DirectNET CDI2530PZ - Surveillance Camera Costar - Free user manual and instructions
Find the device manual for free DirectNET CDI2530PZ Costar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera, PTZ IP Camera |
| Brand | Costar |
| Model | DirectNET CDI2530PZ |
| Resolution | 2 Megapixels (1920x1080) |
| Optical Zoom | 30x |
| Pan Range | 360° endless |
| Tilt Range | 0° to 90° |
| Night Vision | IR LEDs up to 50m |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | 15W max |
| Dimensions (H x W x D) | 200 × 150 × 150 mm |
| Weight | 1.5 kg |
| Weatherproof Rating | IP66 |
| Network Interface | Ethernet RJ45 10/100 Mbps |
| Video Compression | H.264, H.265 |
| Motion Detection | Yes, configurable |
| Audio | Two-way audio, built-in mic & speaker |
| Storage | MicroSD card slot, NVR support |
| Cleaning and Maintenance | Clean lens with soft dry cloth periodically |
| Security | User authentication, password protection |
| Spare Parts & Repairability | Mounting bracket, power adapter available |
Frequently Asked Questions - DirectNET CDI2530PZ Costar
How do I reset the Costar DirectNET CDI2530PZ to factory defaults?
Press and hold the reset button (usually located near the network port) for 10 seconds while the camera is powered on. The camera will reboot and restore factory settings.
What is the default IP address of the camera?
The default IP address is often 192.168.0.10 or 192.168.1.10. Check the manual or use the Costar IP Finder tool to locate the camera on your network.
Can I view the camera feed remotely on my smartphone?
Yes, download the Costar DirectNET app (available for iOS and Android). Add the camera using its serial number or by scanning the QR code on the device.
How do I enable motion detection recording?
Log into the camera's web interface, go to Settings > Event > Motion Detection, enable it, and configure the detection area and sensitivity. Then set up recording to MicroSD or NVR.
What power supply do I need for the CDI2530PZ?
The camera supports Power over Ethernet (PoE) with an IEEE 802.3af switch. Alternatively, use a 12V DC power adapter (not included).
How do I update the camera firmware?
Download the latest firmware from the Costar support website. Log into the camera, go to Maintenance > Upgrade, select the firmware file, and click Upgrade. Do not power off during the process.
Why is the camera not displaying any video?
Check the network cable connection, ensure PoE or power is supplied, verify the camera is getting an IP address, and try accessing via the IP finder tool. Also check if the lens cap is removed.
What is the maximum MicroSD card size supported?
The camera supports MicroSD cards up to 128GB (Class 10 or higher recommended).
Can I pan and tilt the camera remotely?
Yes, the CDI2530PZ is a PTZ camera. You can control pan, tilt, and zoom via the web interface, mobile app, or by sending PTZ commands over the network.
Is the camera outdoor rated?
Yes, it has an IP66 weatherproof rating, making it suitable for outdoor use in rain and dust.
User questions about DirectNET CDI2530PZ Costar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual DirectNET CDI2530PZ - Costar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DirectNET CDI2530PZ by Costar.