JW0005 - Security Camera Wanscam - Free user manual and instructions
Find the device manual for free JW0005 Wanscam in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (IP Camera) |
| Brand | Wanscam |
| Model | JW0005 |
| Dimensions | 150 mm × 60 mm × 60 mm (approximate) |
| Weight | 350 g (approx.) |
| Power Supply | DC 12V, 1A (power adapter included) |
| Image Sensor | 2MP CMOS |
| Resolution | 1920×1080 (Full HD) |
| Lens | 3.6 mm fixed lens, 78° viewing angle |
| Night Vision | Infrared LEDs, range up to 20 meters |
| Network | Wi-Fi 802.11 b/g/n |
| Storage | MicroSD card (up to 128 GB) and cloud storage |
| Motion Detection | Yes, with push notifications via mobile app |
| Two-Way Audio | Yes, built-in microphone and speaker |
| Waterproof Rating | IP66 (suitable for outdoor use) |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Mounting | Wall mount bracket and hardware included |
| Mobile App | Wanscam Viewer (available for iOS and Android) |
| Recording | Continuous, scheduled, or motion-triggered recording |
| Maintenance & Cleaning | Clean the lens and housing with a soft, dry cloth. Avoid using solvents. |
| Safety | Use only the supplied power adapter. Do not immerse in water. Ensure proper ventilation. |
| Spare Parts & Repairability | Power adapter, mounting screws, and antenna (if detachable) are available. Contact support for repairs. |
| General Information | Designed for home or office security surveillance. Supports remote live view and playback. |
Frequently Asked Questions - JW0005 Wanscam
How do I set up the Wanscam JW0005 for the first time?
Download the Wanscam Viewer app from the App Store or Google Play. Connect the camera to power, wait for the LED to flash. In the app, create an account, tap 'Add Device', scan the QR code on the camera, and follow the on-screen instructions to connect to your Wi-Fi.
Can I view the camera remotely?
Yes, you can view live footage via the Wanscam Viewer app on your smartphone or tablet from anywhere with an internet connection.
How do I reset the camera to factory defaults?
Press and hold the reset button (usually located near the power port) for about 10 seconds until you hear a beep. The camera will reboot and all settings will be erased.
What app do I need for the Wanscam JW0005?
The official app is Wanscam Viewer. It is free and available for both iOS and Android devices.
How do I insert a MicroSD card into the camera?
Locate the MicroSD card slot, usually under a waterproof cover. Gently push the card in until it clicks. To remove, push again to eject. The card supports up to 128 GB.
Does the camera support night vision?
Yes, it has built-in infrared LEDs that automatically activate in low light, providing black-and-white footage up to 20 meters.
How do I enable motion detection alerts?
In the Wanscam Viewer app, go to the camera settings, find Alarm Settings, and enable Motion Detection. You can adjust sensitivity and set notification preferences.
Is the JW0005 rated for outdoor use?
Yes, it has an IP66 weatherproof rating, meaning it is resistant to dust and water jets. It can be installed outdoors under an eave.
How do I update the camera firmware?
In the Wanscam Viewer app, go to the camera settings and select Firmware Update. The app will check for updates and guide you through the installation. Ensure the camera stays powered during the update.
Is the Wanscam JW0005 compatible with Alexa or Google Assistant?
No, this model does not natively support voice assistants. It works exclusively through the Wanscam Viewer app.
User questions about JW0005 Wanscam
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual JW0005 - Wanscam and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JW0005 by Wanscam.