SFO 2203 W - Dishwasher Scandomestic - Free user manual and instructions
Find the device manual for free SFO 2203 W Scandomestic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Scandomestic |
| Model | SFO 2203 W |
| Dimensions (H x W x D) | 845 x 598 x 600 mm |
| Net Weight | 45 kg |
| Capacity | 12 Place Settings |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 290 kWh |
| Water Consumption per Cycle | 12 L |
| Noise Level | 49 dB |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Rinse |
| Drying System | Condensation |
| Control Type | Electronic with LED Display |
| Delay Start | 1-24 Hours |
| Safety Features | AquaStop, Child Lock |
| Interior Material | Stainless Steel |
| Cutlery Basket | Adjustable |
| Upper Basket Adjustment | Height Adjustable |
| Lower Basket Features | Foldable Tines |
| Installation Type | Freestanding |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Consumption per Cycle | 1.05 kWh |
| Recommended Detergent | All-in-one Tablets or Powder |
Frequently Asked Questions - SFO 2203 W Scandomestic
How do I install the Scandomestic SFO 2203 W dishwasher?
Ensure the appliance is placed on a stable, level surface. Connect the water inlet hose to a cold water supply (3/4 inch thread). Connect the drain hose to the sink drain or standpipe. Plug the power cord into a grounded outlet. Refer to the manual for detailed installation instructions.
What should I do if the dishwasher doesn't start?
Check that the door is properly closed and latched. Ensure the power cord is plugged in and the circuit breaker is on. Verify that the water supply is turned on. Select a program and press the Start button. If still not starting, consult the troubleshooting section of the manual.
How do I clean the filters of the SFO 2203 W?
Turn off the dishwasher and remove the lower basket. Unscrew the filter assembly (cylindrical and flat filters). Rinse under running water to remove debris. Use a soft brush if needed. Reassemble and ensure they are tightly secured. Clean filters regularly for optimal performance.
What programs are available on the Scandomestic SFO 2203 W?
This model offers 6 programs: Eco (energy-saving, longer cycle), Intensive (high temperature for pots), Normal (daily use), Quick (30-minute light wash), Glass (gentle for delicate items), and Rinse (pre-rinse only). Select the program via the control panel.
How do I adjust the upper basket height?
Upper basket height can be adjusted by pulling out the basket halfway and releasing the side levers. Lower the basket to accommodate tall items or raise it for more space in the lower basket. Ensure the basket locks into the desired position.
What does the 'AquaStop' feature do?
AquaStop is a safety feature that prevents water leaks. If a leak is detected in the hose or internal parts, the system automatically shuts off the water supply and activates the drain pump. This protects your home from water damage.
How do I enable the child lock?
Press and hold the 'Child Lock' button (usually marked with a padlock icon) for 3-5 seconds until the indicator lights up. To disable, repeat the same step. When active, all buttons except the power switch are locked to prevent unintended use.
Why is my dishwasher not drying dishes properly?
Ensure rinse aid is filled in the dispenser. Use a drying program like Eco or Intensive which have higher final rinse temperatures. Check that the filter is clean and the water inlet temperature is at least 50°C. Avoid overloading and use the correct detergent.
What maintenance does the SFO 2203 W require?
Regularly clean the filters, spray arms, and door seals. Check the drain hose for kinks. Use a dishwasher cleaner monthly to remove grease and limescale. Ensure the salt and rinse aid reservoirs are topped up. For long-term care, run a maintenance cycle with a descaling agent.
How do I interpret error codes on the display?
Common codes: E1 (water supply issue), E4 (overflow or drain problem), E8 (heater malfunction). If an error appears, note the code and refer to the manual's troubleshooting guide. Often, turning off the dishwasher for 30 seconds and restarting resolves temporary faults.
User questions about SFO 2203 W Scandomestic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SFO 2203 W - Scandomestic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFO 2203 W by Scandomestic.