P10 - Flashlight Nitecore - Free user manual and instructions

Product Type	Tactical Flashlight
Brand	Nitecore
Model	P10
Dimensions	135 mm (length) × 25.4 mm (body diameter)
Weight	102 g (including battery)
Power Source	One 18650 rechargeable Li-ion battery or two CR123A primary cells
Max Output	900 lumens
Max Beam Distance	180 meters
Max Runtime	30 hours (on low mode)
Operating Modes	Turbo, High, Mid, Low, Strobe, SOS
Switch	Tail cap tactical switch (momentary and constant-on)
Lens	Glass with anti-reflective coating
Reflector	Aluminum reflector
Body Material	Aerospace-grade aluminum alloy
Finish	HAIII military grade hard anodized
Waterproof Rating	IPX8 (submersible up to 2 meters)
Impact Resistance	1.5 meters
Battery Indicator	Red light on tail cap indicates low battery
Clip	Stainless steel pocket clip
Lanyard Hole	Yes, on tail cap
Maintenance	Clean threads and contacts with alcohol; lubricate O-rings with silicone grease
Safety Features	Reverse polarity protection, over-discharge protection
Spare Parts	Replacement O-rings, tail cap switch, rubber boot
Repairability	User-serviceable: battery, O-rings, tail cap switch; LED unit not field-repairable
Warranty	5 years

Frequently Asked Questions - P10 Nitecore

How do I change the battery in the Nitecore P10?

Unscrew the tail cap, remove the old battery, and insert a new 18650 or two CR123A cells with the positive (+) side towards the head. Screw the tail cap back on securely.

Is the Nitecore P10 waterproof?

Yes, the P10 has an IPX8 rating, meaning it can be submerged up to 2 meters deep for 30 minutes.

How do I charge the flashlight if it uses an 18650 battery?

Remove the 18650 battery and charge it in an external Li-ion charger. The flashlight does not support USB charging.

What are the brightness modes and how do I switch between them?

The P10 has five brightness levels: Turbo (900 lm), High (500 lm), Mid (200 lm), Low (45 lm), and also Strobe and SOS. Rapidly press the tail switch to cycle through modes.

How do I activate the strobe mode?

While the light is on, quickly press the tail switch twice in succession to enter strobe mode. Press again to return to constant on.

Can I use rechargeable batteries other than 18650?

The flashlight is designed for 18650 or CR123A batteries. Using other chemistries may damage the light or pose a safety risk.

Does the Nitecore P10 have a lockout function?

There is no electronic lockout, but you can loosen the tail cap quarter turn to physically disconnect the battery and prevent accidental activation.

What is the maximum beam distance?

The Nitecore P10 has a maximum beam distance of 180 meters (ANSI FL1 standard).

How do I clean and maintain the flashlight?

Periodically clean the threads and contact points with isopropyl alcohol and apply a light coat of silicone grease to the O-rings to maintain waterproof integrity.

What is the warranty for the Nitecore P10?

Nitecore offers a 5-year limited warranty against defects in materials and workmanship. Batteries and accessories are not covered.

USER MANUAL P10 Nitecore

开启/关闭