DNR204P1 - Surveillance Camera FLIR - Free user manual and instructions
Find the device manual for free DNR204P1 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | FLIR |
| Model | DNR204P1 |
| Number of Channels | 4 channels |
| Video Compression | H.265, H.264 |
| Maximum Recording Resolution | 8MP per channel |
| Hard Drive Support | 1 SATA HDD (up to 10TB) |
| Network Interface | 10/100/1000 Mbps Ethernet |
| Power Supply | 12V DC, 2A |
| Dimensions (W x D x H) | 200 x 200 x 44 mm |
| Weight | 1.5 kg (excluding HDD) |
| Operating Temperature | -10°C to 55°C |
| Remote Access | Via mobile app and web browser |
| Audio Support | Two-way audio via IP cameras |
| Alarm I/O | 4 alarm inputs, 1 alarm output |
| Compatible Cameras | FLIR, Dahua, and ONVIF-compatible IP cameras |
| Power Consumption | <10W (without HDD) |
| Mounting | Desktop or rackmount (with optional kit) |
| Included Accessories | Power adapter, mouse, network cable, quick start guide |
Frequently Asked Questions - DNR204P1 FLIR
How do I set up the FLIR DNR204P1 for the first time?
Connect the NVR to your network via Ethernet, attach a monitor using HDMI or VGA, plug in the power, and follow the on-screen wizard. Ensure you have a hard drive installed (not included).
Can I access the DNR204P1 remotely?
Yes, download the FLIR Cloud app or use a web browser (IE, Chrome, or Firefox) to log in via your FLIR account. You must enable remote access in the NVR's network settings.
What cameras are compatible with the DNR204P1?
It works with FLIR IP cameras, Dahua, and any ONVIF Profile S/T compliant camera. Maximum resolution is 8MP per channel.
How do I add a camera to the NVR?
Go to Camera Management in the menu, click Add Camera, then either let the NVR auto-detect (if on same subnet) or manually enter the camera's IP address, username, and password.
Why is my DNR204P1 not detecting any cameras?
Ensure cameras are on the same network segment, PoE is active (if using PoE ports), and that the camera's firmware is up to date. Check firewall settings.
How do I configure motion detection recording?
In the Recording Schedule, select a camera, enable Motion Detection, define detection zones, and set the schedule to record on motion. Adjust sensitivity to avoid false alarms.
What is the maximum hard drive capacity supported?
The DNR204P1 supports one SATA hard drive up to 10TB. Use a surveillance-grade HDD (e.g., WD Purple, Seagate SkyHawk) for 24/7 operation.
Can I play back recorded footage on my smartphone?
Yes, using the FLIR Cloud app. Tap on the desired camera, select the date/time, and scroll through the timeline. You can also download clips to your phone.
How do I reset the DNR204P1 to factory defaults?
Locate the reset button (often a pin hole) on the back or bottom. Press and hold it for 10 seconds while the unit is powered on. This will erase all settings.
What should I do if the NVR is beeping continuously?
A continuous beep usually indicates hard drive failure or loss of camera. Check the hard drive status in the menu, replace if faulty. Also verify all cameras are connected.
User questions about DNR204P1 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual DNR204P1 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DNR204P1 by FLIR.
