BRUTUS BE35-800.4 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free BRUTUS BE35-800.4 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Car Amplifier |
| Model | BRUTUS BE35-800.4 |
| Brand | Hifonics |
| Number of Channels | 4 |
| RMS Power (4 ohms) | 100W x 4 |
| RMS Power (2 ohms) | 150W x 4 |
| Bridged Power (4 ohms) | 300W x 2 |
| Frequency Response | 10 Hz - 30 kHz |
| Total Harmonic Distortion (THD) | <0.01% |
| Signal-to-Noise Ratio (SNR) | >100 dB |
| Input Sensitivity | 200 mV - 6V |
| Low-Pass Filter | Variable 40 Hz - 400 Hz |
| High-Pass Filter | Variable 15 Hz - 4 kHz |
| Bass Boost | 0-18 dB |
| Speaker-Level Inputs | Yes |
| Power Supply | 12V DC (10-16V) |
| Fuse Rating | 30A x 2 |
| Dimensions (LxWxH) | 12.6 x 2.2 x 6.5 in |
| Weight | 5.5 lbs |
| Heat Sink | Aluminum finned |
| Protection Circuitry | Short circuit, thermal, over voltage |
| Mounting | Included hardware |
| Maintenance | Clean with dry cloth |
| Spare Parts | Replaceable fuses |
| Repairability | User-serviceable fuses, professional repair recommended |
Frequently Asked Questions - BRUTUS BE35-800.4 Hifonics
What is the RMS power output per channel at 4 ohms?
The Hifonics BRUTUS BE35-800.4 delivers 100 watts RMS per channel at 4 ohms.
Can I bridge two channels for more power?
Yes, bridging channels 1&2 and 3&4 yields 300 watts RMS at 4 ohms per bridged pair.
What size fuse does the amplifier use?
It uses two 30 amp ATO/ATC fuses.
Does this amplifier have high-level (speaker-level) inputs?
Yes, it includes speaker-level inputs for connection to factory head units.
What is the recommended power wire gauge?
For optimal performance, use 4 AWG power and ground wire.
How do I adjust the crossover settings?
Use the variable low-pass and high-pass filters with a screwdriver to set desired frequencies.
Is the amplifier stable at 1 ohm?
No, the BRUTUS BE35-800.4 is not 1 ohm stable. Minimum impedance for stereo is 2 ohms, bridged is 4 ohms.
What is the total harmonic distortion (THD) rating?
The THD is rated at <0.01% for clean sound.
Does it come with a remote bass knob?
No, a remote bass knob is not included, but it has a variable bass boost on the amplifier itself.
How do I clean and maintain the amplifier?
Use a dry, soft cloth to wipe the exterior. Avoid liquids. Ensure proper airflow to prevent overheating.
User questions about BRUTUS BE35-800.4 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual BRUTUS BE35-800.4 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRUTUS BE35-800.4 by Hifonics.