TL-SL2452WEB - Switch TP-LINK - Free user manual and instructions
Find the device manual for free TL-SL2452WEB TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Layer 2 Switch |
| Ports | 48 x 10/100 Mbps RJ45, 2 x Combo Gigabit SFP/RJ45 |
| Switching Capacity | 17.6 Gbps |
| MAC Address Table | 8K entries |
| Dimensions (W x D x H) | 440 x 220 x 44 mm (19-inch rack mountable) |
| Weight | 3.5 kg (7.7 lbs) |
| Power Supply | 100-240 VAC, 50/60 Hz internal power supply |
| Power Consumption | 30 watts (max) |
| Management | Web-based GUI, SNMP v1/v2c, CLI (Telnet/SSH) |
| VLAN Support | 802.1Q VLAN up to 256 groups |
| QoS | 802.1p priority, 4 queues |
| Security | 802.1X, ACL, Port Security, Storm Control |
| Link Aggregation | 802.3ad LACP up to 6 groups |
| Spanning Tree | 802.1d STP, 802.1w RSTP, 802.1s MSTP |
| IGMP Snooping | v1/v2 |
| Maintenance | Clean with dry cloth; avoid liquids; keep vents clear |
| Safety | CE, FCC, RoHS certified; operating temperature 0-40°C |
| Spare Parts & Repairability | Contact TP-Link support; no user-serviceable parts inside |
| Package Contents | Switch, power cord, rack mount kit, console cable, quick installation guide |
| Warranty | Limited lifetime warranty (varies by region) |
Frequently Asked Questions - TL-SL2452WEB TP-LINK
How do I reset the TP-Link TL-SL2452WEB to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds until the System LED blinks. The switch will reboot with default settings.
What is the default IP address of the switch?
The default IP address is 192.168.0.1 with subnet mask 255.255.255.0. The default username and password are both admin.
How to enable VLAN on the switch?
Log into the web interface, go to VLAN > 802.1Q VLAN, create a VLAN ID and name, then assign ports to the VLAN with tagged or untagged membership.
Can I use fiber optic connections with this switch?
Yes, the combo ports (ports 49-50) support SFP modules for fiber optic connections. Ensure the SFP module is compatible with the switch.
How to upgrade firmware?
Download the latest firmware from TP-Link's website, then go to Maintenance > Firmware Upgrade in the web interface, select the file, and click Upgrade. Do not power off during the process.
What is the maximum power consumption?
The maximum power consumption is 30 watts. The switch uses an internal power supply with auto-sensing voltage (100-240 VAC).
Does it support SNMP?
Yes, it supports SNMP v1 and v2c for network management. You can configure community strings and trap settings in the web interface under SNMP.
How do I configure port mirroring?
Go to Monitoring > Port Mirroring, select the source port(s) and the target port (monitor port), then enable mirroring. Traffic on source ports will be copied to the monitor port.
What is the operating temperature range?
The switch operates in temperatures from 0°C to 40°C (32°F to 104°F). Store in a well-ventilated area.
Is it rack-mountable?
Yes, the switch comes with rack-mount brackets and is designed for standard 19-inch racks. It is 1U height.
User questions about TL-SL2452WEB TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual TL-SL2452WEB - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TL-SL2452WEB by TP-LINK.
