DS-7604NI-SE - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-7604NI-SE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Model | DS-7604NI-SE |
| Brand | Hikvision |
| Channels | 4 IP camera inputs |
| Recording Resolution | Up to 4K (8MP) per channel |
| Dimensions (W x D x H) | 315 x 240 x 48 mm (12.4 x 9.4 x 1.9 inches) |
| Weight | Approximately 1.5 kg (3.3 lbs) |
| Power Supply | DC 12V, 1.5A (external adapter) |
| Power Consumption | ≤ 18W (without HDD) |
| Hard Disk Drive Support | 1 SATA HDD up to 6TB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Recording Modes | Continuous, schedule, motion detection, alarm |
| Network Connectivity | 1 RJ45 10/100 Mbps Ethernet port |
| Remote Access | Via Hik-Connect or web browser |
| Output Interfaces | HDMI (4K), VGA (1080p), 1 audio out |
| Alarm I/O | 4 alarm inputs, 1 alarm output |
| Operating Temperature | -10°C to 55°C (14°F to 131°F) |
| Maintenance | Regular HDD health check, firmware updates |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Safety Features | Overvoltage protection, surge protection |
| Spare Parts / Repairability | Power adapter, HDD, fan; serviceable by technician |
| General Information | Plug-and-play with Hikvision cameras, ONVIF compatible |
Frequently Asked Questions - DS-7604NI-SE Hikvision
How do I connect the NVR to my network?
Connect an Ethernet cable from the NVR's LAN port to your router. Then use the Hik-Connect app or a web browser to access the NVR with its IP address.
What cameras are compatible with the DS-7604NI-SE?
It works with Hikvision IP cameras and many ONVIF-compatible cameras. Ensure cameras are on the same network segment.
How do I set up motion detection recording?
Go to Configuration > Events > Motion Detection, enable it, and set sensitivity. Then configure recording schedule to trigger on motion.
Can I view the cameras remotely?
Yes, via the Hik-Connect app or by forwarding ports on your router. Enable remote access in the NVR's network settings.
How do I install a hard drive in the NVR?
Power off the NVR, remove the lid, connect the SATA cable to the HDD, and secure it in the drive bay. Reassemble and power on.
What should I do if the NVR does not detect cameras?
Check that cameras are powered and connected to the same network. Use the 'Search' function in the NVR's Camera Management menu.
How do I update the firmware?
Download the latest firmware from Hikvision's website. Upload it via Configuration > System > Firmware Update. Do not turn off the NVR during update.
What is the maximum hard drive capacity?
The NVR supports one SATA HDD up to 6TB. For larger capacities, check compatibility with Hikvision's specifications.
Can I use the NVR without a hard drive?
Yes, but recording will not be possible. The NVR can still stream live video, and you can record to a network storage (NAS) if supported.
How do I reset the NVR to factory defaults?
Press and hold the reset button on the back for 10 seconds while powered on. Alternatively, use the menu: Configuration > System > Factory Default.
User questions about DS-7604NI-SE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-7604NI-SE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7604NI-SE by Hikvision.