XM-2VRSU717BT - Uncategorized Xomax - Free user manual and instructions

Product Type	Car Multimedia Receiver
Model	XM-2VRSU717BT
Brand	Xomax
Dimensions (W x H x D)	7 x 2.8 x 6.5 inches (approx.)
Weight	1.2 kg (approx.)
Power Supply	12V DC (negative ground)
Display	7-inch touchscreen
Radio Tuner	FM/AM with RDS
Bluetooth	Hands-free calling and audio streaming
USB Port	1 x USB for media playback and charging
SD Card Slot	Supports microSD up to 32GB
AUX Input	3.5mm front AUX
Audio Output	4 x 50W max power
Video Output	Rear camera input (CVBS)
Steering Wheel Control	Compatible (requires adapter)
Preset EQ	Multiple equalizer presets
Language Support	English, French, Spanish, etc.
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use harsh chemicals.
Safety Warning	Disconnect battery negative terminal before installation.
Spare Parts and Reparability	Contact authorized service center for replacement parts.
General Information	6-page user manual available for download in PDF.

Frequently Asked Questions - XM-2VRSU717BT Xomax

How do I pair my phone via Bluetooth?

Turn on Bluetooth on your phone and select 'XM-2VRSU717BT' from the list. Use a passkey if prompted (default 0000). The Bluetooth icon will turn blue when connected.

Can I use a rear-view camera with this unit?

Yes, it has a dedicated rear camera input. Connect the camera's video cable to the CVBS input and enable the rear camera option in settings.

What is the maximum USB/SD card capacity?

The USB port supports up to 32GB FAT32 drives. The microSD slot also supports up to 32GB.

How do I reset the device?

Press the reset button with a paperclip through the small hole next to the volume knob. Alternatively, disconnect the car battery for 10 seconds.

Does it support steering wheel controls?

Yes, but you need a separate steering wheel control adapter specific to your car model. Refer to the manual for wiring details.

Can I play video files?

Yes, it supports MP4, AVI, and MKV formats. Videos are displayed on the unit's screen when the car is parked (safety feature).

What are the dimensions?

The unit is 2-DIN standard (approx. 7 x 2.8 x 6.5 inches). Ensure your car's dashboard has a double-DIN slot.

How do I clean the touchscreen?

Use a soft, dry microfiber cloth. Do not use alcohol or abrasive cleaners to avoid damaging the screen.

Does it have a built-in amplifier?

Yes, it has a built-in 4x50W amplifier (max output). For better sound, consider adding external amplifiers.

Where can I find the user manual?

The user manual is available for free download in PDF on notice-facile.com. You can also request a translated version via email.

USER MANUAL XM-2VRSU717BT Xomax

INSTRUCTIONS

Please read all instructions carefully before using

INSTRUCTIONS

CONTENTS

Panel function description	02
Remote control function	03
Turn the Unit On/Off	05
Access main interface	05
U Disc/SD Card function operation	05
Radio Function Operation	06
IFT Function Operation	07
External input operation (Optional)	08
Steering wheel setting	08
EQ setting	08
Other Function Operations	08
Access setup interface	09
Audio setup	09
Date setting	09
General setting	09
System setting	09
Language setting	09
Touch calibration	10
Trouble shooting	10

INSTRUCTIONS

Touch calibrate

If touch calibration error occurs, you can adjust the touch coordinate by "touch calibrate". Click [Touch Calibrate] icon on system setting interface, to confirm to access touch calibration interface.

Touching methods

Use touch pen to click the center of "+” icon, and move along with center of "+” icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected.

Trouble shooting

PROBLEM CAUSE CORRECT ACTION
Cannot power on	Check fuse	Change fuse same as the old one
	Some factors cause MPU wrong operation	Press RLS button on the panel by penpoint, then,power on
After ignition switchoff, setting informationall lose	Change battery or fuse	Reset information and save
Poor performance ofradio station	Weak signal	Move the car to another place, then research
Cannot switchlanguage/subtile	There is only one language/subtile	If not with multi-language/subtile, it cannot switchlanguage/subtile
No image	Other factors cause MPU wrong operation	Press [RLS] button on the panel by penpoint, then,power on
Cannot watch imageduring driving	It's not allowed to watch image during driving.	Park the car in a safe place, put the car stall in "P"position, pull up the band brake, parking brake wiremust be grounded

INSTRUCTIONS

INSTRUCTIONS

Access setup interface

Click [Setup] icon on main interface to access setup interface.

Audio setting

Click [AUDIO] icon on setup interface to access audio setting interface.

You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume.

Date setting

Click [DATE] icon on setup interface to access time setting interface.

Click [21 Hour] icon on time bar [Time Mode 24 Hour] time setting interface shall display, Can be set time mode.

Click [03:07] icon on time bar [Set Time 05:07] time setting interface shall display. Can be set time Click [2012/01/01] icon on time bar [Set Date 2012/01/01] time setting interface shall display. Can be set Date.

General setting

Click [GENERAL] icon on setup interface to access general setting interface.

In general setting interface, you can select to turn on or turn off the existing functions.

System setting

Click [SYSTEM] icon on setup interface to access system setting interface.

Language setting

During use, you can select your familiar language to display menu by language setup. Click the corresponding [English] icon on the language bar desired to be set so as to switch the language type, when there are more than 3 languages. direction icon shall pop up, click it to select your familiar language.

Panel function description

1. SRC button
   Press the button to turn on the power when power is connected, in active status long press the button to turn off. In any mode, short press the button to back to main menu when power is on.
2. MODE button
   Press this button for a short moment to turn on power. Every button-press activates mode change as follows:
   RADIO → USB (Optional) → SD (Optional) → AUX → BT (Optional) → RADIO
   Note: When the device without connection to USB, SD, the system will automatically skip these related working mode.
3. VOL +/- button
   Press this button to increase/reduce the volume.
4. SEEK +/- button
   Radio mode, short press of the button can be up or down step search for the station, long press of the button can automatically scan for stations. Playback mode, short press the button can be achieved with short upward or downward selections; long press of the button allows fast forward or rewind playback.
5. MC TE button Press the button to close volume output, re press it to resume previous volume level.
   When this is a calling coming in, press this button to answer the phone.
6. RESET
   Press this button can back to default mode.
   s. TR
   To receive infrared signals from the remote control matched with the unit.
7. USB slot
   Insert USB removable device so as to read audio/video files.
8. AUX slot
   To input external audio.
9. SD slot
   Connect the SD memory card to this socket, and the unit can play MP3 music.
10. MTC
    Input socket for microphone.

INSTRUCTIONS

Remote control function

1. ⏻ (Power) button

Press the button to turn power on/off.

1. MODE (mode switch) button

When the power is on, each time the button is pressed, the mode switches between RADIO/USB/SD (MMC)/AUX.

1. (Mute) button

Press the button to turn off volume output, repress the button to resume previous volume level.

1. Number button

.Number button 1/2NT (track browse & playback)

Under FM/AM radio status, short press the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 1's position. Browse & playback.

Under USD playback status, press the button to browse and play the previous 10 songs, each for 10 seconds, re-press it to cancel browsing and playback.

.Number button 2/RPT (repeat playback)

Under FM/AM radio status, short press the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 2's position. Repeat playback.

Under USB playback status, press the button to repeatedly play the current song, re-press it to cancel repeat playback.

.Number button 3/RDM (random playback)

Under FM/AM radio status, short press the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 3s position. Random playback.

Under USB playback status, press the button to play songs randomly, re-press it to cancel random playback.

.Number button 4/▶

Under FM/AM radio status, touch the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 4's position.

Under USD playback status, press the button to select the current folder.

INSTRUCTIONS

External input operation (Optional)

Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack.

Touch [Aux] icon on main interface to access external input interface.

Steering wheel setting

1. Click on the [Steer] icon in the main interface into the steering wheel settings interface.

2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection.

3. Click the steering wheel buttons will appear corresponding operating tips, and fundamental operation prompts the steering wheel feature set.

4. Set function to save the settings and click the Confirm icon to confirm.

Note: To modify function settings, repeat procedures 3-4.

To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat procedures 3-4 for resetting.

EQ setting

Click on the [LQ] icon in the main interface enter the LQ setting interface.

Drag on each volume, treble, bass bar icon associated settings.

Click 📄 icon to adjust the speaker channel. Click I OLD icon at the option on / off loudness.

Click SUB icon at the option on / off subwoofer. Click RESET icon restore the initial settings.

Other functions

Rearview function

In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.

Warning

Do not rely on CCD system completely, please make sure your car is safe by your eyes during driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.

Reverse field simulation

Ranview backup image

INSTRUCTIONS

INSTRUCTIONS

BT Function Operation

1. Enter/exit

Touch [BT] icon in the main interface to enter the BT interface (PIC 1).

it 5 icon to exit BT interface.

2. Pair/link

To use BT hand-free function, make connection first, i.e. match the host with the BT mobile phone. Operation methods:

Set the host to be matching state, and open the BT of your mobile phone and use the mobile phone to search device, the mobile phone shall prompt to match password with the BT when it has searched the BT device.

Input BT password (0000) to the mobile phone and confirm. The mobile phone shall prompt whether authorize to this device, please select [Yes]. Phone and BT shall automatically connect within 20 seconds. Under any working mode, the host shall convert to BT state if there is an incoming call. And the host shall restore to current mode after hanging up.

When the BT device matches with this device, the connection status shall display "LINK OK", otherwise, it shall display "NO LINK".

3. Dialing

You can dial on mobile phone directly or input phone number through the number buttons on the screen, click 🔒 to delete if there is input error.

After input the phone number, click to make a call, and click to hang up the phone. Click during a call so as to switch the voice between car speaker and mobile phone.

4. Call records

Click to access call records interface (PIC 2).

Touch this button to check all the phone numbers or received calls. Touch this button to check all the dialed phone numbers.

Touch this button to check all the phone numbers of missed calls.

5. BT music

Click to access BT music interface (PIC 3).

PIC 1

PIC 2

Previous song. PlayPause Next song PIC 3

.Number button 5 Long press 5/DIR- to select the previous

folden/short press to play the -ll song,

Under FM/AM radio status, touch the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 5's position.

Under USB playback status, touch the button to select the -10 song cyclically. Long touch the button to select the previous folder.

.Number button 6 Long press 6/DIR+ to select the next folder/short press to play the +10 some.

Under FM/AM radio status, touch the button to get into the corresponding stored radio channels. After searching for a station manually, hold the button for 2 seconds to save the station in the number button 6's position.

Under USB playback status, touch the button to select the +10 song cyclically. Long touch the button to select the next folder.

1. SEL Button

The function is the same as the function of SEL button on panel.

1. ■/5 Button

In radio/AUX mode, press the button to return to the interface; In USB/SD mode, press the button: current interface → repertoire interface → interface.

1. -/ - / | / . Button

In DVD mode, press “+” button to select the folder • AUDIO • IMAGE, press “→” button to select the next folder.

1. OK button

9.VOL+'-button

Press this button to increase/decrease volume level.

1. ▶Button

Press this button so as to switch between play and pause.

1. Button

The function is the same as the function of 🎨 buttons on panel.

BATTERY CHANGE

When control distance of remote control becomes shorter or no function, please change battery, please confirm polarity before change.

One hand press stopper, then pull out battery.

Put battery into controller.

Insert battery holder into controller.

INSTRUCTIONS

Turn on/off Host

When the ignition switch is put in ACC or ON position, Press [☐] button on the front panel to turn on the unit. After the host starts, hold [☐] button for 3 seconds, the host will turn off.

Access main interface

Turned on, the interface to return the icon to switch to the main interface. As shown below:

Touch the function icons so as to access the corresponding function operations.

U Disc/SD Card function operation

When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card. Insert/Eject USB storage device

1. Connect a U disc recorded with media information to the unit by a USB connecting cable

2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.

Insert/eject SD card

1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.

2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.

Enter/exit

Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD

card, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; touch [SD] icon to enter into

the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch.

menu to perform various playback controls.

Play

After SD card/USB removable device being read out, you can by clicking the play files.

Native support for playback the MP5 formats (including: *.rm, *.mvb, *.wmv, *.wma, *.wav, *.dat, *.flv, *.asf, *.mov, *.DivX, *.vob,

.avi,* (sm,*.mp3,*.mp2,*.mp4,*.mpg,etc.)

INSTRUCTIONS

Radio Function Operation

1. Enter'exit

Touch [Radio] icon in the main interface to enter into the radio interface.

Touch icon to return to main interface, and then touch other function icons so as to exit radio

mode

1. Mute: Click icon, mute on/off.

2. Bar

Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.

1. Search/Save radio stations

Short press icon to browse the stored radio stations. FM band can save 18 radio stations

(Six stations for FM1/FM2/FM3), AM hand can save 12 radio stations (5ix stations for AM1/AM2).

1. Sound setting: Click icon to access sound setting interface.

2. Turn on/off the Long/Short-range

Click icon, the search pattern in the local search (LOC) and remote search (DX) switch between.

LOC feature is turned on after the signal is strong enough only to listen to those in good condition

and receiving radio station, DX enabled, you can receive remote weak radio signals:

Note: This function is available only when FM band is selected.

1. Loudness on/off

Click icon so as to turn on/off loudness function.

1. Stereo on/off

When receiving stereo signals, click icon to turn on/off stereo.

1. TA (Receive traffic information)

ON: When the traffic station is turned on, the radio will automatically search for traffic stations. After a station is searched, screen

displays "IP". Only when traffic information is broadcasted can it be received, after traffic information is completed, the radio will

automatically switch to the previous mode.

OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically switch to radio mode, after the

traffic announcement is completed, it will automatically switch to the previous mode

1. AF

Touch the button to turn the AF function on/off. AF function is turned on. When the received station signals become weak, the radio

will automatically fine-tune to other frequencies. When receiving an emergency announcing, the screen will display warning message.

1. PTY

Touch the button the screen displays program types, users can search station according to program type.

Note: If the unit does not have RDS function, it has no AUTL AUTY function.