1183i - Sewing machine Dürkopp Adler - Free user manual and instructions
Find the device manual for free 1183i Dürkopp Adler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Sewing Machine |
| Brand | Dürkopp Adler |
| Model | 1183i |
| Dimensions (W x D x H) | 55 x 30 x 50 cm |
| Weight | 28 kg |
| Power Supply | 230 V, 50/60 Hz |
| Power Consumption | 400 W |
| Stitch Type | Lockstitch |
| Maximum Sewing Speed | 5500 stitches/min |
| Needle System | DBx1 |
| Needle Size Range | Nm 90 to Nm 110 |
| Stitch Length Range | 0-9 mm |
| Lubrication | Automatic oiling system |
| Presser Foot Lift | Knee-operated |
| Thread Trimmer | Automatic |
| Maintenance | Daily clean bobbin area; oil weekly |
| Safety Features | Emergency stop, finger guard |
| Spare Parts Availability | Widely available through Dürkopp Adler dealers |
| Repairability | Modular design; technician service recommended |
| Documentation | 35-page user manual (PDF) |
Frequently Asked Questions - 1183i Dürkopp Adler
How do I thread the Dürkopp Adler 1183i?
Follow the numbered thread path diagram in the manual. Ensure the thread passes through the tension discs and check spring, then through the needle eye from front to back.
What oil should I use for lubrication?
Use only Dürkopp Adler approved sewing machine oil (ISO VG 15 or equivalent). Do not use substitutes as they may damage the automatic lubrication system.
How do I adjust the stitch length?
Rotate the stitch length regulator knob on the arm of the machine. Turn clockwise for shorter stitches, counterclockwise for longer. The range is 0 to 9 mm.
Why is the machine skipping stitches?
Check the needle for bending or dullness. Ensure the needle is fully inserted and the needle size matches the thread. Also verify tension settings and timing.
How do I clean the bobbin area?
Open the slide plate, remove the bobbin case, and use a brush to remove lint and debris. Clean the feed dogs and shuttle race. Do not use compressed air as it can push lint deeper.
What needle system does the 1183i use?
It uses DBx1 needles (also known as 134 or 16x231). Standard sizes range from Nm 90 to Nm 110 depending on fabric.
How do I replace the bobbin winder?
The bobbin winder is located on the top of the arm. Engage it by pushing the winding lever. If it fails to wind, check the tension disc and the rubber tire on the winder.
The machine is noisy. What could be wrong?
Noise may indicate insufficient oiling, worn bearings, or debris in the hook assembly. First, ensure the machine is properly oiled. If noise persists, consult a technician.
Can I sew leather with the 1183i?
Yes, the 1183i can sew light to medium leather. Use a leather needle (e.g., DBx1 size 110) and adjust presser foot pressure and stitch length accordingly.
Where can I get spare parts?
Spare parts are available from authorized Dürkopp Adler dealers or online. Common parts like needles, bobbins, and bobbin cases are widely stocked.
User questions about 1183i Dürkopp Adler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual 1183i - Dürkopp Adler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1183i by Dürkopp Adler.