1166 - Barcode Reader CipherLab - Free user manual and instructions
Find the device manual for free 1166 CipherLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2D Barcode Scanner |
| Model | 1166 |
| Brand | CipherLab |
| Dimensions (W x H x D) | Approx. 6.5 x 10.7 x 18.8 cm |
| Weight | Approx. 200 g (including battery) |
| Power Supply | Rechargeable Li-ion battery, 1800 mAh |
| Interface | Bluetooth 5.0, USB |
| Scan Engine | CMOS sensor, reads 1D/2D barcodes |
| Scan Angle | Horizontal: 40°, Vertical: 30° |
| Decode Capability | QR, Data Matrix, PDF417, UPC, EAN, Code 128, etc. |
| Operating Range | Up to 30 cm (depending on barcode density) |
| Battery Life | Up to 10 hours continuous scanning |
| Charging Time | Approx. 3 hours |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Drop Resistance | 1.5 m concrete |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety | Laser class 2, CE, FCC |
| Spare Parts | Battery, charging cradle, USB cable, hand strap |
| Repairability | Replaceable battery, lens cleaning recommended |
Frequently Asked Questions - 1166 CipherLab
How do I pair the CipherLab 1166 with a Bluetooth device?
Turn on the scanner. Put it in pairing mode by scanning the Bluetooth pairing barcode in the manual. On your device, search for Bluetooth devices and select "CipherLab 1166". Confirm the PIN if prompted (default 0000).
How do I charge the scanner?
Use the provided USB cable or charging cradle. Connect to a power source (5V/1A). The LED indicator turns red during charging and green when fully charged. Charging takes approximately 3 hours.
What types of barcodes can the 1166 read?
It reads most 1D (UPC, EAN, Code 128, Code 39) and 2D (QR, Data Matrix, PDF417, Aztec) barcodes. Refer to the manual for a full list.
The scanner beeps but does not output data. What should I do?
Check if the scanner is properly paired via Bluetooth or connected via USB. Ensure the correct interface mode (USB HID, SPP, etc.) is configured. Try scanning the default settings barcode to reset.
How do I clean the scanner?
Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol to gently wipe the lens and housing. Do not use abrasive cleaners or immerse in liquid.
What is the battery life of the 1166?
The rechargeable Li-ion battery (1800 mAh) provides up to 10 hours of continuous scanning. Standby time is longer. Replace the battery if runtime significantly decreases.
How do I reset the scanner to factory default?
Scan the "Factory Default" barcode provided in the manual. Alternatively, press and hold the trigger button for 10 seconds until the LED blinks rapidly.
Can I use the scanner without Bluetooth?
Yes, the scanner can be used with a wired USB connection. Connect the USB cable, and it will function as a HID keyboard wedge.
What does the LED indicator mean?
Solid green: ready/charged. Flashing green: scanning. Red: charging or low battery. Flashing red: error. Refer to the manual for detailed LED states.
How do I update the firmware?
Download the latest firmware from the CipherLab support website. Connect the scanner via USB, run the firmware update tool, and follow the on-screen instructions. Do not disconnect during update.
User questions about 1166 CipherLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual 1166 - CipherLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1166 by CipherLab.