ZCK1172X - Kettle Zelmer - Free user manual and instructions

Product Type	Electric Kettle
Brand	Zelmer
Model	ZCK1172X
Capacity	1.7 L
Power	2200 W
Voltage	220-240 V ~ 50/60 Hz
Dimensions (W x D x H)	22.5 x 15.0 x 24.0 cm
Weight	1.2 kg
Housing Material	Plastic with stainless steel finish
Heating Element	Concealed stainless steel
Auto Shut-Off	Yes
Boil-Dry Protection	Yes
Cordless Base	Yes, 360° rotation
Lid Type	Flip-top with one-button opening
Filter	Removable scale filter
Water Level Indicator	Yes, transparent window with markings
Power Indicator Light	Yes
Spout Design	Gooseneck with fine mesh filter
Handle	Ergonomic, stay-cool
Cord Length	0.75 m
Cleaning	Wipe with damp cloth; descale regularly using vinegar or citric acid
Maintenance	Descaling every 1-2 months depending on water hardness
Safety Certifications	CE, RoHS
Warranty	2 years

Frequently Asked Questions - ZCK1172X Zelmer

How do I clean my Zelmer ZCK1172X kettle?

Unplug the kettle and let it cool. Wipe the exterior with a damp cloth. For the interior, fill half with equal parts water and white vinegar, boil, let sit 30 minutes, then rinse thoroughly. Alternatively, use a commercial descaling product. Do not immerse the base in water.

What is the capacity of this kettle?

The Zelmer ZCK1172X has a capacity of 1.7 liters, suitable for boiling up to 7 cups of water.

Does it have automatic shut-off?

Yes, the kettle automatically switches off once the water reaches boiling point. It also has boil-dry protection for safety.

Can I boil less than the minimum water level?

No, you must fill at least to the minimum mark to avoid damage to the heating element and risk of overheating. The min is typically 0.5 L.

How do I remove limescale build-up?

Use a descaling solution or a mixture of equal parts water and white vinegar. Fill to the max line, boil, let stand for 30 minutes, then rinse. Repeat if necessary. Do not use abrasive products.

Is the kettle cordless?

Yes, it has a 360° cordless base, so you can lift the kettle freely without a cord. The base stores the cord neatly underneath.

What type of filter does it have?

It has a removable scale filter at the spout to catch limescale particles. You should clean it regularly under running water.

Can I open the lid while boiling?

It is not recommended to open the lid during operation as hot steam may escape and cause burns. Always switch off and wait for cooling.

What should I do if the kettle does not heat?

Check that the base is properly connected and the kettle is seated correctly. Ensure the appliance is switched on. If still not working, contact Zelmer customer service. Do not attempt to repair yourself.

Is the kettle BPA-free?

Yes, the materials used in contact with water are BPA-free and food-safe. The plastic parts are made from high-quality, non-toxic materials.

USER MANUAL ZCK1172X Zelmer

(2) minimum water gauge

CHI-1000017

zelmer

www.zelmerpl www.zelmer.com

zelmer

CK1400

Product photo of a kitchen keener with glass and plate, no visible text or symbols

PRTSTICKA ELEKTRYKANNAOZAJNK ELEKTRYCZNYTos CK1400	4-5	NIE BURG TIN ELI DE LAVE,PEIKBATOR ELECTRCTb TC 1400	18-19	VORPOKIO ELEKTRYKALAELEKTRINAVI VRDULSAITos CK1400	26-30
MAYO KONJDI ELEKTRICKA KONVICETos CK1400	7-9	JIE KEPKCHNIK D ZEBRAHMAHPELEKTPNECKOMI YAHNIKTox CK1400	18-19	LEKTRAVNI BSEKTRAKAELEKTRISKAS TUKANNASTos CK1400	31-32
MAYO KONJDI ELEKTRICKA KANVICATos CK1400	10-12	JIE KEPKCHNIK D ZEBRAHMAHELEKTPNECKA KAIATox CK1400	22-24	KOSKISTALI VLELELEKTRITECKANNUDTuS CK1400	34-36
HAZKVALUTEN IESELEKTRONOS VIZFORRALOCK1400 Tots	13-15	JE KEPKCHNIK POKCE PAKHNAHELEKTPVAHNIKTox CK1400	25-27	KOSKANTILPELECTRIC KETTLToS CK1400	37-38

CK1400

m = 311

[Unreadable]

m = 311

注：

1. 2017年

m = 311

bluanyan

[Unreadable]

m = 311

1. 2017年1月1日

m = 311

1. 1984.

m = 311

M

The quick brown fox jumps over the lazy dog.

zelmer

www.zeimer.cl

www.csc.com.cn

A

B

C

Szanowni Klienci!

Congratulations on your choice of Zelmer electric kettle, and welcome among the users of Zelmer products.

In order to achieve best results, we recommend using only original Zelmer accessories. They have been specially designed for this product.

Please read this user manual carefully. Special attention should be paid to the safety precautions. Please keep this manual safe for future reference.

Safety precautions and instructions on the proper use of the electric kettle

Read this entire manual carefully before using the appliance.

Make sure that you understand the below safety precautions.

Danger! / Warning! Risk of injury

Special attention should be kept when using the kettle in the presence of children.
Do not operate the kettle if the power cord is damaged or if there is any visible damage to the kettle body.
Do not plug the power cord with wet hands.
the non-detachable power cord is damaged, it should be replaced by the manufacturer, an authorised service point or a qualified person in order to avoid any hazards.
Only qualified staff may repair the appliance. Improper repair may cause a serious threat to the user. In case of any defects, contact an authorised ZELMER service point.
Do not touch the metal body of the kettle when in use; move the kettle only using the handle.
Do not touch any hot surfaces of the kettle. Surfaces remain hot even after the device is switched off.
Do not fill the kettle beyond the maximum fill indicator "max" – water might spatter out of the kettle.
Be careful not to wet the plug of the power cord.
- team coming out of the kettle when the water is boiling may cause scalding.
Allow the kettle to cool completely before cleaning.
Do not open the lid while the water is boiling.
Always remove the plug from the mains before cleaning the kettle.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

Warning! Risk of property damage

Always plug the appliance to the mains (AC only) with voltage corresponding to that indicated on the rating plate.
Always place the kettle on a stable, smooth, flat surface; the power cord must not hang loosely off the edge of a table (or any other work surface) or touch a heated surface.
Do not remove the plug from the mains by pulling by the cord.
This appliance is intended for indoor use only.
The kettle can only be operated with the original power base (each base is type-specific).
Use the kettle for boiling water only.
Do not open the lid right after the water has boiled – steam might condense and appear on the exterior of the kettle.
Do not place the kettle on or near hot objects.
Do not immerse the kettle or the power base in water when filling or washing the electric kettle.
water gets into any electric elements inside the kettle or onto the base, carefully dry these elements before plugging the kettle to the mains.
Do not operate the kettle when empty.
Do not use the kettle with the lid open – the automatic shut off will not work then.
Do not use any abrasive cleaning agents – such as emulsions, creams, pastes, etc. – for cleaning the kettle body. They might remove graphic information symbols, such as scales, marks, warning signs, etc.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.

Product information and tips on use

The appliance is intended for domestic use. In case it is used for food business purposes, the warranty conditions change.

Do not use the kettle without the filter.

Technical data

The technical parameters are given on the rating plate of the product.

1.7 litre capacity.

The kettle is built in insulation class I and is equipped with a power cord provided with a grounding wire and a grounding plug.

The kettle meets the requirements of valid standards.

The appliance is compliant with the requirements of the following directives:

Low Voltage Directive (LVD) - 2006/95/EC.

Electromagnetic Compatibility (EMC) - 2004/108/EC.

The product is affixed with the CE mark on the rating plate.

Kettle elements (Fig. A)

1 Spout
2 Plastic spout protection – steam protect
3 Kettle body
4 Water level indicator
5 360° swivel base
6 Lid release button
7 On/off switch (0-1)
8 Handle
9 Anti-deposit filter
10 Cord storage
11 Termo-wskaźnik

tic spout protection – steam protect (2) prevents the steam from being released when water is boiled. The protection also reduces energy losses, maintaining the heat inside the kettle for a longer time.

Preparing the kettle for operation

ore first use, wash the kettle inside (for washing instructions see the "Cleaning and maintenance" section), fill it with water up to the "max" level, boil water four times (each time use fresh water) and wash the kettle inside again.

Operating the kettle (Fig. B)

① Press the button (6) and open the lid.
② Place the filter (9) in the kettle (if it is not in place).
③ Fill the kettle with the desired amount of water (the level is visible on the indicator (4)).

ot boil the water if it is below the minimum level or beyond the maximum level on the indicator (4).

④ Close the lid.
⑤ Place the kettle on the base (5).
⑥ Plug the kettle to a socket provided with an earth pin.
⑦ Turn the kettle on by pressing the switch (7) – the water level indicator will light up (4).

in water is boiled, the thermo-indicator will turn from brown to red. The red colour informs that the appliance is hot.

⑧ After the water is boiled, the kettle will switch off automatically, the lever switch will return to its starting position and the power indicator will go off.

If you plan to use the kettle again soon, it is not necessary to remove the plug from the mains.

Make sure that the maximum kettle capacity is not exceeded when the kettle is filled with water.

In the event that an empty kettle is switched on, it will be switched off automatically by a thermal device.

To switch on the kettle after it has cooled down (about 15 min), remove it from the base, fill with water, replace on the base and switch on by pressing the switch (7). The cooling down of the kettle can be accelerated by pouring cold water into the kettle.

Cleaning and maintenance

(Fig. C)

Always allow the kettle to cool down completely before cleaning!

① Unplug the kettle from the mains.
② Remove the filter (9) and rinse it under running water.
③ Clean the outside surfaces with a soft damp cloth and washing-up liquid.

In order to remove the build-up of hard water film from the outside and inside walls of the kettle, wipe them with a damp cloth and vinegar.

④ Rinse the kettle with fresh water.

Various black-coloured, rusty, milky, etc. deposits may form inside the kettle and float on the water. This is caused by minerals occurring naturally in water (calcium, magnesium, iron, etc.). Such discoloration is not caused by faulty operation of the appliance and does not affect its use. In case of substantial accumulation of mineral deposits, proceed as described in the "Descaling" section.

Descaling

In the event that scale builds up on the bottom of the kettle, it needs to be removed. For this purpose use 6 - 10% vinegar or citric acid.

• open the lid by pressing the lid release button (6).
  add 0.5 l of vinegar or 40 g of citric acid and fill the kettle with water up to the maximum level. Switch on the kettle.
  Bring the mixture to boil and allow the kettle to stand for 30 minutes.
  Empty the kettle and rinse it with fresh water.
  Remove the filter (9) and rinse it under running water. Replace the filter.
  Fill the kettle with fresh water, boil the water and empty the kettle.
  sediment is still visible in the kettle, remove it with a sponge and rinse the kettle again. If unsuccessful, repeat the descaling process.

kettle should be descaled periodically to avoid its possible damage.

Ecology – environment protection

Each user can help protect the environment. It is neither difficult nor expensive. In order to do it, remember to discard the cardboard packing into a recycling paper container and the polyethylene (PE) bags into a container for plastics.

Dispose of the worn out appliance by handing it over to a local disposal centre, as the dangerous elements of this appliance can be hazardous to the environment.

Do not dispose the appliance together with other domestic wastes!!!

The importer/manufacturer is not liable for any damages resulting from improper use or handling of the appliance.

The importer/manufacturer reserves the right to modify the product at any time and without prior notice in order to adjust it to valid law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons.

Notes