SD 46 E - Freezer Scancool - Free user manual and instructions

Product Type	Freezer
Brand	Scancool
Model	SD 46 E
Total Volume	100 L
Energy Efficiency Class	A+
Climate Class	SN-T
Temperature Range	-18°C to -24°C
Defrost Type	Manual
Fast Freeze Function	Yes
Temperature Control	Mechanical dial
Interior Light	No
Door Reversible	Yes
Height	85 cm
Width	60 cm
Depth	60 cm
Weight	35 kg
Noise Level	42 dB
Power Supply	220-240 V, 50 Hz
Annual Energy Consumption	200 kWh
Freezing Capacity	10 kg/24h
Storage Time During Power Failure	12 hours
Cleaning	Wipe interior with mild detergent
Spare Parts Availability	Yes, from manufacturer

Frequently Asked Questions - SD 46 E Scancool

How do I set the temperature on my Scancool SD 46 E freezer?

Turn the thermostat dial inside the freezer. The higher the number, the colder the temperature. Usually, setting 3 or 4 is recommended for normal use, giving about -18°C.

How often should I defrost my freezer?

Defrost when the frost layer reaches 5-10 mm thickness. This typically occurs every few months. Unplug the freezer, remove food, and let the ice melt naturally. Do not use sharp tools.

What is the best way to clean my freezer?

Unplug the freezer. Remove all food and shelves. Wipe the interior with a mixture of warm water and mild detergent. Rinse and dry thoroughly. Clean the exterior with a damp cloth.

Why is my freezer making noise?

Normal operation includes sounds like a humming compressor, refrigerant flow, or occasional clicks. If the noise is loud or irregular, ensure the freezer is level and not touching walls or cabinets.

Can I reverse the door opening direction?

Yes, the door is reversible. Refer to the manual for instructions. Generally, you need to unscrew hinges, swap them, and reattach the door. Tools required: screwdriver and wrench.

How do I store food properly in my freezer?

Wrap food tightly in freezer-safe packaging. Label with date. Avoid overfilling to allow air circulation. Separate raw meats from other foods. Do not store hot food directly.

What should I do during a power outage?

Keep the door closed. A full freezer can keep food frozen for about 12 hours. If power is out longer, use dry ice or transfer to another freezer. Check food safety afterwards.

How can I save energy with my freezer?

Place the freezer in a cool, ventilated area away from heat sources. Keep the door closed as much as possible. Defrost regularly. Set temperature to -18°C (not colder). Ensure door seals are clean.

What is the warranty period for Scancool SD 46 E?

Scancool typically offers a 2-year warranty for domestic use. Check your purchase receipt or contact customer service for precise details. Warranty covers manufacturing defects.

Why is my freezer not freezing properly?

Check thermostat setting, ensure door is sealing correctly, and condenser coils are clean. Allow 24 hours after initial setup. If problem persists, the compressor or gas may be faulty; contact a technician.

USER MANUAL SD 46 E Scancool

TRANSPORTATION AND INSTALLATION

Place on level floor and remove the bottom packing, in order to decrease the shock and noise.

The angle between the compartment body and ground should be no more than 45^ . Enough space should be left between the freeze and the wall for ventilation.

Place the freezer away from heat source and do not expose to direct sunshine.

Do not install where there is moisture or where it can easily be splashed by water.

Do not place the freezer in environment prone to freezing.

The appliance should not be used in open air and should not be exposed to rain.

ADJUSTMENT AND RUNNING

Adjustment of temperature: The storing temperature can be adjusted by the thermostat of the compartment. The thermostat should be adjusted according to different environment temperature and the food by rotating the knob of the thermostat. The knob rotates clockwise from "1" to "7" (or direction arc) and the inside temperature turns down in summer (anti-clockwise rotation) and up in winter (clockwise rotation). It is usually fixed to a certain point before leaving the factory. Do not adjust too often or touch the other parts.

Trial running: plug in and wait. The marked drop in temperature within half an hour indicates that the freezer works properly.

The compressor should be left to run for a period of time (6 hours in summer 4 hours in winter) before putting the foodin.

SAFETY PRECAUTIONS

The freezer should use a single 3-pin socket with (13A) fuse. A multi -plug outlet should not be used.

You should install a suitable automatic voltage regulator not less than 500w when the voltage is outside the range from 187V to 242V.

The sockets of the freezer should be connected to stable fixed connection. Under no circumstance should the wiring be connected to such facilities as water pipe, gas pipe and so on.

Once power is cut off, wait for at least 5 minutes before plugging in again to avoid damaging the compressor or the system.

Do not put combustible, explosive or volatile dangerous articles, heavily corrosive acid or alkali of liquid in glassware into the freezer.

Children should be kept away from the freezer to avoid damage to the inner container or any accidents being incurred

If the power cable damages, for avoid dangerous, must by manufactory or its maintain a set or similar profession jobthe personnel replaces.

FREEZING METHODS

Do not put too much food into the freezer or exceed the loading line.

Proper space should be allowed between foods to ensure cooling air circulation.

Never use corrosive detergent, hot water, or washing power to clean the freezer.

Do not use water to scour the freezer. Do not use hard brushes or wire brushes to clean the freezer.

Do not use metal or sharp tools for defrosting.

Do not use electric heaters to heat up and defrost.

The green lamp is a power indicating lamp. When the power is on, the lamp will be on.

Circuit diagram

Model......SD 46 E

Climate classification ....4

Anti-shock safety classification......I

Rated voltage....220-240v

Rated frequency....50Hz

Rated Current 1,2 A

Refrigerant....R290/40g

Model......SD 76 E

Climate classification ....4

Anti-shock safety classification......I

Rated voltage....220-240v

Rated frequency.... 50Hz

Rated Current.... 1,2 A

Refrigerant....R290/50g

Model...... SD 92 E

Climate classification 4

Anti-shock safety classification .... I

Rated voltage 220-240v

Rated frequency.... 50Hz

Rated Current.... 1,2 A

Refrigerant R290/50g

LED

• Lamp type: LED-light.
  • Energy efficiency level: G
• Light source in this product is replaceable only by a professional

TROUBLE SHOOTING:

The design and production comply with the relative security standard of China. If you find it does not work as usual, please examine and handle it according to the following table first. If the situation does not improve, you must contact our aftersale servicecenter or our special repair division to examine and repairthe appliance.

The following problems are not causes of breakdown:

There is a sound of liquid flowing in the freezer

It is the sound of refrigerant flowing in the circulating pipeline of the refrigerating system. It is normal.

Too noisy

The freezer is not installed in a level ground. Change the position.

The refrigerating system does not work for a long time but the inside temperature is very low

It is an indicator of high quality for its good insulation and low cooling retention low.

It is normal.

Trouble	Possibilities		Check up	Solutions	Remarks
Compressor does not work	Power is off	The fuse is broken	Check the fuse	Replace the fuse	If it is necessary plea-se contact after-salesservice for repair
		The connection between plug and socket is not good	Check the socket	Repair or replace the socket
		The circuit of input and output is out of use	Make sure that the power is on	Check the circuit with electric instrument
	The thermostat knob is not in the proper position		Check the thermostat	Rotate the thermo-stat to the proper position	Ask for professional help
Compressor keeps on working	The temperature inside is too high	Frost on the evaporator is too thick	Check whether the frost is thicker than 6-8mm	Defrost regularly
		The door is being opened too frequently		Reduce the times of opening
		Too much food has been stored at once		Take out some of the food
	The temperature inside is OK	The ambient temperature is too high .while the thermostat indicates a small number	Make sure whether the knob is indica-ting at the "5-6"(ordeeper)	Adjust the thermostat knob	The thermostat knobon"2-4"is better(or proper)
		The thermostat does not work		Replace the thermo-stat	Ask for after-saleservice
Too noisy	The floor is not level		Make sure that the freezer is level	Put pad under the castors
	The screw in fan or condenser is loose		The screw is loose	Rotate the fixed screw
	The refrigerating circuits touch each other			Separate them

TRANSPORT UND INSTALLATION

Access to professional repair, such as internet webpages, addresses, contact details.

Model no: SD 46 E

Aftersales service station list:

Address	Scandomestic A/S
Contact Number	7242 5571
Website	Scandomestic.dk
QR code	933269
Relevant information for ordering spare parts, directly or through other channels provided by the manufacturer, importer or authorised representative;	Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the appliance, are available;	8 years
Instruction on how to find the model information in the product database, as defined in Regulation (EU) 2019/2019 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product.)	www.scandomestic.dk

Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

DE

Access to professional repair, such as internet webpages, addresses, contact details.

Model no: SD 76 E

Aftersales service station list:

Address	Scandomestic A/S
Contact Number	7242 5571
Website	Scandomestic.dk
QR code	893198
Relevant information for ordering spare parts, directly or through other channels provided by the manufacturer, importer or authorised representative;	Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the appliance, are available;	8 years
Instruction on how to find the model information in the product database, as defined in Regulation (EU) 2019/2019 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product.)	www.scandomestic.dk

Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

DE

Access to professional repair, such as internet webpages, addresses, contact details.

Model no: SD 92 E

Aftersales service station list:

Address	Scandomestic A/S
Contact Number	7242 5571
Website	Scandomestic.dk
QR code	933308
Relevant information for ordering spare parts, directly or through other channels provided by the manufacturer, importer or authorised representative;	Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the appliance, are available;	8 years
Instruction on how to find the model information in the product database, as defined in Regulation (EU) 2019/2019 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product.)	www.scandomestic.dk

Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

DE

EU DECLARATION OF CONFORMITY

Ref. Ares In accordance with EN ISO 17050-1:2004

Model number (unique identification of the product):	SD 46 E
Name and address of the manufacturer or his authorised representative:	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
This declaration of conformity is issued under the sole responsibility of the manufacturer (or installer):	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
Object of the declaration (identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product, where appropriate.)Product: Commercial FreezerBrand: ScancoolColour: WhiteModel name: SD 46 E
The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation:	EN 61000-3-2
References to the relevant harmonised standards used, or references to the specifications in relation to which conformity is declared:	EN 55014-1:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55014-2:2015, 2014/30/EU, IEC 60335-2-89 :2010, AMD1:2012, AMD2:2015, IEC60335-1:2010, AMD1:2013, AMD2:2016, EN 60335-2-89:2010 + A1:2016 + A2:2017 EN 60335-1:2012 + A11:2014+ A13:2017 EN 62233:2008, 2019/2018, 2017/1369, 2019/2024, 2021/340, 2021/341, (MD) 2006/42/EC with amendment 2009/127/EC
Where applicable: the notified body ... (name, number)... performed ... (description of intervention)... and issued the certificate:
Additional information:	Commercial box

EU DECLARATION OF CONFORMITY

Ref. Ares In accordance with EN ISO 17050-1:2004

Model number (unique identification of the product):	SD 76 E
Name and address of the manufacturer or his authorised representative:	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
This declaration of conformity is issued under the sole responsibility of the manufacturer (or installer):	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
Object of the declaration (identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product, where appropriate.)Product: Commercial FreezerBrand: ScancoolColour: WhiteModel name: SD 76 E
The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation:	EN 61000-3-2
References to the relevant harmonised standards used, or references to the specifications in relation to which conformity is declared:	EN 55014-1:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55014-2:2015, 2014/30/EU, IEC 60335-2-89 :2010 + A1:2016 + A2:2017, AMD1:2012, AMD2:2015 in conjunction with IEC60335-1:2010, AMD1:2013, AMD2:2016 EN 60335-1:2012 + A11:2014+ A13:2017 EN 62233:2008, EU 2019/2018, EU 2021/340, EU 2019/2024, EU 2021/341, EU 2017/1369, (MD) 2006/42/EC with amendment 2009/127/EC
Where applicable: the notified body ... (name, number)... performed ... (description of intervention)... and issued the certificate:
Additional information:	Display Freezer

EU DECLARATION OF CONFORMITY

Ref. Ares In accordance with EN ISO 17050-1:2004

Model number (unique identification of the product):	SD 92 E
Name and address of the manufacturer or his authorised representative:	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
This declaration of conformity is issued under the sole responsibility of the manufacturer (or installer):	Scandomestic A/SLinåvej 208600 SilkeborgDenmark
Object of the declaration (identification of product allowing traceability. It may include a colour image of sufficient clarity to enable the identification of the product, where appropriate.)Product: Commercial FreezerBrand: ScancoolColour: WhiteModel name: SD 92 E
The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation:	EN 61000-3-2
References to the relevant harmonised standards used, or references to the specifications in relation to which conformity is declared:	2019/2018, 2017/1369, 2019/2024, 2021/340, 2021/341, EN 55014-1:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55014-2:2015, 2014/30/EU, IEC 60335-2-89 :2010, AMD1:2012, AMD2:2015, IEC60335-1:2010, AMD1:2013, AMD2:2016, EN 60335-2-89:2010 + A1:2016 + A2:2017 EN 60335-1:2012 + A11:2014+A13:2017 EN 62233:2008, (MD) 2006/42/EC with amendment 2009/127/EC
Where applicable: the notified body ... (name, number)... performed ...(description of intervention)... and issued the certificate:
Additional information:	Commercial box