Ride - Bike computer Kellys - Free user manual and instructions
Find the device manual for free Ride Kellys in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bike Computer |
| Brand | Kellys |
| Model | Ride |
| Dimensions | 48 x 36 x 18 mm |
| Weight | 25 g |
| Display Type | LCD |
| Power Source | 1 x CR2032 battery |
| Battery Life | Approx. 12 months |
| Speed Measurement | Current, average, max speed |
| Distance Measurement | Trip distance, total distance |
| Time Functions | Clock, ride time |
| Odometer | Yes, with manual reset |
| Water Resistance | IPX4 splash proof |
| Mounting Type | Handlebar or stem bracket |
| Sensor Type | Wired / wireless (depending on variant) |
| Wheel Size Setting | Manual input in millimeters |
| Data Retention | Yes, during battery change |
| Backlight | No (standard) |
| Maintenance | Wipe with a dry cloth; avoid solvents |
| Safety | Do not look at display while riding |
| Spare Parts | Battery, mounting bracket, sensor |
| Repairability | Battery replacement by user |
| Warranty | 2 years from purchase |
| Compliance | CE, RoHS |
Frequently Asked Questions - Ride Kellys
How to install the Kellys Ride bike computer?
Attach the mounting bracket to your handlebar or stem using the rubber bands. Place the computer onto the bracket and secure it. Install the sensor on the fork and magnet on a spoke, then connect the wire if wired.
How to set the wheel size?
Measure your wheel circumference in millimeters (e.g., 2100 for a 700c wheel). Press and hold the SET button until the display flashes, then use the MODE button to adjust digits. Confirm by pressing SET again.
How to reset the trip distance?
Press and hold the MODE button for 3 seconds while the trip distance is displayed. The trip distance will reset to zero. The odometer cannot be reset.
Why does my bike computer not show speed?
Check that the sensor and magnet are aligned (1-3 mm gap) and that the battery is properly installed. Also ensure the wheel size is set correctly. If wireless, check pairing.
How to replace the battery?
Remove the computer from the bracket. Use a coin to twist the battery cover open. Replace the CR2032 battery with the positive side facing up. Close the cover and reattach.
Is the Kellys Ride waterproof?
The device is IPX4 rated, meaning it is splash-proof. It can withstand rain and splashes but should not be submerged or exposed to high-pressure water.
What functions does the display show?
The display cycles through: current speed, average speed, maximum speed, trip distance, total distance, ride time, clock, and odometer. Use the MODE button to toggle.
How to switch between km/h and mph?
During setup, while setting wheel size, you can toggle the unit by pressing the MODE button. The default is km/h. Confirm with SET.
Can I use this computer on multiple bikes?
Yes, you can purchase additional mounting brackets and sensors for other bikes. The computer unit itself is transferable. Remember to set the wheel size for each bike.
What to do if the display is dim or missing segments?
First, try a new battery. If the issue persists, check for moisture inside the case or loose connections. Avoid exposure to extreme temperatures. Contact Kellys support if needed.
User questions about Ride Kellys
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bike computer in PDF format for free! Find your manual Ride - Kellys and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ride by Kellys.