Smart App Online OL10KRT3UHW - Inverter CyberPower - Free user manual and instructions
Find the device manual for free Smart App Online OL10KRT3UHW CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Online Double Conversion UPS |
| Model | Smart App Online OL10KRT3UHW |
| Power Capacity | 10 kVA / 9 kW |
| Form Factor | Rack/Tower Convertible (3U) |
| Dimensions (W x D x H) | 432 x 660 x 133 mm (17.0 x 26.0 x 5.2 in) |
| Weight | 39 kg (86 lbs) |
| Input Voltage | 208/220/230/240 V AC (3-phase, 4-wire) |
| Output Voltage | 208/220/230/240 V AC (single-phase selectable) |
| Output Waveform | Pure Sine Wave |
| Transfer Time | 0 ms (online mode) |
| Battery Type | Sealed Lead-Acid (maintenance-free) |
| Battery Quantity | 16 x 12V / 9Ah (internal) |
| Typical Runtime (at 50% load) | Approx. 10-15 minutes |
| Interface Ports | RS-232, USB, EPO, SNMP slot |
| Display | LCD panel with status indicators |
| Software Compatibility | PowerPanel® Business Edition |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Safety Approvals | UL, cUL, FCC Class A |
| Maintenance | Periodic battery check; clean vents with dry cloth |
| Repairability | Hot-swappable batteries; user replaceable fans |
Frequently Asked Questions - Smart App Online OL10KRT3UHW CyberPower
What is the difference between online and standby UPS?
An online UPS (double conversion) continuously converts AC to DC and back to AC, providing zero transfer time and complete isolation from power anomalies. A standby UPS switches to battery only when input power fails, causing a brief transfer time.
How do I connect the UPS to my network?
Use the included USB or RS-232 cable, or install an optional SNMP card in the expansion slot. Install PowerPanel Business Edition software for monitoring and management.
What does the LCD display show?
The LCD shows input/output voltage, load level, battery status, and alarms. Use the navigation buttons to cycle through screens.
How do I replace the batteries?
The UPS has hot-swappable internal batteries. Remove the front bezel, disconnect the battery connector, slide out the old battery pack, and insert a new one. Ensure the UPS is on bypass or turned off if not hot-swapping.
What is the typical runtime at full load?
At 10 kVA (9 kW) full load, runtime is approximately 3-5 minutes. Adding external battery cabinets (EBM) can extend runtime.
Can I mount this UPS in a rack?
Yes, the OL10KRT3UHW is designed for 3U rackmount installation. Included rackmount ears allow horizontal mounting. It can also be used as a tower with optional stand.
What types of power problems does this UPS protect against?
It protects against power surges, sags, brownouts, blackouts, frequency variations, and harmonic distortion due to its online double conversion design.
How do I perform a self-test?
Press the TEST button on the front panel momentarily. The UPS will switch to battery for a few seconds, testing battery capacity and inverter performance. The LCD will show results.
What should I do if the UPS beeps continuously?
Continuous beeping usually indicates a battery low or overload. Check the LCD for an alarm code. Reduce connected load or replace batteries if necessary.
Is the UPS compatible with generators?
Yes, but the generator output should be stable and within the input voltage/frequency tolerance. CyberPower recommends generators with pure sine wave output for best performance.
User questions about Smart App Online OL10KRT3UHW CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual Smart App Online OL10KRT3UHW - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart App Online OL10KRT3UHW by CyberPower.