 Radio Mode 60

II Setting Mode 61

(I)Select Memory 61

(2)Select Folder 61

(3)Record Type 62

Telephone Record 62

Line in Record: 62

(4)Voice-activated Recording 63

(5)The Listen In function 63

(6)Automatic file splitting 63

(7)Backlight Time 63

(8)Auto off 64

(9)System time setting 64

(10)Record timer 65

(11)Language 66

(12)Advanced 66

12 Frequently Asked Questions 67

Cannot switch on the device 67

Cannot record with the device 67

The device cannot play recorded audio 67

13 Technical Parameters 68

Storage 68

Dimensions and Weight 68

System requirement 68

Recording 68

I Welcome

Welcome to the world of Philips! We are honored by your choice and purchase of Philips' products. You can have Philips' comprehensive technical supports from our website, e.g. user's manuals, software downloading and warranty information etc. www.philips.com

Product Features

• One-touch voice recording: Just turn on the recording switch to start recording, turn off to save file.
- One-touch video recording: Long press the video recording switch to start recording, short press the stop button to save the file.
• Record in common MP3 format.
• USB2.0 high speed data access.
• Voice-activated recording.
• USB mass storage, ensuring maximum compatibility.

2 Important

Safety

• To avoid a short circuit, do not expose the product to rain or water.
- Do not expose the device to excessive heat caused by heating equipment or direct sunlight.
- Protect the cables from being pinched, particularly at plugs.

Attention! Before using the device please read this User's Manual carefully. The company shall not be liable for any data loss due to erroneous operation or causes of a force majeure. Special attention should be given to correct operations and files back up.

Hearing safety

Observe the following guidelines when using your headphones:

• Adjust to suitable volume, do not use the earphone for a long time.
• Please remember that do not turn the volume up beyond your tolerance.
• Do not turn up the volume so high that you can't hear

what's around you.

• When in dangerous environment, please carefully use the earphones or stop using.
• Do not use the earphones when driving, cycling, and skateboarding to avoid traffic accident and violating laws and regulations.

3 Your Voice Tracer digital recorder

What's in the box?

Overview

1.Built-in Microphone

2.USB Jack

3.Microphone Jack (Line in)

4.Earphone Jack

5.Power On/Off

6.Play/Pause

7.Record/Play Indicator

8.Previous Track/Fast Backward

9.Display

1. Stop Button, File Folder Switch Button

11.Video Button

12.Volume Up, Menu Selection
13. Next Track/Fast Forward
14.Menu Button
15.Volume Down, Menu Selection
16.Delete
17. Voice Record Button
18.Hold
19.Speaker
20.TF Card Port

4 Start To Use

Power On/Off

Note

- please recharge the device for three hours before using it for the first time!

(1) When the power switch is in OFF position, the device is cut off from power and can't switch on.
(2) When the power switch is slid to "ON", the device starts automatically and then displays "PHILIPS". See the picture as follow:

Then the device displays the stop playing interface. On this interface, press MENU button for 2 or 3 seconds to return to the main interface.

English

The main interface includes five modes. The following five pictures show the modes respectively: Voice, Music, Video, Radio and Setting Mode.

Note

• When not taking voice or video recording, users can press MENU button for 2 or 3 seconds to return to main interface.
• From now on, the device's On/Off is controlled by the PLAY button as follows:
• Switch off: When in the power-on state, press the PLAY button until the "Goodbye" is displayed, and then the device is switched off.
• Switch on: When in the power-off state, press the PLAY button until the startup logo "PHILIPS" is displayed.

Note

• The device has a built-in lithium battery. If the device is idle for a long time, please slide the power switch to the "OFF" position.
• If the device cannot work normally, please make sure the device is not out of power.
• When the device is working, please do not cut off the power, otherwise damaged file or malfunction may occur.
• When the battery indicator “☐” is displayed, please charge the device promptly.
• Do not format memory and card on PC otherwise negative impacts may happen to some fuctions of the device.

Recharge

Note

- please slide the power switch to the position of "On".

(I)Connect the device with PC through USB cable, as follows.

(2) Use the specified charger to charge the device. When using the above methods to recharge, the device will be in the state of recharging. The battery indicator shows a battery icon turning from empty to full repeatedly, indicating that the device is recharging. Under normal circumstance, the device can be fully recharged in around 2 hours. When the device is fully recharged, the battery icon is full and the orange indicator light turns off.

Note

While the device is connected to a computer, it cannot be operated manually.

Key Lock (HOLD Function)

(I)Slide the HOLD switch to lock position to lock all the buttons on the device, except the slide switch of recording. Then "Hold" is displayed for a while and disappears as shown

in the following picture.

English

- To unlock buttons, please slide the "HOLD" switch down to OFF.

PC Connection

The device can be used as a USB mass storage to conveniently store, back up and move files. Link the device to a computer with a USB cable. The voice recorder can automatically be recognized as a mass storage device without the need to install any software, as shown in the following picture.

Note

When moving files into or out of the device, please do not disconnect the device from the computer.

While the device is connected to a computer, it cannot be operated manually.

5 Voice Recording

Before using the device, please read carefully the following instructions.

(1) Slide the record switch to "REC" to start recording; the "Record/Play" indicator flickers red; please place the built-in microphone towards the source of sound.

(2)Press "PLAY" button to pause recording, then the red light flickers, and the display shows "Pause".

(3)Press "PLAY" button again to resume recording.

(4)Slide the record switch to "STOP" to end recording, the device returns to the stopped playing interface of current recorded file.

Recording Interface Reference:

Illustration of Recording Interface:

1、Current Folder

2、Record state

3、Record File name

4、Current Time

5、Remain Time

6、TF Card Memory

7、Battery

8、Voice energy

9、The current file's number

10、Already existing file number

Note

When the low battery icon appears, it means the battery is nearly empty and the system will automatically shut down. If the device is recording, the system will automatically save the recorded file then shut down. If the device has low battery, please recharge promptly. After the device shuts down on low battery, the following icon will display.

Note

• Prior to recording, please preset the record type you need.
• The recorded file can be stored in any of the A, B, C, D folder; each folder can store up to 99 audio files. If one folder is full with 99 files, the system automatically stores the subsequent files in the next folder. In the case that all four folders are full, please delete some unnecessary files to enable recording.
  • Make a test recording to make sure that the Voice Tracer settings are correct.
  • Each folder can store 99 files at most, totally 396 files (99 files x 4 folders).
• If the recording time exceeds the usable storage of the device or the number of files reaches the limit of 396, the recording stops. Please delete part of recording or move it to a computer.
• When recording, please do not cut off power, otherwise loss or damage of recorded file may be resulted.
• If need to record for a long time, please charge the device before recording.
• A fully charged battery will allow you to record for 10 hours.

Use an External Microphone to record

When using an external microphone to record, please at first plug it into the Line in jack, and then record according to the procedures of recording with built-in microphone. After you plug in the external microphone, the built-in microphone is disabled. Please note that the plug of the external microphone must be stereo plug as shown in the picture below.

6 Video Recording

When you use this voice recorder to record video for the first time, please read the contents in this section!

(I)The record video file is stored in the folder named VIDEO, which can maximally store 99 files. If the folder is fully loaded but you need to take another video record, please delete some unnecessary files before recording.
(2)Press Video button 2Sec to start the recording. Record/Play "indicator turns red.
(3)Press Video button to pause the recording. Record/Play "indicator flickers
(4)Press Video button again to continue recording
(5) Short press Stop button to stop recoring and return to the list interface of current record file

Note

- Do not format memory and card on PC. Please proceed the formatting on the device so as to avoid any negative impacts to video record.

7 Voice Mode

On the main interface you can select the voice mode with "or" buttons, and then shortly press the menu button to enter. Please refer to the Voice Stop interface below:

Voice Playback Interface Specification:

I、Current Folder
2、Current File Name

3、Current Time
4、Total Time
5、TF Card Memory
6、Battery
7、A-B Repeat
8、Index
9、Circulation Mode

Audio Playback

(I)In the Stop Mode of recorded file, press STOP button to select the folder you prefer.
(2)Press "◀◀r" to elect a file to play.
(3)Press Play button to start playing, "record / playback" indicator will turn green.
(4)Press "+" and "-" to adjust volume.
(5)Press STOP to stop playing. When the playing is stopped, press down the MENU button for about 2 seconds to return to the main interface.
(6)When playing, press PLAY to pause, press PLAY again to continue playing.
(7) When playing, press "far" for a few seconds to fast forward or backward.

Note

• If the earphone is plugged in, the speaker is disabled.

After the audio file is selected, press the PLAY button shortly to play. When playing, press shortly the MENU button to pop up the following menu list: Play Mode, AB Replay, Replay Times, Replay Interval, Variable Speed, Scan speed, Information. See the below interface reference:

(1)Play mode

As "Play mode" menu is selected, the press the "MENU" button will enter the playback mode selection, you can choose the playback mode you need to reference the interface as shown below:

Sequence: play the file selected directory in order, all played out a times the current directory's documents to be automatic stop playing.

Repeat One: play current music repeatedly.

Repeat Folder: play all files in the selected folder.

Random: randomly play the selected folder.

(2)AB Replay

Choose "AB Replay" from the Playing Modes, then press MENU button to enter AB Replay. For operations of AB Replay please refer to AB Replay section in "Music playback".

(3)Replay Times

Select "Replay Times" option from play menu list, then press Menu button to enter into setting menu of Replay Times. Adjust the times by "◀ or “”. The reference interface is shown as below:

(4)Replay interval

Replay interval means the time interval between two replays. You can select "Replay interval" option in the play menu list, then press Menu button to enter into setting of Replay interval. Adjust the time of Replay interval (time unit: second) by "or " " button. The reference interface is shown as below:

(5)Variable speed

Select "Variable Speed" option in play menu list, then press Menu button to enter into the menu of Variable Speed. Adjust the play speed by "or " " Button. The reference interface is shown as below:

English

Note

• Variable Speed does not support PCM recordings.

(6)Scan speed

Select "Scan Speed" option in play menu list, then press Menu button to enter into the menu of Scan speed. Adjust the Scan speed by "← or " " button. Scan speed means the speed for fast forward or fast backward. The reference interface is shown as below:

(7)Details

Get detailed information of the playing file from this menu, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below:

Delete Files

On the playing music interface, press the DELETE for about 2 seconds, the interface of the following picture will appear. Below are the pictures of the deletion operations:

Press "And " " choose "YES" to confirm deletion, "NO" to keep file; press MENU button to execute.

52 EN

8 Music Mode

From the main interface, you can choose music mode with "or" "tons, and then shortly press the MENU button to enter. Files list interface is as follows:

Then, shortly press the Play button to enter the music playback interface. Music playback interface is as follows:

Note

- music files can only be played when they are in "MUSIC" folder.

Music playback Interface illustration

English

1、Music Folder
2、Current File Name
3、Current Time
4、Total Time
5、EQ
6、TF Card Memory
7、Battery
8、Spectrun
9、A-B Repeat
10、Index
II、Circulation Mode

You can select the music you want to play by pressing and “when press PLAY to play the music. When playing, shortly press the MENU button, the below menu pops up with modes: EQ mode, Play mode, Display mode, AB replay,

Replay times, Replay interval, Variable Speed, Scan speed and Information. See the interface as follows:

EQ Mode

Play Mode

Display Mode

AB Replay

Replay Times

Replay Interval

Variable Speed

Scan Speed

Information

Exit

(1)EQ Mode

From the Playing Menu list, select "EQ Mode", press MENU button to enter. The Equalizer includes: Normal, Pop, Classic, Soft, Jazz, Rock and DBB. Refer the below pictures:

In the EQ Mode, you can choose mode with "+" and "-" buttons, press MENU button to confirm.

(2)Play mode

From the menu list, select "Play Mode", press MENU button to enter. See the interface as follows:

Sequence

Repeat One

Repeat Folder

Random

Sequence: play files sequentially from selected folder. After playing all the files in the current folder, the playing stops automatically.

Repeat one: repeat continuously the selected file.

Repeat Folder: repeat playing files from the selected folder.

Random: randomly play files in selected folder.

(3)Display Mode

Select "Display Mode" option from menu list, then press Menu button to enter into the menu list of display mode. The reference interface is shown as below:

Spectrum: The display screen shows the spectrum of the playing music.

Lyric: The display screen shows lyrics if there lyric file that matches with music files are in the device.

Lyrics synchronized display

The device supports files with "*.lrc" as file extension to realize lyrics synchronized display

Note

1. The lyric file name should be in accordance with music file name.
2. The display screen will shows the lyric if the proper lyric file is available.

(4)AB Replay

From the menu list, select "AB Replay", press MENU button to enter.

Set AB Replay

- Set the start mark When playing, shortly press MENU button to enter Playing Menu, then shortly press "+" or "-" to select "AB Replay" mode, then press MENU button to confirm and return to the state of music playing. The "A" from "A-B" on OLED display turns yellow and the start point is set. If you need to reset the start point A, shortly

press '▶' to make confirmation.

- Set the finish mark After setting mark A, shortly press "→" to set the finish mark and the "B" in "A-B" on OLED display turns yellow as well. When the "A-B" is displayed in yellow on the OLED, the section between mark A and B will be replayed for specified times. After playing specified times, the system resumes normal playing. If AB Replay is not needed, use any of the following methods to cancel the AB Replay mode.

English

Cancellation: Shortly press "PLAY" button to cancel the AB marks and pause playing.

Shortly press "STOP" button to cancel the AB marks and stop playing.

Shortly press "MENU" button to cancel the AB marks and return to normal playing.

(5)Replay times

Select "Replay times" option in play menu list, then press Menu button to enter into setting menu of Replay times.

Adjust the times by “◀ or “”. The reference interface is shown as below:

(6)Replay interval

Replay interval means the time interval between two Replays. You can select "Replay interval" option in the play menu list, then press Menu button to enter into setting of Replay interval. Adjust the time of Replay interval (time unit: second) by "##or " " button. The reference interface is shown as below:

(7)Variable Speed

Select "Variable Speed" option in play menu list, then press

Menu button to enter into the setting menu of Variable Speed. Adjust the play speed by "or " " button. The reference interface is shown as below:

(8)Scan speed

Select "Scan Speed" option in play menu list, then press Menu button to enter into the setting menu of Scan speed. Adjust the Scan speed by "← or " " button. Scan speed means the speed for fast forward or fast backward. The reference interface is shown as below:

(9)Details

Get detailed information of the playing file from this menu, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below:

Delete Files

On the stopped playing interface, press the DELETE button for about 2 seconds, the interface of the following picture will appear. Below are the pictures of the deletion operations:

If the device shows the interface on the left side, press "+" or "-" button to select individual or all files; if the device shows the interface on the right side, press "◀ and " ▶▶" to choose "YES" to confirm deletion, "NO" to keep file; press MENU button to execute.

9 Video Mode

On the main interface, we can select video mode by "or" button, and then press the Menu button to enter into the interface of file list. The interface of file list is shown as below:

Shortly press Play button to enter into the interface of video play. The reference interface of video play is shown as below:

You can select your desired video by "+"or"-" button and press Play button to play it. When playing video, short press Menu button and the following menu list will pop up: play mode, scanning speed and details. The reference interface is shown.

(1)Play mode

When an option is selected, the corresponding area will turn yellow. As the above picture shows, when you select "Play Mode" option and then press Menu button, it will enter into selection menu of play mode. You can select play mode you want. The reference interface is shown as below:

Sequence: Play the selected files of the list in order. It will stop automatically after playing the current file list for one time.

Repeat One: Play the selected file repeatedly.

Repeat Folder: Play the selected files from the selected folder repeatedly.

Random: Play the selected files in the folder randomly.

(2) Scan speed

Select "Scan Speed" option in play menu list, then press Menu button to enter into the setting menu of scanning speed. You

can select the scanning speed by "+" or "-" button and press Menu button for confirmation. The reference interface is shown as below:

(3) Details

The detailed information of the playing file can be found from the menu list, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below:

Delete Files

In the interface of file list, press the Delete button for about

2 seconds, and it will display the following interface. The related reference picture showing deleting steps are as below:

If the device shows the interface on the left side, select "+" or "-" button to choose to delete single file or all files. If the device shows the interface on the left side, select "YES" to confirm deleting or "NO" to retain file by "◀" or "▼" button. Press Menu button to execute the option.

10 Radio Mode

From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode:

frequency mode

user mode

In radio mode, there are "user mode" and "frequency mode" to switch, if some radio channels have been already saved. Short press PLAY button to switch between the two modes; if no radio channels have been saved, there is only "frequency mode" available. In the frequency mode, press "button" "button to choose radio frequency, press MENU button to display: Save Channel, Auto Search, Channel List and FM Record. In the user mode, press "button to choose saved channel, press MENU button to display: Delete Channel, Auto Search, Channel List and FM Record. The reference interface is shown as below:

After Auto Search is selected, the system automatically searches radio channels. When a radio channel is found, the channel will be saved automatically and the radio channel number is saved in the channel list. In the frequency mode, users can save channels in a manual way. In user mode, users can choose Delete Channel to delete a current saved channel or Delete all saved channels. The device can store 40 radio channels at most. Saved radio channels can be seen from the channel list. Press "+" or "-" to switch among saved radio channels in sequence and press MENU button to start listening to the radio channel. If users choose FM Record, the system starts recording the radio. See the interface picture below:

II Setting Mode

From the main menu select Setting mode, press MENU button to enter. The Setting mode interface includes: Select Memory, Select Folder, Record Type, Digital Noise Reduction, Voice Activate Control, Listen In, Auto Divide Feature Recording, Backlight, Auto off, System Time, Recorder Timer, Language and Advanced. See the interface picture below:

(1)Select Memory

After the Micro TF is inserted into the device, device will display the other option: Card Memory. Users can select the storage location for recorded files. See the interface picture below:

English

Note

• PCM recordings are only stored in internal memory of the device.

(2)Select Folder

The recorded file can be stored in any of the A, B, C, D folder. See the interface picture below:

(3)Record Type

From the Record Type Menu users have five Record types for selection: HPCM Record, PCM Record, SHQ Record, HQ Record, SP Record and SLP Record. If the PCM record type is selected, the device saves the recorded file automatically when PCM recording reaches one hour, and then starts the next recording. See the interface picture below:

HPCM REC: WAV format, high sound quality, bit rate: 3072kbps.

PCM REC: WAV format high sound quality, bit rate: 1536kbps.

SHQ REC: MP3 format, high sound quality, bit rate: 192kbps. HQ REC: MP3 format, high sound quality, bit rate: 128kbps. SP REC: MP3 format, good sound quality, bit rate: 64kbps. SLP REC: MP3 format, ordinary sound quality, bit rate: 8kbps.

Telephone Record

Connect the telephone cable provided with the device and external telephone cable to the telephone adapter. According to the drawing, the operation is the same as recording with microphone.

Line in Record:

Line in recording is a way of recording sound by connecting the device to an audio equipment's audio output via a stereo

audio cable (audio equipments such as radio, CD, VCD, DVD etc.). Use the stereo audio cable provided with the device to connect the audio equipment's audio output with "Line in" jack of the device. The recording operation is the same as recording with microphone. Before recording with Line in jack, please adjust the volume of the sound source to a suitable level, otherwise the recorded sound may lack fidelity.

(4)Voice-activated Recording

This is a practical function of recording, no button operation is needed. When the function is enabled, in the course of recording, if no voice is detected, the device will automatically pause recording after 3 seconds; if voice is detected again, the device resumes recording. See the below related reference picture:

(5)The Listen In function

After activating the Listen In function, you can connect an earphone to listen if there's any sound input. See the Listen in function setting interface picture as follows:

English

(6)Automatic file splitting

When recording, the device will automatically save the recording file every 30 or 60 minutes, and then continue the recording. See the below related reference picture:

(7)Backlight Time

The backlight time function can be set at: 15, 30, 45, 60

seconds and Constant. If there's no operation on the device for the set time, the backlight turns off automatically. If you select 0, the backlight is to be always. See the below picture of Backlight Time setting:

(8)Auto off

If there's no operation on the device for a set time, the system automatically shuts down. If the time is set at 0, the system will not automatically shut down. See the below auto off picture:

(9)System time setting

See the below picture of System time setting:

On this interface, users can set the current time and the time display format.

For example, when select" Time Mode", the device shows the picture as follow:

From the list, users can choose one of two time display format: 12-hour clock or 24-hour clock. The default setting is 12-hour clock.

When select "Real Time", the device shows the picture as follow:

On this interface, press "+" or "-" button to set the real time. Press "+or" button to select "Year", "Month", "Day", "Hour", "Minute"; press "+" or "-" to adjust the value.

(10)Record timer

Record timer: preset the time at first, when system time reaches the set time, the device starts voice recording automatically.

From the menu list, select "Record Timer" to enter to set the record timer. See the below auto off picture:

The interface of Record Time is as follow:

English

On this interface, users can set the time when the device starts recording automatically. The method to perform the setting refers to "System Time Setting".

Record source: users can select either voice source from the microphone or radio by pressing "+" or "-" . The default setting takes the voice picks up by microphone as recording source.

See the below auto off picture:

If the "FM Source" is selected, the radio will be the sour for voice recording. Press Menu button to set the frequency point.

Duration:

Users can set the duration of recording to 30 minutes, 60 minutes, and 120 minutes or unlimited. See the below auto off picture:

Note

After the duration was set, please make sure the switch is in the position of ON when the device is power off, otherwise the device will not start recording when it reaches the preset time.

(11)Language

From the Language menu you can choose a language as system language. See the following interface picture:

(12)Advanced

The Advanced menu list includes: Information, Clear Internal Memory, Clear Card Memory and Reset Default Setting. See the following interface picture:

Information: users can check the device's firmware version and check the remaining capacity of memory by using this function.

Clear internal memory: users can format the device's internal memory by using this function.

Clear card memory: users can format the device's card memory by using this function.

Reset default setting: users can reset the system to default setting.

12 Frequently Asked Questions

Answers to the frequently asked questions are listed here to solve simple problems that may to the device. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support

Cannot switch on the device:

The battery is empty, please recharge promptly.

Cannot record with the device:

The maximum file number is exceeded or the device's memory is full. Please delete some recordings or move them to other storage devices.

The device cannot play recorded audio:

(I)The device may be in lock mode (HOLD). Slide the HOLD switch to OFF position.
(2) The battery is empty, please recharge.

13 Technical Parameters

Storage

Internal storage

Estimated recording time (16GB): 11 hours with HPCM

Recording mode, 22 hours with PCM Recording mode, 180 hours with SHQ Recording mode, 260 hours with HQ

Recording mode, 540 hours with SP Recording mode, approximately 4240 hours with SLP Recording mode.

Type of internal storage: NAND Flash

Portable storage (PC): Yes

Dimensions and Weight

Wide × Long × High: 38×104×14(mm)

Weight (with battery): 80g

System requirement

Operating System: Windows 7/Vista/XP/2000, Mac OS X, Linux

Port: USB

Recording

HPCM REC: bit rate3072kbps, WAV format

PCM REC: bit rate | 536kbps, WAV format

SHQ REC: bit rate192kbps, MP3 format

HQ REC: bit rate128kbps, MP3 format

SP REC: bit rate64kbps, MP3 format

SLP REC : bit rate8kbps, MP3 format

Operating conditions

Temperature: 5°–45°C

Humidity: 10% – 90%, no condensation

Warranty card

质保书

year warranty

一年质保

Type: VTR8010

Serial nr:

Date of purchase

购买日期

Dealer's name, address and signature

销售商名称、地址及签字

www.philips.com/welcome

This document is printed on chlorine free produced paper Data subject to change without notice

This product was brought to the market by Speech Processing Solutions GmbH or one of its affiliates, further referred to in this document as SPS, which is the manufacturer of the product. SPS is the warrantor in relation to the product with which this booklet was packaged.

For China only

只限中国地区

Printed in China

© 2015 Speech Processing Solutions GmbH.