Q3 Pro Special - Phone Realme - Free user manual and instructions

Product Type	Smartphone
Brand	Realme
Model	Q3 Pro Special
Dimensions	158.5 x 73.3 x 8.4 mm
Weight	179 g
Battery Capacity	4500 mAh
Charging	30W fast charging
Display	6.43 inch Super AMOLED, 120Hz refresh rate
Processor	MediaTek Dimensity 1100
Rear Camera	64 MP (main) + 8 MP (ultrawide) + 2 MP (macro)
Front Camera	16 MP
Operating System	Android 11, Realme UI 2.0
Connectivity	5G, Wi-Fi 6, Bluetooth 5.2, NFC
Security	Side-mounted fingerprint sensor, face unlock
SIM	Dual SIM (Nano-SIM, dual stand-by)
Ports	USB Type-C, 3.5mm headphone jack
Memory	8 GB RAM, 128/256 GB storage
Maintenance	Clean with a soft, dry cloth; avoid exposure to liquids
Repairability	Battery and screen replaceable by authorized service centers
Release Year	2021

Frequently Asked Questions - Q3 Pro Special Realme

Does the Realme Q3 Pro Special support 5G?

Yes, the Realme Q3 Pro Special supports 5G connectivity, enabling faster data speeds and lower latency.

What is the battery capacity and charging speed?

It has a 4500 mAh battery and supports 30W fast charging, which can charge from 0 to 100% in about 65 minutes.

How do I take a screenshot on the Realme Q3 Pro Special?

Press and hold the Power button and Volume Down button simultaneously for a few seconds.

Is the Realme Q3 Pro Special water-resistant?

No, the phone does not have an official IP rating for water or dust resistance. Avoid exposure to liquids.

Does it have a headphone jack?

Yes, the Realme Q3 Pro Special includes a 3.5mm headphone jack for wired audio.

Can I expand the storage?

No, the phone does not have a microSD card slot. Storage is fixed at 128GB or 256GB.

What kind of SIM card does it use?

It uses dual Nano-SIM cards, both supporting 5G standby.

How do I enable dark mode?

Go to Settings > Display & Brightness > Dark Mode and toggle it on.

Does the phone have NFC for contactless payments?

Yes, it supports NFC, allowing you to use Google Pay and other contactless payment services.

What is the refresh rate of the display?

The display has a 120Hz refresh rate for smoother scrolling and animations.

USER MANUAL Q3 Pro Special Realme

SEAMLESS FUN FOR GEN Z realme ui 2.0 Based on Android 11

realme UI 2.0 User Guide

Here is everything you need to know about realme UI 2.0.

Creativity is everywhere and for everyone. When inspiration strikes, you can unleash that creativity by customizing your own Always-On Display.

It only takes a few swipes for you to create a new design or add some personal touches to the text style and layout in our templates.

The seamless experience of efficiency is taken to a new level, from switching between apps, convenient sharing to hassle-free translation.

Relieve your worries while using your phone with enhanced smoothness, efficient battery durability, and upgraded privacy protection.

realme UI 2.0, seamless fun.

The demonstrated contents (including but not limited to UI, wallpapers) are only references. The features may vary by different models and regions. Please refer to the actual product.

Contents

Communication and Network....19

SIM Card Settings....19

Wi-Fi....20

Wi-Fi Connection....20

Enhance Internet Experience....22

Dual-Wi-Fi Speed-Up....24

Apps Using Wi-Fi and Mobile Data....25

Connection & sharing....26

VPN....26

Tethering....27

NFC 29

Wireless Transport....29

Wake the Phone....30

Press Power Button....30

Use Raise to Wake....31

Unlock the Phone....31

Passcode 31

Fingerprint....32

Enroll Face 33

Navigation....35

Swipe Gestures from Both Sides....35

Virtual Keys ....37

Swipe-Up Gestures....38

Adjust and Control the Volume 40

Volume Control Buttons....40

Customize the Ringtones....42

Silent Mode....42

More Options for Ringtone Customizaton....43

Dolby Atmos....44

Adjust Screen Brightness....45

Screen Color Temperature Adjustment....46

Switch on Eye-Protection Mode 46

Eye Care 47

Low-Brightness Flicker-Free Eye Care....47

Dark Mode, Delivering a Comfortable Experience All Day Long....48

Enabling Dark Mode....48

Setting Dark Mode to Start at a Specific Time....49

Changing the Wallpaper as Desired....50

Changing the Wallpaper 50

Choosing a Photo from Photos as the Wallpaper 51

Always-On-Display....52

Auto Screen Off....52

Auto Rotate....53

Full-Screen Display....54

Airplane Mode....54

Data Manager....55

Mobile Data Usage....55

Data Saving....55

Contacts....57

Create New Contacts Manually ....57

Import Contacts....58

Name Cards Scan....59

Manage Contacts....59

All Call Logs 61

My Groups....62

Do Not Disturb....63

Turn on "Do Not Disturb"......63

Customize "Do Not Disturb"......64

Allowed Content 65

Convenient Features....66

Search Settings....66

Font....67

Convenience tools....68

Awake Google Assistant....68

Assistive Ball....68

Screen-off Gestures....71

Smart Sidebar 72

Quick tools....73

Quick Apps....73

3-Finger Translate Powered by Google Lens....74

FlexDrop....75

Nearby Share 77

Screenshot 78

Button Screenshot....78

3-Finger Screenshot....78

Assistive Ball Screenshot....78

Smart Sidebar Screenshot....79

Long Screenshot 79

Sharing a Screenshot....79

Split-Screen 80

Split-Screen Adjustment 81

Adjust Split-Screen Location 81

Exit Split-Screen 82

App Cloner....82

Power Saver....84

Save Power....84

Power Usage....85

Power Saver Options....85

High Performance Mode....85

Super Power SavingMode....86

Battery Guard....88

Low Battery Message....88

Control Center 89

Change or Rearrange Icons....89

Quick Actions....90

Notification Bar 92

See Recent and Earlier Notifications....93

Remind Me Later....93

Set Notification Preference....93

Status Bar 95

Create App Shortcuts....96

Keyboards and Input Methods....97

Customize Keyboard Settings....98

Type Emojis and Stickers....98

Voice Typing....99

Autofill Service....99

realme Share 100

Search Settings, Data, and Files 101

Multiple users, one phone 103

Accessibility 104

TalkBack 105

Accessibility Menu....106

Select to Speak....106

Switch Access....108

Text-to-Speech (TTS) Output 109

Accessibility Shortcuts 109

Subtitles....110

Clean Storage....110

Back Up Your Phone....113

Use HeyTap Cloud....113

Manual Syncing....115

Charge the Battery....117

Restart or Turn Off Your Phone....118

Print right from your smartphone....119

Print documents....119

Print photos....121

Manage all your emails in one place....124

Sign in to your email account....124

Manage accounts and emails....125

Take notes with Text scanner anytime, anywhere.... 127

Take photos....128

Enhance photos....129

Customizable Color Schemes....131

Customizable Always-On Display....132

Customizable Dark Mode....133

Privacy and Security....134

Manage the Information and Permission....134

Personal Information Protection....134

Manage App Permissions....135

Emergency SOS....136

Turn On Emergency SOS: 137

Emergency Numbers: 137

Initiate an SOS Emergency Call.... 138

Send SOS Message 138

Privacy Password....139

Set Privacy Passcode 139

Modify Privacy Password 139

Reset Privacy Passcode....140

Turn off Privacy Passcode....140

App Lock....141

Turn on App Lock 141

Access Encrypted Apps....142

Turn off App Lock....143

Hide Home Screen Icons....144

Access-Hidden Apps....144

Payment Protection....145

Harassment and Fraud Prevention.... 145

Block Calls....146

Block Messages....146

Blacklist....147

Whitelist....147

Kid Space....148

Private Safe....149

Add Files....149

Access to Private Files 150

Private System....150

One-tap App Lock....152

Add Private Safe to Desktop....153

Tools & Applications....153

Application Basis....153

Download and Install Apps....153

Move and Organize Apps....155

Delete Apps....157

Clock....157

Alarm Clock....157

Set Vibration of a Specific Alarm 159

Weather-Adaptive Alarm....159

World Clock 160

Stopwatch....163

Timer 164

Weather 166

Authorization to Acquire Location Information.... 166

View Current Weather and Weather Forecast.... 167

View Weather in Multi-Cities....168

Calculator 168

Numeric Calculation ...... 169

Online Exchange Rate Conversion.... 170

More Unit Conversion.... 170

Compass....171

Calibrate Compass....171

View the Direction of Where Your Phone is Pointing at 171

Phone Calls 172

Make a Call....172

Manage Incoming Calls....173

Multi-Operations During a Call 175

Call Recording....176

Identification of Unknown Numbers 178

Messages....179

Send and Receive SMS 179

Send Pictures, Videos, and Audios....180

Delete and Block Messages....184

Browser 184

Browse the Web 184

Browse Tabs....186

Search 187

AD Blocking....188

Private Browsing 188

File Manager....189

Quick File Sorting....189

Folder Manager....189

Set as Private....191

Phone Manager....191

Examine and Optimize.... 192

Clear Up Storage....192

Privacy Permissions....193

Virus Scan....194

Payment Protection 195

Theme Store....197

Purchase / Download Resources.... 197

Set the Theme....198

Set Wallpaper....199

App Market....200

Banner....201

Games....201

Apps....201

Top 202

My Information....202

Recorder 202

Standard Recording 203

Meeting/Interview Recording 203

Audio Manager....204

Mark Recording....204

Screen Recording 205

Start Screen Recording 205

Screen Recording Settings 206

One-Handed Mode....207

Focus Mode....207

Entering Focus Mode 208

Setting the Focus Period....208

Selecting the Focus Atmosphere 208

Customizing Focus Schemes 209

Viewing Focus Statistics 209

Incoming Call Alerts....210

Screen-Off Timer....210

Clone Phone....211

ORoaming 213

Make your Shots Outstanding....215

Learn How to Capture the Best Shots....215

Take Photos....215

Adjust Brightness....215

Zoom in or out....216

Turn the Flash on/off....216

Portrait mode....216

AI Beautification....217

Night Mode....218

Dazzle Color Mode 220

Expert Mode....220

Take Photos with Filters....222

Take a Panorama Photo....222

HDR 224

Watermark 224

Gesture to Take Photo....226

Shoot Video....226

Video Bokeh 227

SLO-MO Video 228

TIME-LAPSE Video 229

Editing a Video....230

Trim a Video 230

Speed Changing....230

Camera Settings....231

Photos....232

Photos....232

Optimize Storage....237

Search Photos 238

Using Soloop to Create Vlogs....238

Game Experience....249

Hyper Boost....249

Game Space....250

Hide Games Icons on Home Screen....250

Game Mode Settings....251

Smart Dual-Channel Network Optimization 252

Locking Brightness During Gaming....252

Game Assistant 253

Flip the Switch....253

Blocking Calls and Notifications....253

Answer Calls in Banner Notice 254

Decline Incoming Calls 254

Screen Capture 254

Floating Window Chat 254

Capturing Game Moments....255

Gamer Mode 255

Restart, Update, Back Up, Restore & HeyTap Cloud 256

Restart 256

Power on/off....256

Restart the Phone 257

Software Updates....257

OTA Online Update....257

Local Update....258

Back up....258

Back Up to Phone Storage 258

Back Up to HeyTap Cloud....259

Restore 260

App Optimization....261

App Cleaner....261

Smart System Management 262

Smart Memory Compression....262

HeyTap Cloud 262

Activate HeyTap Cloud 262

Manage Cloud Storage....264

Purchase More Cloud Storage 264

Contacts Time Machine....265

realme Lab 265

Dual Earphones 266

DC dimming....266

Super standby....267

Sleep Capsule 267

Support & Service 268

Contact realme Support 268

Get Help and Explore....268

Communication and

Network

SIM Card Settings

If your realme smartphone supports Dual SIM, the card tray both is Nano-SIM.

In Dual SIM mode, you can set a default SIM card for dialing, or manually select one when dialing. You can also set a SIM card for cellular networks.

19:30 SIM Card & Cellular Data SIM INFO & SETTINGS No SIM Card Insert a SIM card. No SIM Card Insert a SIM card. GENERAL SETTINGS Cellular Data DEFAULT CARD SETTINGS Calling More > Cellular Data More > Data Usage > ORoaming Purchasing an international data package lets you access the Internet without a SIM card. (Technical support provided by Redtea Mobile.) Not Enabled

You can rename two SIM cards and modify the network settings

19:30 ← SIM Info & Settings Enable SIM CARD INFO SIM Card Name SIM1 SIM Card Number Not set NETWORK SETTINGS Data Roaming Preferred Network Type 4G/3G/2G (Auto) Access Point Name Carrier CU

Wi-Fi

Wi-Fi Connection

Go to "Settings" > "Wi-Fi", enable Wi-Fi.

Detected Wi-Fi networks will be displayed.

10:08 ← Wi-Fi Wi-Fi realme Dual Wi-Fi Acceleration on Wi-Fi NETWORKS Wi-Fi SETTINGS Dual Wi-Fi acceleration Connect to two Wi-Fi networks at the same time to speed up your Internet connection On Advanced settings

- Wi-Fi Without Password

If you want to connect to Wi-Fi without a password, tap the network directly.

- Password-Required Wi-Fi

Tap the network and enter the password if required.

- Manually Add a Network

If you cannot find the network that you intend to connect, enter both the network name and password after you click the option "Manually Add a Network".

Once the device is successfully connected to a network, whenever the network is available, the device will connect to the network without having to re-enter the password.

If you do not want to connect to a network automatically, tap to remove the connected network.

You can view the "Saved Networks" in "Advanced Settings".

Enhance Internet Experience

What if the Wi-Fi signal is unstable?

- Wi-Fi Assistant

Go to "Settings" > "Wi-Fi" > "advanced setting" > "Wi-Fi Assistant"

Enable "Automatically Select the Best Wi-Fi", the phone will connect to the best Wi-Fi network by detecting and analyzing the quality of all Wi-Fi signals.

You can also activate "Auto-switch to Cellular Network". When all Wi-Fi networks are of poor quality while the cellular data is on, the phone will switch to the cellular network automatically.

- Dual Channel Network Acceleration

When "Dual Wi-Fi Acceleration" is turned on, network speed will be intelligently accelerated when cellular data and Wi-Fi are used concurrently. Then you can enjoy a smoother Internet connection.

Apps for network acceleration are displayed below.

10:00 ← Dual channel acceleration Dual channel acceleration 1. Use Wi-Fi and mobile data concurrently for a smoother Internet experience. 2. This feature may still incur additional data charges even if you have unlimited data for certain apps. APPS THAT SUPPORT NETWORK ACCELERATION Browser

Dual-Wi-Fi Speed-Up

After turning on Dual-Wi-Fi mode, two Wi-Fi networks will be connected at the same time, and network connection acceleration and seamless switching will be realized.

Turn on Dual-Wi-Fi Mode

Go to "Settings" > "Wi-Fi" > "Wi-Fi settings" > Enable "Dual-Wi-Fi Speed-Up".

Notes:

2 Wi-Fi hot spots. One is 2.4 Ghz, the other is 5 Ghz. No mutual disturbance
lies between them and each hot spot can receive and send data independently.
2 hot spots can be named either the same or differently.
2 hot spots can share the same router or be supported by different routers.
(Only some phones support this feature)

Apps Using Wi-Fi and Mobile Data

You can customize network permission settings for each app in "Wi-Fi and Mobile Data", "Wi-Fi" or "Close". You can also view the total traffic used by each app.

Go to "Settings" > "SIM Card & mobile data" > "Data Usage" > "Network Permissions".

19:30 Network Permissions App Market Wi-Fi & Cellular Data Browser Wi-Fi & Cellular Data Chrome Wi-Fi & Cellular Data Dailyhunt Wi-Fi & Cellular Data DocVault Wi-Fi & Cellular Data Drive Wi-Fi & Cellular Data Facebook Wi-Fi & Cellular Data Game Center Wi-Fi & Cellular Data Game Space Wi-Fi & Cellular Data Gmail Wi-Fi & Cellular Data

Connection & sharing

VPN

VPN is a professional network communication device, extending a private network across a public network. VPN enables users to send and receive data across shared or public networks as if their computing devices were directly connected to the private network.

Add VPN

Go to "Settings" > "Connection & sharing" > "VPN" > .Enter the name, VPN type, server address and more information to add a VPN.

19:30 Cancel Add VPN Save Name Request VPN Type PPTP Server Address Required PPP Encryption (MPPE) DNS Search Domains DNS Server Forwarding Route 10.0.0409 Q W E R T Y U I O P A S D F G H J K L Z X C V B N M ?123

Tethering

You can share your network in the following four ways.

- Personal Hotspot

Go to "Settings" > "Connection & sharing" > "Personal Hotspot".

Use a personal hotspot to share your Wi-Fi or mobile network connection. It should be noted that more data and power may be consumed. Personal Hotspot will automatically turn off after 10 minutes when no device is connected.

Enter "Personal Hotspot Settings" to set the name and password for your personal hotspot.

You can also set blacklist, maximum connected devices, and data restriction in "Connection Management".

Other Devices Connect to Your Hotspot

• Search the name of your hotspot.
• Enter the password as prompted to connect.

Note: Up to 10 devices can connect to your hotspot at the same time. Wi-Fi

Tethering cannot be used simultaneously with realme Share, Wi-Fi Direct,

Multi-screen Interaction, and other functions.

USB Tethering

Connect your phone to the computer with a data cable. Go to "Settings" > "Connection & sharing".

Turn on "USB Tethering", the computer will automatically recognize and share your Internet connection.

Bluetooth Tethering

When the pairing is done. Go to "Settings" > "Connection & sharing" > "Bluetooth Tethering".

Another device should turn on the Bluetooth and tap the name of your Bluetooth to share your Internet connection.

To turn off Bluetooth Tethering. Go to "Settings" > "Connection & sharing" > "Bluetooth Tethering".

Or, you can tap "Unpair" to disconnect Bluetooth and stop sharing your Internet connection.

NFC

Go to "Settings" > "Connection & sharing" > "NFC".

When "NFC" is on, the phone is allowed to exchange data with any device in close proximity.

You can also use "Tap & Pay" and "Android Beam". Your phone is allowed to make a payment or transfer data via NFC.

Wireless Transport

- Wi-Fi Direct

Through "Wi-Fi Direct", you can transfer data swiftly to peer devices when connecting to the same wireless network.

- Screencast

Go to "Settings" > "Connection & sharing" > "Screencast".

Your phone's display can be paired in real time with a display device after enabling wireless display on the display device.

• DLNA

When "DLNA" is enabled, the phone will automatically search for the DLNA device in the same Wi-Fi wireless network, and then project the phone screen to the target device.

Wake the Phone

There are multiple ways to wake your phone.

Press Power Button

Press the Power Button on the right side to wake the phone.

Power Button

Use Raise to Wake

Enable "Raise to Turn On Screen". When you raise your phone to look at it, it will automatically wake the locked screen.

Go to "Settings" > "Convenience tools" > "Gesture & Motions", enable "Raise to Wake".

Unlock the Phone

For safety consideration, you can set diverse ways to unlock your phone, including passcode, fingerprint, and facial recognition. You can use more than one method to unlock your phone.

Passcode

You can set a 6-digit numeric code to unlock your phone. After waking the phone, slide the phone and enter the passcode.

Go to "Settings" > "Fingerprint, Face & Password" > "Lock Screen Password".

Your lock screen password is used to unlock your phone. If you forget it, you must reset it by restoring your phone to factory defaults, which will erase all data on your phone.

Fingerprint

You can also unlock the phone through fingerprint. Follow the onscreen instructions the first time you set up your fingerprint passcode. You can add up to five different fingerprints.

Go to "Settings" > "Fingerprint, Face & Password" > "Fingerprint" > "Add a Fingerprint".

Tap "Animation Style", you can choose the animation style of fingerprint you like.

If you want to show Fingerprint Icon when sreen-off, tap "Screen-Off Unlock" to set it.

19:30 Cancel Add a Fingerprint Place your finger on the Fingerprint button and press the screen slightly. Do not use different fingers in one fingerprint enrollment.

Enroll Face

You can also unlock your phone within only 0.08 seconds with a simple glance at the phone.

To use Face enrollment, you should set up the facial-recognizing passcode on your phone.

Go to "Settings" > "Fingerprint, Face & Password" > "Add Face" > "Enroll Face".

19:30 Cancel Enroll Facial Info For the best results, keep the device 20cm to 50 cm from your face and avoid surroundings that are too bright or too dim when enrolling Continue Facial info is stored in the security module of this phone and cannot be obtained by the system or apps.

Remember to follow the onscreen instructions by enrolling your face to acquire the best results.

Look straight to the screen. Keep the phone 20-50 cm away from your face and position your entire face in the circle until the enrollment is finished.

Avoid exposing your face to the bright or dim environment.

You are advised to turn on Raise to Turn on Screen, to better identify your face.

There are two ways to unlock while using face enrollment:

• Swipe up to unlock
• Wait for the automatic unlock if the screen light is on.

Tip: You can further protect personal security if you set your phone as inaccessible to be unlocked when your eyes are closed.

Navigation

Tap "Settings"-"Convenience tools"-"Navigation", there are three types of navigational gestures, including Swipe Gestures from Both Sides, Virtual Keys, and Swipe-Up gestures.

Swipe Gestures from Both Sides

- Back

Swipe inward from the bottom left or the bottom right of the screen.

● Back to Home screen

Swipe upward from the bottom of the screen.

• View Recent Tasks

Swipe upward from the bottom of the screen and then hold.

- Switch to Previous App

Swipe inward from the bottom left or the bottom right of the screen and then hold.

You can also enable "Mistouch Prevention for Swipe Gestures from Both

Sides". When using the full screen in landscape mode, gestures need 2 swipes to take effect.

11:05 Navigation Swipe gestures from both sides Virtual buttons More Back Swipe inward from the bottom left or the bottom right of screen Pull Down to Enter One-Handed Mode When the phone is in the portrait orientation, pull down from the bottom of the screen to enter One-Handed Mode. Hide gesture guide bar

Virtual Keys

Virtual Keys show up at the bottom of the screen once enabled. You can also customize the layout, or choose to hide Virtual Keys according to your daily usage habits.

Android P Navigation Keys consist of navigation shortcuts. Switch between different pages by easily swiping, dragging or tapping.

• Multi-Tasks: Swipe the middle button up
• Switch Between Apps: Slide the middle button left or right.
• Go to the Home screen: Tap the middle button.
• Awake Google Assistant: Press and hold the middle button.
  ● Back to Previous Page: Tap the back button.

Go to "Settings" > "Convenience tools" > "Navigation" > "Virtual buttons".

11:06 Navigation Swipe gestures from both sides Virtual buttons More Pull Down to Enter One-Handed Mode When the phone is in the portrait orientation, pull down from the bottom of the screen to enter One-Handed Mode. PREFERRED BUTTON LAYOUT

Swipe-Up Gestures

Tap "More", you can enable "Swipe-up" Gestures". With the help of Swipe-Up Gestures, it will be easier to operate your phone with a larger display and more immersive user experience.

Swipe up to:

• Return to the previous page
• Go to the Home screen

- View recent tasks

You can also customize different gestures, such as:

• Simple gestures. Swipe up from the middle bottom to get to the Home screen, and swipe up from the middle bottom and pause 1 second to view recent tasks.
• Back on the right. Swipe up from the left bottom to view recent tasks, swipe up from the middle bottom to get to the Home screen, and swipe up from the right bottom to return to the upper page.
• Back on the left. Swipe up from the left bottom to return to the upper page, swipe up from the middle bottom to get to the Home screen, and swipe up from the right bottom to view recent tasks.

11:06 More Swipe-up gestures Swipe up to go back Swipe up to go to home screen Swipe up and hold to view record task Hide gesture guide bar Mistouch prevention for swipe-up gestures When using full screen in landscape mode (e.g. gaming), gestures in some apps need 2 swipes to take effect.

Adjust and Control the Volume

Keeping in line with our infinite design concept, we redesigned system sounds to make them simple but refined. The new sounds are more mellow and are designed to evoke pleasant feelings.

realme UI offers personalized volume adjusting and controlling solutions. You can set customized volume levels for different uses.

Volume Control Buttons

Use buttons on the left side of the phone to adjust the audio volume if you are listening to songs, movies, or other media.

If you want to adjust the volume for ringtones, alerts, and other sound effects, tap on the sidebar and slide the bar to adjust the volume.

19:50 21 57 Dec 3 14°C Calendar Photos Clock Settings App Market Theme Store Play Store Google

Click on the bottom to personalize volume for media, ringer, and alarm.

For example, you can turn off the volume for media and ringer and turn on the alarm before sleep, in order to ensure the best quality during your rest.

19:50 21 58 Tue, Dec 3 Clear 14°C Ringtone Clock Settings App Market Theme Store Play Store Google

Customize the Ringtones

realme UI enables the user to customize ringtones. You can set different

ringtones to identify incoming calls, messages, and calendar notifications. You

may also customize the ringtones by importing alert files on your phone or

from online sources.

Go to "Settings" > "Sound & Vibration".

Silent Mode

You can turn on the silent mode if you're not hearing or seeing incoming calls and alerts when you expect.

How to turn on the silent mode:

• Swipe down the screen from atop, go to Control Center, and tap "Mute".
• Tap on the volume button on the side of the phone, click at the

lower-left area of the volume button.

21:58 Clear 14°C Tue, Dec 3 Data used today: 327 KB. Daily limit: 1 GB.

More Options for Ringtone Customizaton

To provide better operational feedback, realme UI 2.0 offers four personalized ringtones settings.

Go to "Settings" > "Sound & Vibration" > "System Feedback".

• Dial-Pad Tone
• Touch Sounds
• Lock Screen Tone
• Vibrate on Touch
• Screenshot Sound
• Deletion Sound

● Fingerprint Animation Sound

Dolby Atmos

Dolby Atmos is activated by default, you can choose to turn it off when your device is connected to an earphone.

Besides Smart mode, there are Movie, Gaming and Music modes for you to choose according to use scenarios.

Go to "Settings" > "Sound & Vibration" > "Dolby Atmos".

19:30 Dolby Atmos Dolby Atmos Smart Automatically adapt sound effects to the feature being used Movie Real 30 surround sound and powerful bass Gaming Immersive experience with stunning bass Music Fuller and more balanced sound

Adjust Screen Brightness

You can adjust screen brightness under different lighting conditions to have a better visual display.

Adjust the screen brightness manually

• Swipe down from the top of the screen, enter Control Center and drag the slider.
• Go to "Settings" > "Display & Brightness", drag the slider.

Automatically adjust the screen brightness

After you turn on Auto-Brightness, realme UI 2.0 will adjust the screen brightness for current light conditions using the built-in ambient light sensor, to prevent eye fatigue and increased power consumption.

Swipe down from the top of the screen, enter Control Center and tap button on the right side of the brightness slider.

- Go to "Settings" > "Display & Brightness" > "Auto-Brightness".

Screen Color Temperature Adjustment

You can set the screen tone as either warm or cool.

Go to "Settings" > "Display & Brightness", set screen tone by dragging the slider.

Cool Default Warm ◯

Switch on Eye-Protection Mode

realme UI 2.0 makes it easier when you use the phone at night or under

dimming light. You can turn on the eyes-protective mode to reduce eye strain and fatigue when exposing to digital display for a long time.

There are two types of eyes-protective mode.

Eye Care

The Eye Care mode could help reduce the blue light emitted from the display to prevent eye fatigue. You can adjust the screen color temperature from cool to warm. You also can set the schedule time.

Low-Brightness Flicker-Free Eye Care

When Low-Brightness Flicker-Free Eye Care is turned on, eye fatigue will be much relieved as it is in the minimum brightness in dimly-lit environments. But the image noise may be slightly increased if you turn on the none-stroboscopic dim light mode.

Go to "Settings" > "realme Lab" > "DC dimming"

Dark Mode, Delivering a Comfortable Experience All Day Long

With automatic backlighting, your eyes will be comfortable no matter whether it is strong or dark, noon or night. In addition, we have also upgraded the color structure to improve the dark contrast, so that the page is well-defined, patchwork, and the key information is more prominent. In the dark mode, the power consumption of the screen is effectively reduced, and the power of the mobile phone is also comfortable.

Enabling Dark Mode

You can enable dark mode in two ways:

• Choose Settings > Display & Brightness, and enable Dark Mode.
• Go to the Control Center, and enable Dark Mode.

Setting Dark Mode to Start at a Specific Time

After dark mode has been enabled, you can choose to always use dark mode or set a start time as desired.

Choose Settings > Display & Brightness, enable Dark Mode, enable Auto switch, and set the “sunset to sunrise” or “Custom”.

Display & brightness 19:30 Light Dark Auto switch Switch to Light mode at sunrise Dark mode settings Style. Reduce contrast in low light conditions, and Dark mode for third-party apps Auto brightness Eye comfort Auto rotate Auto screen off

- Dark mode settings

You can set three different levels of dark styles: "Enhanced", "Medium" and "Gentle".

Adjust wallpapers to Dark mode.

Adjust icons to Dark mode.

Reduce contrast in low light conditions.

Changing the Wallpaper as Desired

You can change the wallpaper of your mobile phone as desired. realme UI 2.0 provides various brilliantly designed static wallpapers, live wallpapers, and interactive live wallpapers. You may also choose a photo from Photos as the wallpaper, making your phone beautiful both inside and out.

Changing the Wallpaper

• Choose Settings > Personalizations > Wallpaper.
• Choose your favorite wallpaper from Static Wallpapers or Live
  Wallpapers. You can enlarge the wallpaper using two fingers or move the wallpaper to adjust the location of the picture.
• You can set a static wallpaper as your Home Screen, Lock Screen,
  or Home Screen & Lock Screen, and a live wallpaper as Home
  Screen or Home Screen & Lock Screen.

23 15 Tue, Dec 3 Set as Lock Screen Wallpaper Set as Home Screen Wallpaper Set as Both Cancel

Choosing a Photo from Photos as the Wallpaper

Choose Settings > Home Screen and Lock Screen Magazine > Set Wallpaper.

Tap Photos and choose a photo. You can enlarge the photo using two fingers or move the photo to adjust the location of the picture.

Tap Set as, and choose Set as Lock Screen Wallpaper, Set as Home Screen Wallpaper, or Set as Both.

Always-On-Display

You don't need to unlock the phone to check the time. Turn on the Always- On-Display to view the exact time and dates.

• The longer the Always-On-Display time remains, the more the battery drains.
• The Always-On-Display will be no longer available if there is less than 10% battery.

Auto Screen Off

By default, your device will be automatically locked if you don't operate the phone for over 30 seconds, as a way to protect personal privacy. You can modify this by adjusting the auto-lock time.

Go to "Settings" > "Display & Brightness" > "Auto Screen Off".

Options range from 15 seconds to 30 minutes.

Display & Brightness screen sticker at a low screen brightness level. This will slightly increase image noise. Auto Screen Off 15 Seconds 30 Seconds 1 Minute 2 Minutes 5 Minutes 10 Minutes 30 Minutes Font Font Size Medium Display Size

Auto Rotate

You will have different views if you rotate your phone when you are typing texts or watching movies. You can turn on "Auto-Rotate" to automatically switch from landscape or vertical orientation. Swipe down from the top of the screen, enter Control Center and tap

• Swipe down from the top of the screen, enter Control Center and tap (☐)
• Go to "Settings" > "Display & Brightness" > "Auto Rotate".

Full-Screen Display

To acquire the more immersive experience in using realme UI, you can optimize the app display into full-screen.

Go to "Settings" > "Display & Brightness" > "More" > "Screen display."

Select the apps you want to make it into full-screen.

Airplane Mode

You can turn on/off Airplane Mode manually. When the Airplane Mode is on, the Bluetooth, Wi-Fi, Cellular Data will disconnect.

• Go to "Settings" > "Connection & sharing" >Turn on/off "Airplane Mode".
• Slide the screen down from the top to enter Control Center, tap → to turn on/off Airplane Mode.

Data Manager

Mobile Data Usage

Go to "Settings" > "SIM card & mobile data" > "Mobile data" to start.

Tap "Mobile data usage", Mobile data recently amounts counted by your carrier may differ from those on your device.

Tap "Mobile Data Limit", You can set the start date for data usage to start and daily cellular data limit.

Tap "Daily mobile data limit" if you want to know the daily usage.

You will receive notifications when data usage reaches a limited amount.

Data Saving

When "Data Saving" is on, apps in the background will not be able to use mobile data. Application in the foreground will decide if data-saving measures are to be taken, e.g. reducing image resolutions. In addition, you will not be able to use the network tethering function, and the status bar will display the data saving icon.

You can also set an unrestricted app. When Data Saving is on, those unrestricted ones will be able to receive new messages over cellular data.

"Settings" > "SIM Card & Cellular Network" > "Data Usage" > "Data Saving".

19:30 Data Saving Data Saving Apps in the background will not be able to use mobile data if this is enabled. Apps in the foreground will decide if data-saving measures are to be taken, e.g. reducing image resolutions. In addition, you will not be able to use the network tethering function, and the status bar will display the data-saving icon. Apps With Unlimited Data Usage 2 Apps

Contacts

Create New Contacts Manually

- Open "Contacts", tap + in the upper right corner.

- You can add other additional information for each contact, such as avatar, name, workplace, email address, birthday.

- You can customize ringtones and align contacts with a particular group.

New contact realme Planetary name Company Job title Mobile | Number Home | Email Home | Address Birthday | Date Friend | Related persons

Import Contacts

• Import Contacts from Storage Device. You can import contacts from your SIM card. If you have contacts stored in the MicroSD Card on your old phone, you can export contacts as a VCF file, and open the file to import contacts into your new phone.
• Import Contacts from Another Phone. Import the contacts stored on other phones to the new phone.

19:30 Import/Export Contacts IMPORT CONTACTS Import from Storage > Import from Other Phones > EXPORT CONTACTS Export to Storage Device > SHARE CONTACTS Share Contacts >

Name Cards Scan

Tap > "Name Card Folder" in the top left corner, scan the name card to identify and save as a new contact.

Manage Contacts

Tap : > "Settings"

Contacts to display. You can choose contacts that you want to display, or you select contacts with numbers to display.

Merge duplicate contacts. Tap "Merge Duplicate Contacts", and then the phone will automatically merge contacts with the same name.

Manage contacts. You can manage contacts without name or number or quickly remove invalid numbers.

19:30 Manage Contacts Unnamed Contacts None Contacts Without Number 2 contacts Delete Special Characters from Numbers Remove Numbers Longer Than 25 Digits

VIP Contacts

When you switch the phone into Silent Mode, or when you set the phone to block calls and notifications using Quiet Time, Game

Acceleration, or Anti-harassment, you could still add certain contacts to your VIP Contact list, allowing them to override the phone settings and have their calls come through and ring.

realme Call Message Video 123456 Mobile

All Call Logs

In "Contacts", you can view all call logs of a specific contact View Call Logs Go to "Contacts" > Select a contact > Tap "View All".

19:30 Call Log 12/3/19 16:46 F: 123456789 Outgoing (Not Connected)

My Groups

You can contact people from "Contacts" in batches through "My Group".

New Group

Go to "Call" > "My Groups". Tap and enter a group name to create a new group.

● Enter group name and select an account to add groups.
- Tap "Select" and choose members to be removed, then tap "Remove".
- You can send messages or emails to one or many members of a group.
You can customize ringtones for VIP contacts and self-created groups.

VIP Contacts

Calls from VIP Contacts will not be affected by Silent Mode, Do Not Disturb, Do-Not-Disturb Gaming, Do-Not-Disturb Driving, Do-Not-Disturb Cycling contacts. You can send a message and email to contacts in smart groups.

Do Not Disturb

If you are attending a meeting or in sleep, turn on "Do Not Disturb" to exempt from phone disturbance. In this mode, calls, messages, and notifications will be muted.

Turn on "Do Not Disturb"

Go to "Settings" > "Sound & vibration" > "Do Not Disturb".

When "Do Not Disturb" is turned on, calls, messages, and notifications will be muted except for alarm clock, countdown timer, and alerts that you previously permit. A warning-moon-shaped symbol will show up in the status bar.

You can choose to turn on the "Do Not Disturb" manually or automatically.

In the Auto-on mode, you can customize the time not to be disturbed or the content allowed to show up.

19:30 Do Not Disturb Enable Now The "Do Not Disturb" function disables the audio and vibration alerts unless you have changed alert permissions. A moon symbol will be displayed in the status bar when "Do Not Disturb" is enabled. Alarms from the Clock app or Timer will continue to function. SCHEDULED Do Not Disturb at Scheduled Times Not enabled EXCEPTIONS Allow Notifications Allow Messages From Deny All Allow Calls From Starred Contacts Only Ring for Repeated Calls A second call from the same number within 3 minutes will not be silenced

Customize "Do Not Disturb"

If you want to activate "Do Not Disturb" mode during either on

weekdays or at night automatically, you can choose to start the m on

particular dates, and set the starting and ending time as well.

19:30 Cancel Setting Rules Done Sleep Start 22:00 End Next day 07:00 Repeat Daily Sleep Sleeping Sleepy q¹ w² e³ r⁴ t⁵ y⁶ u⁷ i⁸ o⁹ p⁰ a s d f g h j k l z x c v b n m ?123 ,

Allowed Content

You can choose to allow notifications, messages, or calls from specific contacts.

When "Ring for Repeated Calls" is activated, another call from the same contact within 3 minutes will not be muted.

Do Not Disturb Enable Now The "Do Not Disturb" function disables the audio and vibration alerts unless you have changed alert permissions. A motion symbol will be displayed in the status bar when "Do Not Disturb" is enabled. Alarme from the Clock app or Times will continue to function: Allow Calls From From Anyone Only from Contacts Starred Contacts Only Deny All Allow Calls From Starred Contacts Only Ring for Repeated Calls A second call from the same number within 3 minutes will not be silenced

Convenient Features

Search Settings

In "Settings", enter a keyword in the searching box, you will find relevant functions. Tap a result to quickly jump to the corresponding setting page. For instance, if you search "Wi-Fi", you will see all the settings related to Wi-Fi.

Font

Change Font Size

You can also change the font size, display size, font weight, if you need a larger or smaller font.

Go to "Settings" > "Display & Brightness/Personalization" > "Font & display size".

16:25 ← Font & display size The Wizard of Oz Chapter XI: The Wonderful Emerald City of Oz Even with their eyes predicted by the green spicclades, Dorothy and her friends were at first dazzled by the brilliancy of the wonderful City. The streets were lined with beautiful houses all built of green marble and studded everywhere with sparkling emeralds. They walked over a pavement of the same green marble, and where the blocks were joined together, were rows of emeralds, set closely and glittering in the brightness of the sun. The window panes were of green glass. Even the sky above the City had a green lint, and the rays of the sun were green. There were many people—men, women, and children—walking about, and these were all dressed in green clothes and had greenish skies. They looked at Dorothy and her strongly evaporated company with wondering eyes, and the children all ran away and had behind their mothers when they saw the Lion. But no one spoke to them. Many shops stood in the street, and Dorothy Roboto Real Choice More Adaptive Font weight Default Auto Apply

16:25 Font & display size The Wizard of Oz Chapter XI: The Wonderful Emerald City of Oz Even with their eyes protected by the green spectacles, Dorothy and Roboto Real Choice More Adaptees Font weight Apply

Convenience tools

Simple gestures lead you with more precise and convenient use with realme UI.

Go to "Settings" > "Convenience tools". View and customize gestures such as tap, swipe, drag, and spread.

Awake Google Assistant

You can enable "Turn On Awaking Google Assistant by Pressing Power Button for 0.5 Seconds". While you can press and hold Power Button for 3 seconds to power off pages and hold down Power Button and Vol Up Button simultaneously for 10 seconds to force a reboot.

Assistive Ball

Once the Assistive Ball is enabled, you can try different gestures using the Assistive Ball. There are two ways to operate the Assistive Ball.

Gestures

• Tap to return to the upper page
• Double-tap to enter the multi-task mode
• Touch and hold to go back to Home screen

You can also personalize the gestures for Assistive Ball based on your preferences and usage habits.

19:30 Assistive Ball Assistive Ball Drag the Assistive Ball to move its position. OPERATION MODE Gesture Operations Tap Menu GESTURE OPERATIONS Tap Back Double-tap Multitasking Touch and Hold Home TRANSPARENCY OF THE ASSISTIVE BALL WHEN IDLING 60 20% 100% Hide Ball Automatically in Full

Tap Menu

After you open the "Tap Menu", tap the Assistive Ball and you will see five buttons with different functions. Click the button to complete your action.

• Return to the upper page
• Screenshot

• Multi-task

• Lock screen

• Go back to the home screen

19:30 Assistive Ball Assistive Ball Drag the Assistive Ball to move its position. OPERATION MODE Gesture Operations Tap Menu TOUCH THE ICON YOU WANT TO CHANGE: Back Screenshot Multitasking Lockscreen Home TRANSPARENCY OF THE ASSISTIVE BALL WHEN IDLING

After you enable Assistive Ball, you can also customize the display.

• Drag Assistive Ball to change its location
• Adjust the transparency of the Assistive Ball
  ● Auto hide Assistive Ball in full screen

Screen-off Gestures

About Screen-off Gestures

When the screen is off, you can use custom gestures on the screen for quick operations.

Go to "Settings" > "Convenience tools" > "Gesture & Motions" > "Screen-off Gestures".

After enabling Screen-off Gestures, you can choose to add the following gestures:

• Double tap to turn the screen on.
• Draw an O to enable the camera.
• Draw a V to open Flashlight.
• Music control: You can use two fingers to draw "II" on the screen to stop or resume playing music and "<" or "> " to previous or next music even when the screen is off.

Add Screen-off Gestures

You can also add your personalized Screen-off Gestures, for example, slide up to open the calculator.

Smart Sidebar

Smart Sidebar enables you to switch between apps, transfer files, reply messages, or take screenshots when playing a game or watching a video.

Go to "Settings"> "Convenience tools"> "Smart Sidebar".

After Smart Sidebar is enabled, you will see a white vertical bar on the right side. Swipe to the left and the Smart Sidebar will show up.

19:30 22 14 Tue, Dec 3 Clear 14°C Calendar Photos Clock App Market Theme Store Play Store Google Screenshot Record Sign... File Manager Calculator Edit

Quick tools

• Screenshot: You can capture the screenshots.
• Screen Recording: You can record the screen motions.

Quick Apps

You can switch from and to several most-used apps. For example, whileviewing a video you can also text messages using the floating sidebar.

19:30 Quick Tools Recommended Apps Screenshot Record Scr... File Manager Calculator Google Done

3-Finger Translate Powered by Google Lens

realme UI 2.0 integrates with Google Lens, which allows you to translate text in apps, webpages, and images into preferred language.

You can easily activate Google Translate when using 3-finger screenshot to take a partial screenshot or in the Smart Sidebar.

Long press to activate partial screenshot - Google Translate or go to Smart Sidebar - Google Translate.

Google Lens French → English Experience the ultimate aesthetic immersion Beauty beyond the visual The Find X2 series presents a simple and tangible elegance that will make your sensations take off. With smooth curves that fit perfectly in your hand, you can feel the beauty from your eyes right down to your fingertips. Translated text Copy all Open in translate Did you find these results useful? Yes No

FlexDrop

realme UI 2.0 makes your multi-tasking much easier.

With the help of FlexDrop, the app can be kept as a small window or mini window, which can help users see what's going on in different apps at once. With just a simple tap, users can switch between different APPs smoothly.

Path 1: Slide up from the bottom of the screen to activate it

Path 2: Smart Sidebar

19 30 Tue, Sept 15 Sunny 26°C Google Calendar Weather Clock Settings File Manager Photos App Market Tools

Nearby Share

realme UI 2.0 users can now use Android's Nearby Share function to quickly share files such as videos, images, and APKs with any Android phone without using data.

It's now working with devices running on Android 11.

Go to Photos-Send-Nearby Share

19:30 ← Camera × Nearby Share Lucy's Phone Make sure both devices are unlocked, close together, and have Bluetooth and location turned on. Learn more

Screenshot

You can take screenshots while using the phone, the screenshots will be stored in "Photos"

You can take screenshots in the following ways.

Button Screenshot

Press and hold the Power Button and Volume Down Button.

3-Finger Screenshot

Swipe down with three fingers to quickly take a screenshot.

Go to "Settings" > "Convenience tools" > "Screenshot" > "3-Finger Screenshot".

After three-finger screen capture is enabled, press and hold at any position on the screen with three fingers and slide down to set the size of the area to be captured as desired.

Assistive Ball Screenshot

1. Go to "Settings" > "Convenience tools" > "Assistive Ball".

2. When Assistive Ball is on, click "Tap Menu" to view shortcut icons.

3. Tap the Assistive Ball and click "Screenshot" to take a screenshot.

Smart Sidebar Screenshot

Go to "Settings" > "Convenience tools" > "Smart Sidebar".

Swipe out the sidebar and click "Screenshot" to take a screenshot.

Long Screenshot

After capturing a screenshot, pull up the screenshot preview floating window to capture a long screenshot. Slide the screen to the desired position, and tap Complete to save the screen as a long screenshot.

Sharing a Screenshot

After capturing a screenshot, pull down the screenshot preview floating window to go to the sharing screen. You can share the screenshot with your friends by using realme Share, WhatsApp, etc.

Split-Screen

The App Split-screen provides you with a divided screen that is split into two areas, with each area showing a different scene at the same time. You can watch a movie while chatting with friends within the split-screen.

Go to "Settings" > "Convenience tools" > "App Split-screen".

Turn on "App Split-screen" with the following three ways.

• Swipe up with 3 fingers to enter the split-screen mode.
• Press and hold the Multitask button to enter the split-screen mode.
• Swipe down a task card, then tap Split-screen to enter the split-screen mode.

19:30 Split Screen When using apps that support Split-screen, just swipe up with three fingers to enter Split-screen mode. Split Screen Swipe Up with 3 Fingers for Split-Screen

Split-Screen Adjustment

After you enter Split Screen, you can drag the borderline between two apps to adjust each screen size.

19:30 Tracks Artists Albums Playlists No Music Found Our power-efficient built-in media player C % × ÷ 7 8 9 × 4 5 6 - 1 2 3 + 00 0 . =

Adjust Split-Screen Location

You can move the location of the Split-screen apps the icon.the the upper or lower area, click the borderline at the middle and tap 1l

Exit Split-Screen

You may exit the split-screen mode in the following three ways:

• Drag the borderline to exit Split-screen. You can drag the line to the top to exit the upper Split-screen, otherwise, you may drag the line to the bottom to exit lower Split-screen.
• Click the borderline and choose . ✗

App Cloner

After enabling App Cloner, a copy of a particular app will be generated on the Home screen. The original app and its copy could run simultaneously without affecting each other.

Clone Apps works only if both the app itself and the phone supports it. If a cloned app does not work properly, it means that the function or operation is not supported by the app or phone.

Clone Apps currently do not support data transferring between a cloned app and a computer. At most two app clones can be operated simultaneously.

Apps That Can be Cloned:

• BBM
• WhatsApp Messenger
• Messenger
• Hike News & Content
• Facebook
• imo
• Instagram
• Skype
• Telegram
• Viber Messenger
  • Zalo

Go to "Settings" > "App management" > "App Cloner" > "Apps That Can Be Cloned".

19:30 App Cloner Facebook Off > Instagram Off > WhatsApp Off > Apps That Can Be Cloned When an app has cloning turned on, an app clone that runs independence of the original app will be added to the Home screen. App Cloner won't work on third-party launchers. You can clone up to 2 apps at the same time. 19:30 Facebook Facebook (Clone)

Power Saver

realme UI 2.0 will detect user scenarios, and you can choose from different power saving strategies.

Save Power

realme UI 2.0 will automatically detect the power consumption issues. You can tap "Save Power" to optimize and extend battery life.

Go to "Settings" > "Battery" > "Save Power" > "Extend Battery Life".

Power Usage

Go to "Settings" > "Battery" > "Phone battery usage".

You can view power usage of today, yesterday and 2 days ago. You can also view apps' foreground and background activity time, and their power consumption.

Power Saver Options

Go to "Settings" > "Battery" > "Power Saving mode".

High Performance Mode

Go to "Settings" > "Battery" > "High Performance Mode".

The system will operate in high performance mode, but it will increase extra power consumption.

Battery 64% 1 issue found. Save power now. Save power Charging Power saving mode Time remaining: 1 d 2 h 10 min Super power saving mode Time remaining: 1 d 13 h 53 min App battery management > Phone battery usage > More battery settings > You might be looking for: Auto screen off

Super Power SavingMode

The Super Power Saving mode helps extend your phone's battery life at extremely low battery levels. A maximum of 6 apps can be displayed on the Home screen in Super Power Saving mode.

Based on tests performed at realme labs, a phone with 5% battery can be used for WhatsApp messaging for up to 90 minutes. *

Go to Settings - Battery - Super power saving mode

19 30 May 16 ,Thu Phone Messages Clock Chrome Photos Soloop Battery can last up to 0 d 1 h 54 min

Battery Guard

Considering the power supply voltage could be unstable sometimes, and some users often worry that prolonged charging will damage their battery health. On realme UI 2.0, Battery Guard rises to the occasion by learning users' charging habits - stops charging to 80% at night and re-charge to 100% by the time users get up. Users will no longer have to worry about the harms of prolonged charging.

Go to Settings - Battery - More battery settings - Optimized night charging

Low Battery Message

When phone battery drops to 15%, realme UI 2.0 provides options to send messages that display users' current locations to selected contacts, allowing users to share their status with families and friends when their phone is about to run out of battery.

Control Center

Control Center offers you instant access to the most frequently used features such as calculators, cameras, and flashlights, allowing you to view recent and earlier notifications within simple swipes.

Swipe down from the very top of any screen (except the notch at the top center of the display) to enter Control Center.

Press and hold a certain icon to start customization. For example, you can adjust the display warmth or coolness manually by pressing and holding the icon for Night Shield mode.

Change or Rearrange Icons

For the frequently used icons or functions, you can add them to the notification bar manually. Scroll down to enter Control Center, click ☑ from the top right corner, then press and hold to move the icons to the notification bar.

Edit TOUCH AND HOLD AN ICON AND DRAG TO SORT WiFi Cellular Data Mute Bluetooth Flashlight Modes Airplane Mode Location Services Auto Rotate Eye Care Record Screen Dark Mode Clean Storage Power Saving Mode Personal Hotspot NFC OPPO Share Do Not Disturb Assistive Ball Calculator DRAG AN ICON UPWARD TO AED Camera Clock One-Handed Mode Kid Space

Quick Actions

Quick Actions in Control Center include:

Enable Network

● Airplane Mode: Disable cellular data immediately.
- Cellular Data: Enable or disable mobile data to connect to the network.
- WLAN: Look through websites, or download movies.
- Bluetooth: Connect to earphones, car kit system or other devices that support Bluetooth connectivity.
- Personal Hotspot: Connect to computers or other devices that share your network.

• realme Share: Share your photos, videos or locations with other realme devices around you.
  ● NFC: Enable NFC to finish payment or transmit data.
• Location Services: Turn on location services to allow apps and system service to access your location.

Control Volume

• Silent Mode: Mute notifications.
• Do-not-disturb Mode: Mute incoming calls and notifications, choose when not to be disturbed.

Accessibility Aid

• Assistive Ball: Switch Assistive Ball on to aid operations.
• One-hand Mode: Shrink the screen size for the users who would like to operate with one hand.
• Auto-rotate: Screen will be automatically switched either to landscape or vertical orientation while you rotate the phone.
  ● One-tap Lockscreen: Enable the swift screen lock.

Other Quick Actions

● Flashlight: Turn on the LED flashlight if there's a need for lighting.
- Calculator: Launch quick calculating, and complete online currency exchange.
- Quick Search: Enter the browser and search.
- Accelerate and Clean: Enter Cleanup Storage mode and start the cleanup.
● Power Saver: Turn on to save power.
- Camera: Tap to start shooting, taking selfies or recording videos.
- Clock: Enter Clock to access to the alarm clock, stopwatch, and timer.
- Screen Recording: Tap to start recording the screen.
- Night Mode: Adjust the screentone as warmer at night or dim-lit environment for eye protection.
- Multi-screen Interaction: Project the screen to a TV or other outlets via the Wi-Fi Display.

Notification Bar

You can customize your notifications so you see only what is important to you.

However, you would not see what's in the Notification Bar if the screen is

locked. Swipe down from the top to see recent notifications, then scroll up to see older notifications.

See Recent and Earlier Notifications

Tap to see the notifications.

Remind Me Later

Swipe left and tap and the notification will be pushed afterward set the duration of what time you want to receive the notification.

Tue, Dec 3 Data used today: 679 KB. Daily limit: 1 GB: Snooze for 1 hour Undo 15 minutes 30 minutes 2 hours CLEAR ALL

Set Notification Preference

Swipe left to manage notifications. Tap ⚙> to set preference for a particular notification, or manage a batch of notifications as following instructions:

Go to "Settings" > "Notification Bar and Status Bar" > "Manage Notification".

Customize notifications based on your preferences and daily usage habits. The customization includes the style of previews and type of notifications.

You can choose to:

● Show icons on the Home screen.
● Show icons on the Lockscreen.
● Show banners on the top of the screen when the phone is locked.
- Turn on ringtones and vibrations.

You may also set to allow some app notifications to show up even if your phone is in silent mode.

19:50 App Market Allow Notifications Number Badge Mark Badge No Mark CATEGORIES App Download and Installation Notification Notification Drawer, Status Bar, Banners, Lock Screen App Upgrade and Installation Notification Notification Drawer, Status Bar, Lock Screen New User Notification Notification Drawer, Status Bar, Banners, Lock Screen

Status Bar

Status icons are displayed on the status bar to indicate time, carrier, wireless connectivity, and battery status.

You can acquire a visual presentation of the battery percentage and network speed after you prompt the switch.

Go to "Settings"> "Notification and Status Bar", and switch the sliders to green.

19:30 Notifications & Status Bar Display Data Usage in Notification Drawer Manage Notifications STATUS BAR Battery Percentage Real-Time Network Speed Notification Prompt in Status Bar No Prompt OTHER Wake Screen When Notifications Received on Lock Screen When turned off, the screen will not automatically light up except for incoming calls, SMS message and other lockscreen notifications. Show Banner Notifications in Full Screen Once turned on, Banner Notifications are displayed in full screen mode, such as when you are watching videos or playing games. This minimizes unwanted use of the screen.

Create App Shortcuts

After enabling the App Shortcuts mode, press and hold the app icon to create an icon. Tap the icon you would like to use, then the app will open directly to that feature. For example, go to your Home screen and press and hold on the icon of Camera that lets you jump straight to portrait shooting, Beauty Selfie, Video Recording, or the App Info page.

19:30 22 32 Tue, Dec 3 Clear 14°C Calendar App Info Remove Portrait Beauty Selfie Video

Keyboards and Input Methods

Texts are important ingredients to record and exchange information. With the help of useful keyboards, working efficiency will be enhanced while communicating with others.

Default Input Methods

Go to "Settings" > "Additional Settings" > "Keyboards & input Methods" > "Current Keyboard".

Security Keyboards

After checking "Use secure keyboard when entering a password", the security keyboard will be automatically switched on while you type passwords, in order to better protect the privacy and data safety.

Customize Keyboard Settings

To personalize the keyboard setting, go to "Settings" > "Additional Settings" >

"Keyboard and input methods" > "Available Keyboards"> click on the existing

input methods and customize.

Type Emojis and Stickers

It might be a bit dull to merely type with texts. Tap the Emoji button at the

bottom of the keyboards, and try out something interesting such as Em and

stickers (it has to be downloaded additionally) while typing.

19:50 Cancel New Message To: + Message Search emoji ABC GIF :-)

Voice Typing

While it's a bit inconvenient for you to type texts, you can use the b-in microphone to input audio-generated texts instead of typing it.

19:50 Cancel New Message To: + Message Speak now Q¹ W² E³ R⁴ T⁵ Y⁶ U⁷ I⁸ O⁹ P⁰ A S D F G H J K L Z X C V B N M ?123 , 😊 .

Autofill Service

You can download and install autofill apps from the App Store to help you remember what you've already filled in, and fill in the information automatically when you need it.

Go to "Settings" > "Additional Settings" > "Keyboard & InputMethod" > "Autofill Service".

realme Share

Use realme Share to send files wirelessly and effortlessly between realme devices. Mobile data will be no longer needed.

How to turn on realme Share:

• The receiver should open Control Center, and then turn on realme Share
• Select the files to be shared and the device to share with, tap Send, then tap the detected realme phone.
• Tap Receive on the other device and start sharing.

Tips:

- realme Share requires that both the sender and receiver are realme phones.

- Make sure the sender and receiver are connecting to the same Wi-Fi network.

● realme Share will switch off within 5 minutes.

Search Settings, Data, and Files

- You don't need to look through your phone in every single app to find a setting or file. realme allows users to optimize built-in searching engine by simply tapping a keyword.

19:30 ca Exit APPLICATIONS Expand Calculator Application Calendar Application Camera Application Search the Web Page ca can call q 1 w 2 e 3 r 4 t 5 y 6 u 7 i 8 o 9 p 0 a s d f g h j k l z x c v b n m ?123 , 😊 .

Two ways to configure searching:

• Swipe down the screen at any page to start searching
• Tap the search bar at "Smart Assistant"

Multiple users, one phone

Got your personal information mixed up on a shared device? Need an easier way to keep your work and personal life separate? Want to maintain your privacy when lending out your phone?

Multi-user mode allows you to create multiple user profiles. Each account has an independent password, and data from different accounts is kept separate to maintain everyone's privacy.

1. Go to Settings, enter Users & Accounts, and then tap Multi-User;
2. Tap Add user to set up 3 kinds of account profiles: owner, users, and guests.
3. Instantly switch between accounts with just a tap.

17:09 Users & accounts USER Multi-user Emergency info Related info and contacts info of Owner ACCOUNTS Automatically sync app data Add account You might be looking for: System cloner

17:09 Multi-user Owner Administrator Current user realme realme 01 realme 02 Guest

Accessibility

Accessibility is aimed to optimize user experience for visually impaired users.

Go to "Settings" > "Additional Settings" > "Accessibility".

TalkBack

When TalkBack in on, it provides spoken feedback so that you can use your device without looking at the screen. This can be helpful for people who are blind or have low vision.

Turn on TalkBack

Go to "Settings" > "Additional Settings" > "Accessibility" > "TalkBack".

TalkBack Settings

Go to "Settings" > "Additional Settings" > "Accessibility" > "TalkBack" > "Settings".

You can set Speech, Other feedback, Navigation and Miscellaneous according to your needs.

To Navigate Using TalkBack

• Swipe right or left to move between items.
• Double-tap to activate an item.
• Drag two fingers to scroll.

To Turn off TalkBack

• Tap the switch. You will see a green outline. Double tap the switch.
• On the confirmation message, tap "OK". Then double-tap OK.

Accessibility Menu

The accessibility menu provides a large on-screen menu to control your phone.

You can control gestures, hardware buttons, navigation, and more.

Turn on Accessibility Menu

Go to "Settings" > "Additional Settings" > "Accessibility" > "Accessibility

Menu".

Tap the Accessibility button on the bottom of your screen to use this feature.

Turn off Accessibility Menu

Go to "Settings" > "Additional Settings" > "Accessibility" > "Accessibility

Menu".

Note. Press and hold the Accessibility button on the bottom of your screen to

switch between Accessibility Menu and Select to Speak.

Select to Speak

When Select to Speak is on, you can tap specific items on your screen to hear

them read aloud.

Turn on Select to Speak

Go to "Settings" > "Additional Settings" > "Accessibility" > "Select to Speak".

Tap the Accessibility button on the bottom of your screen to use this feature.

Select to Speak Settings

Go to "Settings" > "Additional Settings" > "Accessibility" > "Select to Speak" > "Settings".

You can set Read in the background or Read the text on images according to your needs.

Use Select to Speak

First, tap the icon. Then you can:

• Tap a specific item, like text or an image
• Drag your finger across the screen to select multiple items
• Tap the play button to hear everything on the screen
• Select text that appears inside the Camera view

Turn off Select to Speak

Go to "Settings" > "Additional Settings" > "Accessibility" > "Select to Speak".

Note: Press and hold the Accessibility button on the bottom of your screen to switch between Accessibility Menu and Select to Speak.

Switch Access

Switch Access lets people with motor impairments control phones and tablets using one or more switches. Use switches to select items, scroll, enter text, and more.

Turn on Switch Access

Go to "Settings" > "Additional Settings" > "Accessibility" > "Switch Access".

Switch Access Settings

Go to "Settings" > "Additional Settings" > "Accessibility" > "Switch Access" > "Settings".

You can set Assign switches, Customize scanning, Display & sound, Switch accommodation and more according to your needs.

Turn off Access Settings

Go to "Settings" > "Additional Settings" > "Accessibility" > "Switch Access".

Customize Settings

You can set "Click When the Pointer Stops Moving", "Press Power Button to End Call" and "Touch & Hold Delay" according to your user habits.

Go to "Settings" > "Additional Settings" > "Accessibility".

Text-to-Speech (TTS) Output

You can customize TTS Output.

Go to "Settings" > "Additional Settings" > "Accessibility" > "Text-to-Speech (TTS) Out".

Tap the icon on the right side of "Preferred Engine", you can select and install voice data.

You can also customize language, speech rate and pitch according to your habits.

Accessibility Shortcuts

When Accessibility Shortcuts is on, hold down both volumes buttons for 3 seconds to turn on accessibility function. You can choose shortcut services and turn on/off "Available Even When the Screen Is Locked".

Go to "Settings" > "Additional Settings" > "Accessibility" > "Accessibility Shortcuts".

Subtitles

You can adjust subtitles on the screen to enhance the watching experience.

Go to "Settings" > "Additional Settings" > "Accessibility" > "Subtitles".

Clean Storage

Cleaning the storage when there is less abundant space for storage to

download apps and restore photos. While Clean Storage will help you detect

and remove unnecessary files, cookie, and cache files to free up more storage.

Check Storage

Go to "Settings" > "Additional Settings" > "Storage", and you will see the followings:

• Overall storage availability
• Storage used
• Storage left

19:30 Storage Phone Storage Clean 32.8 GB used 256 GB total Picture 129 MB Video 5.95 GB Audio 0 B Documents 128 KB APK 21.7 MB Apps 7.09 GB Other 22.0 MB System 19.60 GB

One-tap Cleanup

realme UI will help identify useless or unimportant files if you want to clean up storage. Tap "Clean", and the phone will automatically clean the files. Fast and steady.

Delete App Data

realme UI also offer specialized cleanup service for some frequently used apps.

Categorized Cleanup

You can also clean storage and accelerate the system based on different categories of files and data.

- Photo cleanup

You can easily delete photos that may either be less visually aesthetic or repetitive. realme UI assists you while cleaning up photos as it has already automatically screened them out into the categories such as screenshots, recently deletes, similars, burst shooting, blurred shots, and edited photos.

If you delete photos under the above categories, more space will be released. This action can not be undone.

- Video cleanup

You could delete unnecessary videos or video clips after viewing them. Select the video files that you intend to remove.

● Audio and documents cleanup

After realme UI filters audio and documents, you can choose which to remove according to the size and type of audio and documents.

19:30 Clean Up 39.9 MB View Details > Clean Phone Storage 32.8 GB Used 256 GB Total APPS & APP DATA App Data 395 MB WhatsApp Cleaner CATEGORIZED FILES Photo Cleaner 42.5 MB Video Cleaner 6.06 GB Audio

Back Up Your Phone

If you have switched to a new realme phone, you can transfer your data from the old phone to your new realme phone. It is advised that you are supposed to maintain phone backup on a regular basis. There are two ways to do it.

Use HeyTap Cloud

Go to "Settings" > "HeyTap Cloud" > Enter HeyTap ID and password.

If you have not created an HeyTap ID yet, click "Register" at the bottom right corner to finish registration with the mobile phone or email address.

After you log into your HeyTap ID, go to "HeyTap Cloud" > "Cloud Backup" > "Manual Backup", and you are able to transfer following data and files to the cloud, including:

• call log
• SMS
• Settings

HeyTap Cloud Quick Start Guide for Cloud Service View Now Cloud Drive Cloud Backup Off About Cloud Data Sync Photos Off Recordings Off Contacts Browser Wi-Fi MORE SERVICES More Visit cloud hiertop.com on a PC to view your cloud data.

Manual Syncing

Sync to the Phone

Go to "Settings" > "Additional Settings" > "Back up and Reset" > "Back Up & Restore", tap "New Backup", then select data you want to sync.

• Contacts
• Messages
• Call History
• System data
• Apps(Excluding data)

After clicking on "Start", the data selected will be synced and restored in your phone inside a file path named "Backup". Syncing will take some time. Don't disconnect your phone during the copy backup process and avoid restarting or turning off the phone, in case of loss of data.

19:30 New Backup Select Data to Be Backed up Contacts 3/3 files 31.17 KB Messages 9/9 files 6.59 KB Call History 2/2 files 900 B System Data 6/6 items 522 KB Apps (Excluding Data) 23/23 files Start

It is noted that all the local backup data will be cleared if you erase or reboot all the settings. Therefore, it is wise to copy or restore files and data before rebooting or upgrading the system.

Restore Data on Your Computer

Use USB cable to connect your phone to a computer. Follow the onscreen instruction and choose "Transfer Files". Open "Sharing Storage" at the computer, and then select the "Backup" folder and copy it to the computer.

Then the backup is transferred to your computer.

Charge the Battery

You can view the percentage of battery remaining in the status bar at the top right corner of the phone. Charge your battery when your phone is low on power using the Type C USB cable and USB power adapter. Charge the battery. Connect your phone to a standard power outlet or a portable charger.

CMCC 17:16 Tue, Dec 15 Charging 66.80% SUPERDurch

If the proportion of battery is too low, it is likely that you won't be able to turn on you phone. You should charge the battery to continue using your phone.

Restart or Turn Off Your Phone

If something isn't working right, try to restart your phone.

To restart the phone, you can:

• Press and hold the Sleep/Wake button for more than 3 seconds, and then drag the white-colored power icon up to restart or,
• Press and hold the Power Button and volume-up button at the same time for more than 10 seconds.

To turn off the phone, Press and hold the Power Button for more than 3 seconds, and then drag the white-colored button downwards.

19:30 22 46 Tue Duc 3 Clear 14°C Reset Power Off Calendar Photos Clock Settings App Market Theme Store Play Store Google

Print right from your smartphone

Printing is no longer just for computers. We've made mobile printing possible.

realme UI 2.0 comes with a built-in print service called Wireless Printing. You can easily print documents and photos when your smartphone is connected to a printer.

Print documents

1. Make sure your printer supports the Mopria Print Service and is connected to the same Wi-Fi network as your phone.
2. Go to File Manager, open a document, tap the 3 dots icon, and select Print;

How is everything you need to know about Further explore the comprehensive screen, how we focus on the addition, and share a focus of simplicity in their life. This is an elegant, tighter in soft, easier to interact, and bigger in room. The technology looks at a better idea like going, uses the most remarkable and notably quite a moment. According to this, you are looking up again. Take a deal, then we walk to out. The question allows us to use the questions to create. The mobile phone seconds change your words, giving you a more intense immersion, faster and more enjoyable gas ing experience. Smooth and delightful. Follow us to close

Send file... Download Print Report a bug In this way finding you need to save about! Further exploration the comprehensive access, allows blockchain care in the subscription, and achieve a healthy quality of simplicity in the local. The best implementation, lightest in days, easier to improve, and highlight in steps. The technology being used to listen on a key, giving your attention to the most delicate and difficult and quick experience. A good understanding point you are better understanding experience. Take a short track and work load. The operation is more sensitive and the operation is seeking. The mobile phone sounds change go me inside, giving you a more intense interaction, facial and more enjoyable use of experience. Wealth and delightful follow us to explore

1. Select a printer and connect to it, and then select print settings;
2. Tap Print to print your documents.

19:30 Cancel Preview Print Guangzhou Office Printer 172.16.0.254 Page 1 of 1 Print Settings Copies 1 Colour Portrait Single-Sided Loading do ISO A4 All Pag... 1

Print photos

I Make sure your printer supports the Mopria Print Service and is connected to the same Wi-Fi network as your phone.

I Open Photos, select a photo, tap Send, and select Default print service;

19:30 Today 9:02 pm Send Favourite Edit Delete More

19:30 Cancel 1 Selected Facebook WeChat WeChat Moments Gmail Messages Default Print Service Bluetooth Add to Maps Turn On

1. Select print settings;
2. Tap Print to print your photos.

19:30 Cancel Preview Print Guangzhou Office Printer 172.16.0.254 Page 1 of 1 Print Settings Copies 1 Colour Portrait Single-Sided ISO A4 All Pag... 1

*Wireless Printing currently only supports photos and PDF files.

Manage all your emails in one place

Managing multiple email accounts is time-consuming, requiring you to juggle different apps which may take up too much space on your phone.

The built-in Mail app on realme UI 2.0 is now the one place for you to manage all your emails with ease. Send, receive, and track emails effortlessly and even sync your Google Calendar account. To make it even better, it's completely ad free.

Sign in to your email account

Open Mail and sign in to your email account (for example, Google, Outlook, Yahoo Mail, etc.).

19:30 Add Account Personal and enterprise accounts are both supported. Email Account Account Password! Sign In Manual Setup q w e r t y u i o p a s d f g h j k l z x c v b n m ?123 @ 😊 . →

Manage accounts and emails

Once you're logged in, you can swipe left to start setting up the app and managing multiple accounts.

- Tap Add to add other email accounts so you can manage them all in this app.

- Tap Settings and select Signature to create unique email signatures.

19:30 Account Add COMMON Inbox 28 VIP Unread 28 Drafts Sent All Folders Other Mail Contacts Attachments Settings

- Tap the + icon on the homepage to compose new emails.

- Tap the Add event button in the bottom right corner of the email composing screen to send a meeting invitation. Events will be seamlessly synced with your Google calendar account to streamline your workflow.

19:30 Send Message To: Cc: Bcc: Subject Write your message Attach File Add Image Add Event q w e r t y u i o p a s d f g h j k l z x c v b n m ?123 @ 😊 . ✓

19:30 Send Event Invitation To: Cc: Bcc: | Subject Start End 27 February, 5:00 pm 27 February, 6:00 pm Location Reminder 15 minutes ago Attach File Add Image Delete q w e r t y u i o p a s d f g h j k l z x c v b n m ?123 @ 😊

Take notes with Text scanner anytime, anywhere

Ever struggle to take clear photos during a presentation when you are sitting at the far side of the room?

Text scnner is here to help you enhance photos and sharpen photo text.

Take photos

1. Open Camera, tap More, select Text scanner, and take photos.

2. Text scanner will be able to recognize text from your photos, correct distortion, and adjust text layout.

CottonOS 7 User Guide Text Scanner

Enhance photos

1. Open a photo and tap the T icon in the upper right corner.

Today 9:43 pm Have it everything you need to know about. Further explore the comprehensive sense, show women care in the basketball, and will live the beauty of simplicity to the break. The colors are lighter, lighter in white, easier to interact, and lighter to watch. The technology beauty is hidden into life, giving usess the most delicate and natural quality experiences. Algorithmic breathing gives you a better shooting experience. Take a shot, the best work is out. The operation is more sensitive and the operation is easier. The mobile phone seconds change game console, giving you a more intense immersion, faster and more fantastic gaming experience. Smooth and delightful. Follow us to explore.

1. Then, you can select Adjust to resize photos to make the text more organized.

19:30 The first letter is written in the word. For the words, the words are not written. The words are written in the word. The words are written in the word. The words are written in the word. I've been written down to the word. I've been written out the word. I've been written out the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been written down to the word. I've been written out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I've been writing out the word. I've been writing out to the word. I's being written out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing out to the word. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session. I've been writing at the end of this session.

1. You can also select Enhance to apply effects like "Color", "Black & white", and "Outline" to sharpen the text.

Here is everything you need to know about Further explains the comprehensive power, show authentic cars in the subscribers, and achieve the absence of targeting in the brief time are tighter, tighter in little, easier to learn, and lighter to know. The technology beauty is holder into life, giving every the most desirable and not sure quality experienced. Analytic streaming since your best speaker experience. Take a bus, the best work is all. The operation is more sensitive and the limitation is important. The mobile prize backwards change your console, giving you more interesting boards more enjoyable getting experience. Growth and delightful. Follow us to explore

You can choose your favorite color from 12 colors in 5 schemes. Your selected theme color can be applied to controls and icons to ensure a consistent visual experience.

Go to Settings > Personalizations > Color.

19:30 Colors COLOR SCHEME Default Cool Warm Pink Morandi SINGLE COLOR Apply

Customizable Always-On Display

Further to the various style options on realme UI, realme UI 2.0 allows you to customize your own Always-On Display (AOD) pattern.

A simple, black panel is provided as your canvas. Tapping or dragging your finger on this panel will generate your owned style AOD patterns.

Go to Settings - Personalizations - Always-On Display - Custom patterns

19:30 Cancel Always-On Display Next Random Clear

In realme UI 1.0, we unveiled a highly-customized All-Day Dark Mode that is compatible with third-party apps. This dark mode has further evolved in realme UI 2.0.

It offers three color schemes with different level of contrast, allowing you to set the auto start and off time, and can even adjust to the sunrise and sunset.

Go to Settings - Display & brightness - Dark Mode - Dark Mode settings

Privacy and Security

Manage the Information and Permission

Personal Information Protection

When an app reads personal information such as phone call history and contacts, the system will shield the authentic information to avoid information leakage.

Go to "Settings" > "Privacy" > "Personal Information Protection".

You can enable "Smart Protection Turn-on" to allow the system to determine on its own whether to turn on protection for new apps. You can also choose to turn on "Protect Call History", "Protect Contacts", "Protect Messages" and "Protect Events" by yourself.

Manage App Permissions

Enable "APP Permissions" to manage and set the permissions of each app, such as locating, dialing, acquiring calling history and more.

Go to "Settings" > "Privacy" > "APP Permissions".

19:30 App Permissions Permissions Apps Phone 15 Apps Call History 2 Apps Contacts 18 Apps SMS 26 Apps Location Info 21 Apps Camera 18 Apps Microphone 15 Apps Storage 25 Apps Calendar 4 Apps Body Sensor 1 Apps 19:30 App Permissions Permissions Apps Amazon Shopping 10 Permissions Dailyhunt 4 Permissions DocVault 2 Permissions Facebook 12 Permissions Game Space 5 Permissions Google News 4 Permissions Helo 7 Permissions Instagram 9 Permissions Lens 4 Permissions LinkedIn 8 Permissions

You could customize the permissions that allow some apps for particular

functions, such as dialing, acquiring contacts and messages, using a camera.

You can also set permissions for a single app.

Emergency SOS

realme UI cares about users' personal security. "Emergency SOS" is a feature that is aimed to help you make emergency calls and send SOS messages more conveniently.

Turn On Emergency SOS:

Go to "Settings" > "Privacy" > "Emergency SOS".

After reading the terms and conditions carefully, tap "Agree".

Emergency Numbers:

Go to "Settings" > "Security" > "Emergency SOS" > "Emergency Numbers" > "Add Emergency Contact".

Police, Fire Police, and Ambulance are the 3 default emergency contacts set by the phone system. You can add up to 3 emergency contact numbers and send SOS messages with locations, pictures, and audio recordings.

19:50 Emergency SOS MAKE SOS EMERGENCY CALLS BY PRESSING THE POWER BUTTON THREE TIMES CONSECUTIVELY. Emergency Numbers Auto Dial the Default Number When initiating an emergency call with the Power button, your phone will call the default number you set after a 3s countdown. Sound Alert Before Dialing Send SOS Message After making an SOS emergency call, you can send an SOS message to MY EMERGENCY CONTACT that shows your current location.

Initiate an SOS Emergency Call

• Press the Power Button 5 times in succession to initiate an SOS emergency call.
• Turn on "Auto Dial the Default Number" by pressing the Power button. An emergency call will be automatically dialed after a 3-second countdown.

Send SOS Message

When you enable "Send SOS Message", you can choose to send an SOS message to the emergency contact that indicates your current location, includes pictures of surroundings or a 5-second audio recording.

Privacy Password

A privacy password is used to protect your personal privacy. When Privacy

Password is on, the passcode will be used for verification in App Encryption.

Set Privacy Passcode

• Go to "Settings" > "Fingerprint, Face & Password".
• Tap "Privacy Password" and click "Turn on Privacy Password".
• You can choose a pattern password, 4-bit, 6-bit, 4-16 bit digital password, or 4-16 bit alphanumeric password combination.
• After finishing responding to security questions, tap "Done" in the top right corner.
• You can also bind a security email address.

Modify Privacy Password

Go to "Settings" > "Fingerprint, Face & Password" > "Privacy Password".

Tap "Modify Privacy Password", enter the original password, and then set up a new password.

Reset Privacy Passcode

- If you forget your privacy password, you can reset it in three ways: answering security questions, entering verification code through the bound security email.

Tap "Forgot Password" to reset the passcode:

● Security Question: Answer the security question.

● Security Email: Enter the bound email address to receive verification code.

Turn off Privacy Passcode

Go to "Settings" > "Fingerprint, Face & Password" > "Privacy Password".

Click "Turn off Privacy Password", tap "Turn Off" and enter the original password.

Privacy Password PASSWORD MANAGEMENT Turn Off Privacy Password Change Privacy Password METHOD FOR RESETTING PASSWORD Turn Off Privacy Password? When Privacy Password is turned off, you can no longer access App Lock and Private Safe. Make sure that the data is removed before turning it off. Cancel Turn Off PRIVACY FEATURES App Lock Private Safe About Privacy Password: 1. The privacy password is stored in the phone's chip-level secure storage - Trusted Execution Environment (TEE), and is protected from theft or state-force decryption. 2. When Privacy Password is turned on, this password is required when accessing privacy functions such as App Lock and Private Safe.

App Lock

You should set a privacy passcode before you use "App Lock".

Turn on App Lock

• Go to "Settings" > "Privacy" > "App Lock".
• Enter the privacy password.

- Select the apps that you want to be encrypted, and tap "Encrypt".

19:30 Cancel Select the Apps to Be Encrypted Encryption of personal apps is recommended to prevent theft of private data WhatsApp Encryption is recommended Photos Encryption is recommended Messages Encryption is recommended Facebook Encryption is recommended Dial (Contacts) Encryption is recommended Amazon Shopping App Market Browser Encrypt 5

Access Encrypted Apps

- Access with a private password

If an app is encrypted, enter the correct privacy password to access the app.

● Fingerprint and facial recognition

You can also use fingerprint and facial recognition to open encrypted apps.

Go to "Settings" > "Privacy" > "App Lock".

After entering the privacy password, tap to enter the "App Lock Settings", enable "Use Fingerprint for App Lock" or "Use Face for App Lock".

19:50 App Lock Settings Change Privacy Password and Settings Change your privacy password, security questions, and linked email address. Change Access Number When any other, we will get further access, you are also there by checking the access number on the check. Use fingerprint for App Lock No Verification Until Screen Off After exiting an encrypted app, password verification is not required for recentering the app if the screen is not locked. Reset App Lock

Turn off App Lock

• Go to "Settings" > "Privacy" > "App Lock".
• Enter the privacy password.
• Tap the app and turn off "Enable Password Verification".

Hide Home Screen Icons

• Go to "Settings" > "Privacy" > "App Lock" and enter your privacy password.
• Select the app icons that you want to hide in the Home screen, turn on "Enable Password Verification", then turn on "Hide Home screen Icons".

When an app icon is hidden, you can view the app by entering the access number on the touchpad. This does not require verifying the encryption passcode.

Access-Hidden Apps

Enter the access number on the touchpad to open the app. The access numbers begin with "#" and end with "#" which also contains 1-16 digits, such as # 0000 #.

Payment Protection

realme UI provides you with a secure payment environment that ensures a safe environment for online payment.

When you use mobile payment, the system will automatically detect the current payment environment.

Payment environment checking includes:

• System Security Check
• App Security Check

Go to "Settings" > "Privacy" > "Payment Protection". Select the apps to be protected.

Harassment and Fraud Prevention

realme UI protects users from phishing calls and messages by automatically blocking messages from the pseudo base and intercepting-suspicious calls.

Block Calls

Go to "Settings" > "Privacy" > "Block & Filter" > "Block Calls" or Go to 📞

Tap : in the upper right corner > "Block & Filter".

You can set call blocking rules by yourself:

• Block All Incoming Calls: You won't receive calls anymore unless there are calls from VIP contacts or white-listed numbers.
• Block Numbers that Begin with Specific Digits.
• Block Unknown Incoming Calls: Please be aware that when you turn this function on, you might miss some important phone calls.
• Block Unknown Numbers by Location-based Attribution: You can block numbers from specific locations.
• Block One-ring Incoming Calls and No-number Calls: This is for unknown numbers only.

Block Messages

Go to "Settings" > "Privacy" > "Block & Filter" > "Block Messages".

You can set the message blocking rules on your own.

Keywords for Spams

Messages from unknown numbers containing particular keywords that you have set will be recognized as spams.

Block Messages from All Unknown Numbers

All messages from unknown numbers that are not in your contact list will be blocked.

Blacklist

You will not receive any phone calls or messages from blacklisted numbers.

Add Blacklists

Go to "Settings"> "Privacy" > "Block & Filter" > "Blacklist".

You can enter numbers manually or select numbers from contacts.

Whitelist

Calls and messages from whitelisted numbers will not be blocked.

Add Whitelist

Go to "Settings"> "Privacy" > "Block & Filter"> "Whitelist".

You can enter number manually or select number from contacts.

Kid Space

In "Kid Space", you can:

• Customize usage duration that the kid is allowed to use the phone for each time
• Set apps that the kid is allowed to access
• Turn off Cellular Network

Enter Kid Space

Go to "Setting" > "Privacy" > "Kid Space".

After completing the customization in "Settings", tap "Enter Kid Space".

With Kid Space mode, users are only allowed to use the apps in the list of

"Apps allowed to be accessed". Every time when the preset time is up, the

mobile will be locked automatically. A passcode is then needed to unlock the phone.

Quit Kid Space

In Kid Space mode, tap "Quit Kid Space" on the bottom of the screen, and verify your identity to quit Kid Space.

Private Safe

Private Safe conceals photos, audio, documents, and other files. You can choose the files that you want to hide. Passcode, fingerprint or face are needed to access to files in Private Safe. You are unable to take screenshots after entering Private Safe.

Add Files

You can add files in the following ways.

Private Safe

Go to "Settings" > "Privacy" > "Private Safe". Verify the password, and select the files to be encrypted.

Encrypted File

Open "File Manager", press and hold the files to be encrypted, and tap "Set as Private" from "More" in the toolbar below.

Encrypted Photos

Open "Photos", press and hold the photos to be encrypted, and tap "Set as Private" from "More" in the toolbar below.

Access to Private Files

• Go to "Settings" > "Privacy" > "Private Safe" or access "Private Safe" via desktop shortcut.
• The encrypted files can be viewed after you verify with lock screen password, fingerprint or facial recognition.

Private System

Private System provides a private space to realme UI 2.0 users. You can create a copied system where your apps and data are independent from the original one, and make it accessible only via a separate fingerprint or password, you can even hide the access to your private space in the main system.

Apps can be duplicated from the original system to the Private System and notifications can be displayed in both systems.

Go to Settings - Privacy - system cloner

19 30 Wed, Aug 26 19 30 Wed, Aug 26

One-tap App Lock

There's now a shortcut to turn App lock on or off. Swipe down on the Home screen to open the Quick Settings panel to find the shortcut tile.

When App lock is turned on, you can enter a password or use fingerprint/facial verification to lock selected apps.

19:30 Cancel Set Privacy Password Set Privacy Password • • • • • • • Other Encryption Methods 1 2 3 4 5 6 7 8 9 0

15:21 Private Safe Photos Audio Documents Others

Add Private Safe to Desktop

• Go to "Settings" > "Privacy" > "Private Safe" and verify the password.
• Click the icon on the upper right corner to turn on "Home Screen

Shortcut". You can access to "Private Safe" after creating a home screen shortcut.

Tools & Applications

Application Basis

Download and Install Apps

You can download and install different kinds of apps based on your needs and preferences to extend features of realme UI and enhance user experience.

• Tap "App Market" on the Home screen.
• Search and select the app that you want to download, and tap "Install".

- After the app has been installed, tap "Open" in the app store or tap the app from the Home screen to open the app.

App Details

Select the app that you want to download and go to the introduction page to view more details, reviews, and recommendations of the app.

Switch between Different Apps

You can quickly switch to different apps and multitask with the help of applications run in the backstage.

• Swipe from the bottom of the screen to activate the multitasking interface.
• Browse all the apps in the interface and swipe left or right to switch the app.
• Tap "X" to close all the apps in operation.

Settings Search Settings Sign in Airplane Mode SFM Card & Cellular Data WiFi Bluetooth Other Wireless Connections Applications & Status Bar Display & Brightness Home Screen & Lock Screen Magazine Clear

Move and Organize Apps

How to deal with apps that appear on the Home screen? You can organize and arrange them as needed.

Move Apps

Apps on the Home screen can be moved as you wish.

• Long press the app.
• Drag and drop the app to the desired page and location. Swipe either left or right to jump to another page.
• Move with the dock. The number of dots above the dock shows the number of home screens.

- Move multiple apps at the same time: Long press the blank area of the home screen to enter the editing mode. A selection box will appear at the top right of the app. Check the apps and move simultaneously.

Create Folders

Organize your apps by piling them into folders to make the Home screen seem tidier. It can be also easier to find apps.

Tools Contacts Recorder Compass Calculator Clone Phone One-Tap Lock Screen Keep Notes

- Create a folder by moving one app icon atop another.

- Move the apps that you want to classify into the folders. One folder can include more than one page.

- To name a folder, tap the name bar to rename, then tap elsewhere outside the name bar to save the folder name.

- Delete the folder to move all apps out of the folder.

Delete Apps

You can remove unwanted apps at any time.

• Press and hold the app until a white box shows up, and then tap "Uninstall".
• A confirmation box will appear for you to ensure that you are going to uninstall the app. Tap "Uninstall" again to uninstall the app with all related data cleaned up.

Clock

Alarm Clock

If you need the phone to ring or vibrate at a particular time, you can set an alarm clock in the "Clock" app.

Create an Alarm Clock

• Open "Clock" and tap "Alarm" at the top of the interface.
• Tap at the upper right corner to add an alarm.
• Set a time for the alarm and its label.

• Tap "Repeat" to set on what days in a week the alarm will ring.

• Tap "More", you can set different ringtones for the alarm.

• If you turn on "Snooze", the alarm will ring for the second time 5 minutes after you press the Power Button or turn off the clock, or the alarm rings continuously without being turned off.
• Tap "Save" after you complete the setting.

19:50 Edit Alarm Clock Stopwatch Timer 08:30 Alarm Never, Ring in 9 hours 57 minutes

Edit or Delete an Alarm

• To edit the alarm, tap the corresponding alarm in the alarm list.
• The switch button at the right side of an alarm can be used to enable/disable an alarm.

- To delete an alarm, tap "Edit" at the upper left corner or long-press the corresponding alarm, select the alarm and confirm the deletion.

Set Vibration of a Specific Alarm

The vibration of a specific alarm will not be influenced by the vibration mode of your phone.

Turn on Alarm Vibration

Go to "Alarm" > Tap 「+」to add a new alarm > "More" > "Ringtone"> "Vibration".

Weather-Adaptive Alarm

The weather-adaptive alarm is new in realme UI 2.0. Your alarm sound can now be adapted to the current weather. Start your day off right by learning about the weather conditions with a backdrop of melodious music.

How to enable: Tap an alarm, choose More, tap Ringtone, and enable Weather Adaptive.

19:30 Ringtone Vibration Sync with Ringtone > CUSTOM Select from Files > SMART RINGTONE Weather Adaptive Automatically adapt your alarm sound to the current weather. SYSTEM RINGTONES None Calm Nostalgic Romance Dreams Visions

World Clock

Use the "Clock" to view the local time in different time zones.

Time Display Setting

● The 24-hour and 12-hour system

1. Open the "Clock" app.

2. Tap the icon on the upper right corner to enter the setting page, and tap "Date and Time".

3. The phone clock will be displayed by default in the 24-four format. If the 24-hour format is turned off, it will be then displayed in the 12-hour format.

● Automatically Set Date & Time

1. Open "Clock".
2. Tap the icon on the upper right corner to enter settings, and tap "Date and Time".
3. Turn on "Use network-provided time", and the phone will automatically calibrate the time when it is connected to the network.

● Time and Time Zone

1. Open "Clock".
2. Tap the icon on the upper right corner to enter settings, and tap "Date and Time".
3. After turning off "Use network-provided time", you can change the time zone and time by yourself.

Add Time Zone Clock

1. Open "Clock".

2. Tap + on the upper right corner to search different cities, countries or municipalities.

3. Tap to add the local time of that location to the Clock.

4. To delete the local time, tap "Edit" at the upper left corner or long-press the corresponding clock and tap "Delete".

5. To add the world clock to your desktop: Long press the home screen, tap "Add Widgets" and drag the world clock to the home screen.

19:30 23:05 Tue, Dec 3 Clear 14°C 23:05 Delhi Today 18:35 Paris Today -4.5 h 01:35 Beijing Tomorrow +2.5 h G Calendar Photons Clock Settings App Market Theme Store Play Store Google

Set Dual Clock

● How to open Dual Clock

Open "Clock" and tap the icon on the upper right corner to enter settings.

1. Tap "Date and Time", then tap to turn on "Dual Clock".
2. After turning on the "Dual Clock", the lock screen or clock widget will display the time in two different time zones when you are away from the place of residence.

- Place of Residence

1. Tap "Date and Time", then tap "Dual Clock".
2. Tap "Usual Residence" to select the city of residence after authorizing the weather function to access to a network.

- Where to find Dual Clock?

1. Tap "Date and Time", then tap "Dual Clock".
2. Tap "Display Dual Clock on" to choose whether to enable the lock screen and the clock widget to display Dual Clock.

Stopwatch

Use Stopwatch

1. Open "Stopwatch". Tap "Start" to start counting seconds. Even if you open other apps at the same time, the stopwatch will continue working.

2. To record laps or split time, tap "Lap".

3. Tap "Stop" after recording, and tap "Reset" to clear records.

19:30 Alarm Clock Stopwatch Timer 00:02.05 Pause Lap

Timer

Use Timer in the Clock app to set a countdown for multiple events, making it easier to better manage the time.

Set Timer

1. After setting the countdown time, tap "Start".

2. You can pause the countdown by tapping "Pause", and exit the countdown by tapping "Cancel".

Preset Common Items

- System default

There are three preset timing items in the system, including Brush Teeth, Face Mask, and Steam Eggs. Select the timing item and tap to start the countdown.

- Personalized preset

You can also set up a personalized countdown item as needed. To add a timer, tap [+] below it.

For example, set a timer labeled "Study" with a "20 minutes" countdown, and tap "Save".

You can delete unwanted timers by tapping "Edit" at the top left corner and tapping the personalized timer.

19:50 Edit Alarm Clock Stopwatch Timer 23 14 59 00 hours 15 mins 00 secs 01 16 01 Brush Teeth Face Mask Steam Eggs 00:02:00 00:15:00 00:10:00 + Start

Weather

Get real-time weather information for different cities.

Authorization to Acquire Location Information

The screen shows you local weather information when the Location Info is acquired.

View Current Weather and Weather Forecast

View current weather and weather forecast for your current location or the other cities.

• View Current Weather: Open "Weather", the screen will show the local weather.
• View Hourly Weather: Pull down the screen, swipe left or right to view the hourly weather during the day.
• View Weather Details: Pull down to the bottom to view air quality, visibility, UV, humidity, and more.
  ● Weather Forecast: Tap "15-Day Forecast" and go to the "China Weather" page to see more weather information.

19:30 New Delhi 12°C Cloudy 25°C / 10°C Tue 25:00 0:00 1:00 2:00 3:00 4:00 Cloudy Clear Cloudy Cloudy Cloudy Clos 12°C 12°C 11°C 11°C 11°C 11 7-Day Weather Report Dec 3 Today Sunny 25/10°C Dec 4 Wed Haze 22/9°C

View Weather in Multi-Cities

View weather in multiple cities to better manage your trip.

• Go to the "Weather" app, click on the building icon at the top right corner, and choose "City Management".
• Click + at the top right corner, enter the name of a city, and enter the page of city weather.
• Swipe left to right to switch cities and view weather information for different cities.
• Delete a city: Go to "City Management" > "Edit", select a city, and then tap "Delete".

Calculator

In "Calculator", you can add, subtract, multiply, and divide. You can also do maths in exponential functions, logarithmic functions, trigonometric functions, etc., as well as online exchange rate, length, area, volume, speed, weight, temperature, power, pressure, and other unit conversions.

Numeric Calculation

Basic Calculation

• In "Calculator", you can perform basic calculations such as addition, subtraction, multiplication, and division.
• Tap (C) to clear the numbers in the current display.
• Slide the keypad down to see history records of calculation.

19:30 Calculator Exchange Rate Converter C % × ÷ 7 8 9 × 4 5 6 - 1 2 3 + 00 0 . =

Scientific Calculation

Tap to enter the scientific calculator mode.

Online Exchange Rate Conversion

In "Exchange Rate", you can easily convert between different currencies. The online exchange rate conversion apply the latest data from Webull.

Press and hold the calculation result to copy it to the clipboard.

More Unit Conversion

Tap "More" to make unit conversions such as length, area, volume, speed, weight, temperature, power, and pressure.

19:50 Calculator Exchange Rate Converter Length Area Volume Speed Weight Temperature Power Pressure

Compass

Use "Compass" to navigate, display direction, and check latitude and longitude.

Calibrate Compass

Calibrate "Compass" before you use it for the first time. Swing your phone while you stay away from the interference sources to calibrate the compass.

View the Direction of Where Your Phone is Pointing at

Use "Compass" to help you navigate the direction.

• Place the phone horizontally to have access to longitude and direction.
• View direction: The lower area around the compass will indicate the direction where the phone is pointing at.
• View latitude and longitude: The bottom of the screen will indicate the latitude and longitude of your current location.

19:30 Compass Calibration Move away from any sources of interference and perform as shown in the illustration to calibrate the compass. 19:30 Compass Level 166° South NL EL

Phone Calls

Make a Call

Making a call by selecting a number in your contacts, or tapping one of your favorites or recent calls.

Dial Manually

• Enter the number in the keypad, then tap
• Tap the input field above the keypad, tap "Paste" to paste a number to the keyboard, then tap to make a call.

Make a Call to Your Contacts

Add someone in your Contacts, make a call by searching the name from Contacts.

1. Open "Call" > Go to "Contacts".
2. Tap "Name Card" in the Contact.
3. Select the number that you want to dial in the Name Card and tap

Call Back

The phone keeps the recent calls, tap the number to call back directly.

1. Open "Call" > "Phone" to view recent calls, tap the number to call back.
2. Tap ⓘ after a number to view the detailed information about the call.

Manage Incoming Calls

You can answer, mute, reject the incoming calls, or simply respond with text messages.

Mute Calls

If you do not want to be disturbed by incoming calls, you can mute all phone calls.

• Tap "Mute" when a phone call rings.
• Press the "Lower Volume" on the left side of the phone to mute the phone calls.
• In the mute mode, you can still answer the call while you have not rejected the call.

Respond with SMS

You can reply with SMS if you reject a call.

• Go to "Call" > "settings" > "Reject with SMS".
• You can quickly respond to the incoming calls with a default text message. You could also customize the texts on your own.
• When your phone rings, tap "Message", and select a default response or click "Customize" to write a text message by yourself.

Call Forwarding

When you are unable to answer the call, you can transfer to another number.

• Go to "Call" > "settings" > "Carrier Call Settings" > "Call Forwarding".
• Select a call forwarding condition such as "When busy", "When unanswered" and "When unreachable", and enter the number to activate the call forwarding.
• Call forwarding service will be varied as it is based on by the carrier.

Call Waiting

You cannot answer the other calls if you don't hang up on the ongoing call.

Turn on "Call Waiting" to get a notification when there is an incoming call.

- Go to "Call" > "settings" > "Carrier Call Settings" > "Additional Settings" > "Call Waiting".

Multi-Operations During a Call

Adjust the Audio

You can make some adjustments regarding audio during answering a call.

• Adjust the volume: Press the volume button on the left side of the phone.
• Mute: Click the
• Hold: Click
• Speaker: Click

Initiate a Conference Call

Depending on the carrier, you can initiate a conference call with multiple contacts.

• During a call, tap + to add calls. Then go back to the current call, dial another number, and click "Merge Calls".
• During a conference call, you can choose to talk to a specific number or hang up a number.

Use Other Apps During a Call

You can also use other apps when you're answering a call.

● During an ongoing call, go to the Home screen and open other apps.
- Click the icon at the top of the screen to return to the call.

Call Recording

When you use realme UI 2.0, you can record a call if you need to keep the audio recordings.

Call Recording

If you need to record a call, tap ☐ before or during a call.

After initiating the call, click 📄 and the button will be switched to

"Recording Standby" in green color.

Auto Recording

You can also set auto-recording rather than record calls manually.

• Go to "Call" > "settings", and tap "Call Recording".
• If you need to record audio from specific numbers, tap "Record Specified Numbers".
• Select numbers from "Calls", "Groups" or "Contacts" to add to the Auto-record list.
• Tap > "Edit" in the upper right corner to delete the numbers that you do not want to record automatically.
• Turn on "Record All Unknown Numbers", your phone will automatically record all unknown phone calls.
• Turn on "Record All Calls" to record every phone call.

Check Call Recordings

After recording the call, you can play, share, or delete the recording or set the recording as ringtone.

• Go to "File Manager" and tap "Audio" to find all saved call recordings.
• Click "Select" in the upper right corner to select recordings to be cut, copied, deleted, or set as private, etc.

Recordings Storage Limit

There is no storage limit for call recordings in realme UI 2.0. Otherwise, you can also set a limit for recording storage on your own for better usage of the phone.

• Go to "Call" > > "settings".
• Go to "Call Recording", click "Maximum Recording" and select the items to save the call recordings.

Identification of Unknown Numbers

Go to "Call" > "settings" > "Identification of Unknown Numbers" >

"Online Identification of Unknown Numbers".

When "Identification of Unknown Numbers" is enabled, you can accurately identify unknown numbers from incoming calls, call history and messages and then mark them as fraud or harassment, etc. When disabled, unknown numbers can only be identified using the local phone number database.

Messages

Send and Receive SMS

Start Conversation

You can talk to one or more than one contact in "Messages".

• Go to "Messages", click at the top right corner.
• Enter recipient number directly, or click ⚫ at the right side of the input field to select contacts from "Calls" "Groups" and "Contacts". You can add multiple contacts at one time.
• Enter SMS Messages at the bottom of the screen, and then click ↑ to send the messages.

Search Messages

Messages will be automatically saved to the message list, which it will be more convenient for you to search for messages at any time.

• In the message list, you can tap the name of a contact to view conversation history.
• If there are too many messages on the list, you can type keywords in the search bar to find corresponding content.

Message to Call

You can make a call to the recipient from a text conversation by tapping the number at the upper left corner.

Send Pictures, Videos, and Audios

You can send pictures, videos, and audio messages via SMS and MMS.

Send Pictures

1. Tap + in the bottom left side of the screen, and click 📋 to select pictures from "Photos".

2. Click to take photos.

3. You can view or delete pictures in the input field after selecting pictures to be sent.

4. Click to send pictures.

Send Videos

1. Tap in the bottom left side of the screen and click .
2. Click "Select Videos" to select the videos stored on your phone.
3. Click "Take Video" to shoot the video clips.
4. You can play or delete videos in the input field after selecting the videos.
5. Click to send videos.

Send Audios

1. Tap + in the bottom left side and click ☑

15:21 Cancel New Message To: realme India + Message Picture Take Photo Contact Card Audio Video MMS

1. Tap "Record Audio".
2. Click the red button at the bottom of the screen to start recording. Tap √ after recording.
3. You can play or delete videos in the input field after you select the audios.
4. Click to send audios.

View Pictures, Videos, and Audio Messages

• Video messages can be viewed directly from the message list. Images and audio messages will be displayed as the website links.
• Tap a message and open the link to view the picture or listen to the audio message.
• Click "Save" to download the image or audio.

Send a Namecard

You can share a contact name card to a recipient in "Messages".

• Tap + in the bottom left side and tap 📋.
• Select "Text" (name and number), select a contact from "Calls", "Groups" or "Contacts", then click "Add". Click ↑ to send the text name card.
• Select "vCard" (full version of the name card), select a contact, and then tap "Add". Click to send vCard.
• Click vCard will be displayed as a website link. You can view and download the vCard in the browser.

Delete and Block Messages

Delete Messages

You can delete messages either one by one or delete them in batches.

1. Press and hold a message to copy, share, delete, or add to Favorites, etc.
2. Long press a message to repost, delete or add to Favorites in batches.

Delete Conversation

You can delete the conversation with contacts.

• In the message list, find the conversation that you want to delete.
• Press and hold the texts, and tap "Delete Conversation".

Browser

Browse the Web

View a Website

When you use the browser, the following operations can help you navigate the website link.

• Open a Web page: Search or enter an URL, or view the Bookmarks/History.
• Refresh the Web: Click the refresh icon next to the search box.

- Swipe Screen to Navigate: Go to "Settings" > "Swipe Screen to Navigate" to swipe left to go back to the previous page or swipe right to move forward to the next page.

If you want to view the PC version of the web, you can change the Browser identification (UA).

• Go to "Settings" > "Browser Identification (UA)".
• Web pages are unable not be automatically adapted to the mobile display after switching to the PC version of UA

Share the Web Page

Tap "Share" to share the current web page with your friends.

• Tap "Share" at the bottom of the browser.
• Copy the URL to the clipboard or share the link directly to Messages, Gmail, Facebook, etc.

Pictureless Mode

Viewing pictures via a cellular network may consume data. Enable the "Pictureless Mode" to save data.

- Tap "Pictureless Mode" at the bottom of the browser.

- In Pictureless Mode, images will be displayed when Wi-Fi is on, while they will not be shown under cellular networks.

Browse Tabs

You can use browse tabs while viewing multiple websites.

Add New Tabs

Tap "Multi-Window" and tap +to add a new tab.

View Tabs

• Tap "Multi-Window" to view all tabs that are in display, which are shown in the shape of cards.
• To view a single tab, tap the card.
• Tap the Back button to view the current website.

Close Tabs

• Tap the tab icon at the bottom to view all open tabs.
• To close the tabs, tap ✗ in the upper right corner, or swipe either left or right on the tab.
• To close all open tabs, tap "Close All" on the left of the browser.

Search

In the browser, enter a URL or keywords to search websites or information.

Quickly Access Copied Content

- Go to "Setting" > "Quickly Access to/ Search of Copied Content".

- Search keywords or copy an URL, the browser will show the latest content in the clipboard. Tap "Search" and go.

Find in the Page

• Long press anywhere in the blank area, then tap on the option that pops up as "Find in the Page".
• Tap "Find in the Page" and search the keywords. The related content will be highlighted in blue color.

Search Engine

- Go to "Settings" > "Search Engine" to select the search engine that you want to use with.

- Browser provides four search engines: Goggle, DuckDuckGo, Yahoo, and Bing.

AD Blocking

If you don't want to see ads while browsing webpages, you can enable "AD Blocking".

• Go to "Settings" > "AD blocking", enable "AD Blocking" and "Blocking Reminder".
• While viewing a webpage, long-press the blank and click "Block AD" to add the webpage to "Blocking Management".
• Go to "Blocking Management", and tap "Edit" at the upper right corner to delete blocked sites.

Private Browsing

You can customize browser settings to protect privacy.

Clear Data

Go to "Settings" > "Clear Data".

You can choose to clean input data, history, cached webpages, cookies or other data.

Traceless Browsing

- Go to "Settings" > "Traceless Browsing". Your browsing will not generate any viewing data.

File Manager

There may be many files on the device. "File Manager" helps you find files efficiently and conveniently.

Quick File Sorting

File Manager will automatically detect and sort files. Files will be displayed as "Audio", "Video", "Photos", "Document", "APK", "Downloads", "Cloud Drive" and "Recommended Apps".

Quick File Sorting can be accessed in the quick-sort entry on the Home page, where files are managed through a simple-and-easy interface. For example, all images are displayed in "Photos".

Tap "Recents" to see recently used files.

Folder Manager

Tap "Phone Storage" to manage files through a hierarchical view in the folder.

realme UI will automatically identify if a file is created by the app and its file type. The folder attribution will be marked at the right of the file name.

For example, the "Recordings" folder will be marked as "Recordings" where there are all audio files recorded by the "Recording" app.

19:30 Recents Categories Phone Storage 32.8 GB of 256 GB Used Clean-Up Photos 151 Video 75 Audio 0 Document s 0 APK 1 Download s 0 Cloud Drive Recommended Apps APPS WhatsApp Storage Locations Phone Storage 223 GB of 256 GB Available

Set as Private

You can set a file as private, private files will not be displayed in File Manager.

You must go to "Private Safe" to view it.

Long press to select the file. Click "More" > "Set as private".

To access the private safely, press and hold "Recents" or "Categories", or you

can add a shortcut to Private Safe to your desktop to access it later.

You need to set a privacy password before using Private Safe for the first time.

Go to "Settings" > "Fingerprint, Face & Password" > "Privacy Password".

Phone Manager

"Phone Manager" is a security and optimization center. It provides useful tools

such as Virus Scan, Clean Storage, Privacy Permissions, etc.

Examine and Optimize

After entering the "Phone Manager", the system will automatically detect and score the overall operation status.

Tap "Optimize" at the bottom of the score to optimize the system.

19:30 100 Scanning Clean Up Storage Privacy Permissions Virus Scan Payment Protection Component Check

Clear Up Storage

"Clean Up Storage" is an efficient and instant method to clean up the storage of your phone.

You can also access through "Settings" > "Additional Settings" > "Storage" > "Clean".

19:50 Clean Up 43.7 MB View Details > Clean Phone Storage 32.8 GB Used 256 GB Total APPS & APP DATA App Data 417 MB > WhatsApp Cleaner > CATEGORIZED FILES Photo Cleaner 49.4 MB > Video Cleaner 6.06 GB > Audio

The system will automatically analyze the file type, and categorize the apps cache, advertising cache, redundant installation packages, and uninstall the residues for system optimization.

Privacy Permissions

Tap "Privacy Permissions" to view and manage permission for each app. For example, some apps need to have access to "Use Camera".

Proper control of the app permissions is able to optimize power consumption and also avoid privacy disclosure and financial loss.

Virus Scan

Tap "Virus Scan" to initiate automatic virus scanning and detect the alleged malicious apps and files. If found, tap the icon below to clean the malicious apps and files.

Go to "Phone Manager" > "Settings" > "Virus Scan Engine". You can choose different antivirus software to scan the virus.

19:30 Virus Scan 51 % Scanning /storage/emulated/0/ColorOS/ Camera/ Cache/IMG20191123181127.6 Malicious Apps 0 items scanned Malicious Files 3680 items scanned Stop Scanning Supported by Acapi

Payment Protection

Payment Environment Check

Tap "Payment Protection" to initiate an automatic system security check. For instance, the payment environment check will identify whether the system has been updated with the latest security patches, whether the current network connection is reliable, whether there are malicious applications, etc. Make sure to pay or manage your personal property only when there's a secure payment environment.

19:30 Payment Protection System Security Ensure latest security patches installed 1 APPS GUARDED BY PAYMENT PROTECTION Paytm Download More Apps

Apps Guarded by Payment Protection

"Payment Protection" will secure mobile payments, internet banking, stocks, and other apps to prevent third-party apps from detecting the safety status of your phone, which may ensure your payment process to be private and guard your personal property.

Component Check

"Component Checkt" is equivalent to the safety examination center of a mobile phone, as a way to detect the potential security risks as well as the breakdown in both software and hardware.

Run Test

• Tap "Start Check" to start the test.
  ● During the detection, you can choose to skip some items.
• After the test, a test report will be generated indicating if the phone's current hardware and software are functioning well.

Full Check Checking Light Sensor... Item 4/11 Stop> Please plan your palm close to the upper half of the screen and wave your hand as shown in the picture. Follow the on-screen instructions and make corresponding judgements. OK, Start Now Light intensity Check whether the above value changes when performing this action. Unchanged Changed

Test Records

Click "Records" to view the previous test report.

Theme Store

In the "Theme Store", you can download and change themes, wallpapers, ringtones, as a way to customize your phone.

Purchase / Download Resources

You can search the theme name, style, color and designer in the search box atthe top. Otherwise, you can view the available items in the Store.

19:50 FLOVERS Rank Chosen Top Of The Week Potential Theme 03 56 CyanGanesbaltX 25 OSKR My OSKR My OSKS Best Of The Week Popular Theme 18:00 03 Themes Font Wallpapers Me

Set the Theme

Enter "Theme Store" > "Me" > "My Resources" to view the themes that you currently have.

Themes are divided into "System Themes" and "Downloaded Themes".

A full set of "Themes" may include diverse elements from the lock screen, interface, home screen wallpaper, to icons and others. If you want to merely change some of the elements, enter a theme and choose "Apply the Theme to".

19:30 Default 2:3 AM OPPO 19 30 19 30 Introduction Default Apply

Set Wallpaper

Enter "Theme Store" > "Me" > "My Resources" > "Wallpapers" to view wallpapers that you currently have.Wallpapers are divided into "System Wallpapers" and "Downloaded Wallpapers".

Tap "Apply" to set the wallpaper as "Lock Screen Wallpaper" "Home Screen Wallpaper" or both of them.

You can also set images in "Photos" as the wallpaper.

Go to "Photos" or "File Manager", select a picture and click "More" to set it as wallpaper.

23 15 Tue, Dec 3 Set as Lock Screen Wallpaper Set as Home Screen Wallpaper Set as Both Cancel

App Market

"App Market" is an official platform to install and manage various apps. You can download apps that you need in App Market.

Apps in App Market are free of charge. However, some of the app developers may set a restriction for some specific functions in the app and charge it. It should be noted that it is the developer who charges the fee.

You will see some recommended apps on the home page, namely "Home". Enter the keywords in the search box at the top to search for some related apps.

Banner

You will see the latest updates recommended by App Market shown up in the banner.

Games

Selections

View, reserve, and install recommended games.

Categories

You can search games in different categories based on your preferences, such as action, adventure, arcade and more.

Apps

Selections

View, reserve, and install recommended apps.

Categories

You can search apps in different categories based on your preferences, such as Beauty, Business, Comics and more.

Top

App Market also provides you with the top downloaded apps to give firsthand updates, including "Updated" "Trending" "New" "Hot Search".

My Information

Tap "General" at the bottom to view personal information, help, feedback, and more.

Manage Personal Info: You can edit your name, alias, date of birth and more.

Manage Apps: You manage installed apps and view app updates.

Recorder

You can use the built-in microphone to record various audios, including daily conversations, lectures, interview or calls.

Standard Recording

Tap the Red Dot at the bottom of the main interface of Recorder.

If switch to other apps while recording, the recording will continue in the backstage. To return to "Recorder", tap the red bar at the top of the screen or slide down to open the notification center and tap the ongoing recording task.

19:30 Standard 00:05.70 00:06 00:02 00:04 00:06 00:08 00:10 00:02 Mark 1 00:05 Mark 2 00:04 Mark 3 A II ✓

Meeting/Interview Recording

You can also choose to record in either "Meeting Recording" or "Interview Recording" mode. These modes are optimized for special usage scenarios to create better recording results.

• Meeting Recording: It is suitable for conferences where there are multiple participants. The enhanced vocal recording effects can be used to record clearer voices of people.
• Interview Recording: It is suitable for dialogue scenarios. Place the top of the phone toward the interviewer and the bottom to the interviewee, to use the microphones at both ends to record the conversation.

Audio Manager

- The recorded audios will be stored in "File Manager" > "Audio", the default name of the recording is referred to as "REC+ Recording End Time".

- Long-press an audio file to share, rename, cut, and more.

Mark Recording

• Tap the name of a recording to enter the detailed playback interface with waveform and progress.
• Tap "Flag" on the left side of Play/Pause to mark the important time points.
• The default name of the marked recording is set as "Mark + Number". To rename the mark, tap the icon on the right.

Screen Recording

realme UI has a built-in screen recording tool that allows you to record videos, game graphics, and operation steps, which can be shared on social media with your friends.

Start Screen Recording

From Control Center

• Slide down from the top notification bar to open the Control Center.
• Click in the upper right corner.
• Tap □1 and the recording will start automatically within three seconds.
• You can tap and drag □1 up to the notification bar for easier access to screen recording.

Start Screen Recording in the Entry of Smart Sidebar

1. Go to "Settings" > "Convenience tools" > "Smart Sidebar".
2. Swipe smart sidebar and click "Screen Recording" to start recording the screen.

Screen recording will be automatically stopped and saved when the video file reaches the maximum size of 5GB. Meanwhile, the screen recording process will be also terminated if you lock the screen, make a call or shut the phone down. The recordings will be saved to "Photos" in MP4 format.

Screen Recording Settings

Go to "Settings" > " Convenience tools " > "Screen Recording".

● Video Resolution: You can switch video resolutions between 480P and
720P. If to set the video resolution as 480P, the file can be smaller, though the quality can be lower.
- Record Screen Taps: Taps on the screen will be recorded to show the
detailed operations, as a way to better illustrate how you operate on the phone.

- Front Camera: Your face will be recorded and shown up on the screen in the form of a small circle, which fits well for those who live-broadcast the game playing.

One-Handed Mode

You are able to zoom in the screen to fit one-thumb operation when you enable the one-handed mode. The one-handed mode allows you to text with a single hand, especially when you have to carry something heavy or take the public vehicles.

- Slide down the screen to open "Notification Center", tap ☑ to unfold all icons.

- Tap to activate One-Handed Mode.

After the One-Hand Mode is turned on, tap the buttons on both sides to switch between the screen near the lower left or near the lower right corner.

Tap the button at the top of the screen to exit One-Handed Mode.

Focus Mode

Immerse yourself in your work or studies with Focus Mode. In Focus Mode, your phone plays soothing ambient noise and blocks calls and notifications to help you stay focused on the tasks at hand.

Entering Focus Mode

Go to the Control Center, and choose Modes > Focus Mode.

Setting the Focus Period

You can set the focus period ranging from 5 minutes to 180 minutes at the center of the screen. During the focus period, all applications are hidden and disabled, and all messages and notifications are blocked.

Selecting the Focus Atmosphere

You can select one of four soothing environments, Ambient Sounds, Wheat

Field, Waves and Summer Night, listed beneath the focus period.

20:34 Focus Mode Anything in life worth achieving requires practice. 50 min Summer Night Start

Customizing Focus Schemes

You may tap the icon on the top of the screen to customize a focus scheme and encourage yourself to stay focused.

Viewing Focus Statistics

Tap the icon in the upper right corner to view Focus Statistics, including the length of time and number of times spent focusing today, and the length of time and number of times spent focusing in total.

20:40 Statistics Today 0 min | 0 sessions Total 0 min | 0 sessions More Records

Incoming Call Alerts

In focus mode, if you don't want to miss important calls, you can tap the [] icon in the upper right corner, choose Settings, and enable Incoming Call Alerts, so that you can answer incoming calls normally.

Screen-Off Timer

You don't need to press the power button each time you want to check the focus timer during study or work. Tap the [] icon in the upper right corner, choose Settings, and enable the Screen-Off Timer. Then, the current focus

timer is displayed when the screen is off (but is not displayed when the battery level is low).

Clone Phone

Clone Phone allows transferring all data stored on your old phone (including Settings, Photos, Contacts, Apps) to your new phone within several simple taps.

Import from an Android Phone

The old phone needs to install a "Clone Phone". Be aware that both devices are sufficiently charged. If the old phone does not install the Clone Phone app, tap https://i.clonephone.coloros.com/download to install.

19:30 Select Current Phone Type Clone Phone can quickly transfer data (such as photos, contacts, and apps) on your old phone to your new phone. Ensure that both devices are sufficiently charged. New Phone Old Phone Scan the QR Code on the New Phone Open "Clone Phone" on the new phone. Tap "New Phone" to generate a QR code. if the QR code cannot be recognized, manually connect to the personal hotspot below the QR code. Connect

• After selecting "This Is the New Phone" or "This Is the Old Phone" as prompt, use the "Clone Phone" app on the old phone and scan the QR code on the new phone.
• Once paired, the devices will automatically transfer the selected data via personal hotspot.

Import from an iPhone

To import data from an iPhone, firstly, you'll need to sync the data to iCloud. Tap "Import from an iPhone" in the "Clone Phone" app, log in to the iCloud account of the iPhone to import data.

19:50 iPhone Sign In to iCloud Apple ID Password Sign In Note: Only data synced to iCloud can be imported. Do as follows to sync your data to iCloud: 1. Go to "Settings - iCloud" on your iPhone. 2. Turn on synchronization for contacts and other desired data. 3. Turn on iCloud Photos.

ORoaming

ORoaming provides data packages from local carriers while you are traveling worldwide. Purchasing a data package allows you to access the Internet without a SIM card.

Complete the following steps to gain access to ORoaming before you travel abroad.

• Open the data supermarket, select the package that you want to purchase and click "Buy" to finish the purchase.
• Go to "ORoaming" > "Settings" > "Automatically Turn On/Off Data Package". If it is yet to enable, you need to turn on the ORoaming package manually after you arrive abroad.

A data package cannot be activated and connected to the network until you arrive. No network is required to activate ORoaming. Once activated, it is unable to refund. It usually takes 1 to 3 minutes to activate a data package, depending on the local carrier.

19:30 ORoaming Data Package Orders EUROPE United Kingdom From US$4.70 Germany From US$4.39 France From US$4.20 Italy From US$4.20 AMERICAS United States From US$4.70 Canada From US$5.63 OCEANIA Australia From US$1.90 New Zealand From US$2.38 AFRICA

Make your Shots

Outstanding

Learn How to Capture the Best Shots

Open "Camera" and start to create delicate and professional shots. realme UI 2.0 also allows you to make the shots more stunning, as you can apply capture timer, HDR, Portrait mode, Night-scene mode, and Time-lapse photography.

Take Photos

Adjust Brightness

Open Camera. Tap anywhere in the frame to sharp focusing. You can customize the focusing area to change with where you tap on the screen. After you complete focusing, press and hold the screen, then slide up or down to adjust brightness.

Zoom in or out

You can tap the button 1x to focus on the object. The object will be zoomed in if you toggle the button, and it will be reverse if you toggle again. You can also pinch the screen to zoom in or out.

Turn the Flash on/off

Tap the flashlight button 40 turn the flash on or off. You can set the button for different uses including "Off", "On", "Auto" and "Fill Light". When you set it as "Auto", your phone will be automatically detect lighting conditions and determine if flash is necessary. When you set it as "Fill Light", the flashlight will be kept on to add lighting for the shooting. It is advised that you set to flash as "On" when at night or under a dim-lit environment.

Portrait mode

The PORTRAIT mode enables you to easily shoot more natural and awesome portraits. The portrait bokeh function is available for both the rear and front cameras, and the degree of blurring can be easily adjusted. The system provides five built-in portrait styles.

How to enable: Open Camera and choose the PORTRAIT mode at the bottom of the screen.

AI Beautification

The upgraded beauty is more intimate, not only can match different skin colors in different scenes and lighting conditions, and easy to open a one-button makeup. It also intelligently adjusts the beauty intensity based on skin color and aesthetic differences. Your beauty, I am going to sublimate.

You can make 8 categories of AI-enabled beautification for your face appearance in the photos. Tap 📄t the bottom right corner to enter Beauty mode where you could airbrush your face, enlarge your eyes, make your face slimmer and more chiseled, add touch-ups. Drag the slider at the button of the camera to adjust the level of Beauty mode.

Night Mode

Under the Ultra Night mode, the camera will take 4 to 5 continuous shots at different exposures with AI-enhanced algorithmic operations, in a bid to combine shots for clearer and brighter photos.

The built-in AI Ultra Clear Engine is able to identify 21 categories of scene elements with other 800 scene combinations. While taking photos with Ultra Night mode, the camera will recognize the most suitable shooting solution and reconstruct color casts based on the overall color optimization, as a way to enhance color expressiveness under different lighting conditions.

realme devices In the handheld mode, a night photo is synthesized by synthesizing 3-8 photos with different brightness and darkness. In the stand mode, up to 17 photos with different brightness and darkness can be supported for synthesis, and the image quality will be greatly improved.

The self-developed dim image enhancement algorithm ensures a clear and textured picture even in extreme environments where the light is

very weak . Photographs are never restricted, and you can make bigmovies anytime, anywhere.

Notes: Avoid shaking the phone and keep stable while taking photos in Ultra Night mode.

Open "Camera", tap 📋 in the bottom left corner and choose "NIGHT" (Ultra Night mode is now only available on some realme phones).

Normal Ultra Dark Mode

Dazzle Color Mode

When you turn on Dazzle Color mode, the camera will set color enhancement to be vivid and bright, making colors of your photos more striking. Dazzle

Color mode is nothing like simply adjusting saturation or adding filters, rather, it will polish every pixel to optimize colors after identifying under which photo

mode the photo is taken. Tap the button is the upper area of the screen to turn on.

Expert Mode

Expert mode allows you to take more professional photos under more precise settings.

Open "Camera", tap "MORE" at the bottom left corner and then choose "EXPERT".

The options that can be set manually include sensitivity (ISO), shutter speed

(S), white balance (WB), focus (AF / MF), exposure compensation (EV), etc.

Click on each option and slide the lower slider to the left or right. Adjust

specific values. Click the button to switch the parameter value between automatic and manual.

Sensitivity adjustment: The lower the ISO, the smoother the photo will be.

The higher the ISO, the louder the random background noise will become and the more distracting the quality will be.

Adjusting the shutter speed: The shutter speed determines how long the sensor is exposed to light. If you take a photo of a moving object, for example, a running child, then you need to increase the shutter speed.

White balance: White balance is closely relevant to color temperature. Under different lighting conditions, different color casts could be created. For example, it can be of the slight blue cast under the light source of fluorescent lamps and of the yellow cast under the light source of incandescent lamps. To present the realistic color cast, adjusting white balance could also lead to the change of color temperature to either cooler or warmer tones.

Focusing: Adjust focusing to make photos sharper. Choose to either focus on an object with a blurred background or focus on background with blurred objects.

Exposure compensation: Once exposure compensation is on, the camera will automatically come up with a suitable parameter for exposure compensation, making the photos brighter or dimmer.

Take Photos with Filters

You can add filters while taking shots and adjust different visual effects. Tap

at the upper area of the screen to select your desired filters. Swipe left or right to change filters, as you could view it in real-time. You can take shots immediately after you decide which filter to use as a way to edit your shots.

Take a Panorama Photo

When it is unable to capture scenery from a wide-angle, take advantage of the panorama mode while taking photos.

Use rear camera for panorama photos

• Open "Camera", choose "PANO".
• Tap the Shutter button, pan slowly in the direction of the arrow, keeping the arrow on the centerline. To finish the pan, tap the button again.
• To pan in the other direction instead, first tap the arrow.
• When you take photos of the high-rise buildings, rotate the phone to landscape orientation by panning slowly in the direction of the arrow.

Use front-facing camera for panorama photos

You can also use the front-facing camera to take panorama photos by panning the phone either to right or left.

Tips for panorama photos

• You can take panorama photos from the furthest locations as long as the panorama allows. You may also stop the shooting by tapping the Shutter button.
• Remember to pan the phone slowly to make sure that the camera captures as many details as it can and focuses better. This could also make the photos less blurring.
• Avoid moving the camera up and down during shooting, otherwise, the photos may be formed unevenly.

HDR

HDR is referred to as High Dynamic Range Imaging. When HDR is on, your photos will be reproducing a greater dynamic range of luminosity, making the photos acquire more display contrast and be closer to what the human eyes see. Tap HDR, you can set it as "On", "Off", or "Auto".

Watermark

You can add a watermark to your photos. You could also add the author of photos. It should be noted that every photo will be added with the author's watermark once you upload the name of the author.

Open "Camera", tap at the top right corner, then add watermark or the author name for the photo.

Gesture to Take Photo

The gesture control allows you to take long-distance selfies or group photos simply with a hand gesture. No extra touch on the phone is required. You can pose a particular hand gesture, and the shooting is done.

Go to the camera settings and tap "Gesture to Take Photo" to enable automatic shooting based on hand gestures. When you use this function for the first time, follow the on-screen instruction to finish the gesture control. You can only raise a hand when facing the camera for 3 seconds, after that the camera will start automatic shooting.

Shoot Video

Tap the Record button to start shooting video. Tap again to stop recording.

Tap "PHOTO" to switch back to photo-taking mode.

By default, video records at 30 fps (frames per second). Depending on your model, you can choose other frame rates and video resolution settings.

The faster the frame rate and the higher the resolution, the larger the resulting video file.

Video quality can be switched from either 4K / 1080p / 720p.

Note: Only several models could set video quality on your own.

Open "Camera", drag the slider down at the bottom of the phone to switch to video recording.

Take photos while shooting a video: You can also tap the Shutter button in the lower-left corner of the screen to save as photos while you are recording a video, and it won't interrupt the shooting.

Video Bokeh

After the rear, the blur adjustment of the front lens is handed to you. Blurring is more powerful, self-timer and he is free to shoot. The problem of false and

false defects has also improved, and the post-deployment has further

improved the effect of flare and asymptotic feeling.

What's even more amazing is that not only taking pictures, but also making

videos can be blurred. At the same time as the real-time background is

imaginary, the subject is more prominent.

SLO-MO Video

SLO-MO records a scene or object with a normal action or move and turns it

into a video that plays back in very low speed. You can customize the

resolution ratio of the SLO-MO video into 720P or 1080P. The higher the

resolution ratio, the more space the video file will occupy.

Open "Camera", tap "MORE" and select "SLO-MO".

TIME-LAPSE Video

TIME-LAPSE video records a scene or object that has a slow state-of-change and turns it into a video that plays back at a high speed. Under TIME-LAPSE mode, the videos will be compressed to the short duration based on a ten-to-one ratio regardless of how long the video duration is.

If you want to capture a sunset, traffic flowing or other experiences over a period of time, be sure to place your phone at a stable and safe place.

Open "Camera", tap "MORE", select "TIME-LAPSE".

Notes: Not all realme phones support TIME-LAPSE video.

Editing a Video

After finishing shooting a video, you can operate the various editing directly within your phone.

Tap "Edit" at the bottom of the video and enter Editing mode.

Trim a Video

Drag either end of the frame viewer to cut unnecessary parts or shorten the video duration.

Speed Changing

Choose what speed you would like the video to play. There are five different speeds including 0.25X, 0.5X, 1X, 1.5X, and 2X. You can play the video in slow motion with the speed of 0.25X while in TIME-LAPSE motion if you apply the speed of 2X.

Add theme and filter

After finish trimming and speed changing for the video, tap "Next" to add more themes and filters.

Add soundtrack

To make a video more dynamic, you can also add soundtrack both from local and system music.

Add special effect

realme UI offers two kinds of special effects to better highlight the video, including Close-up and Pulsation.

• Close-up: The video frame will be zoomed in for more detailed shots.
  ● Pulsation: The beat of regular repetitive movements.

Add texts

You can add marks or subtitles at different frames in the video.

Add watermark

Add a watermark with the location and date of the video to show up in the bottom left corner of the video. After editing, tap "Done" to save the video.

Camera Settings

Open "Camera", tap ⑨ at the top right corner to customize camera settings.

• Format settings: You can set the photo ratio to 4: 3, 1: 1, full screen, and switch each time you click.
• Countdown photo: After the countdown photo is turned on, pressing the shutter button will not take a photo immediately. You can set the time to 3 seconds or 10 seconds after each click to switch.
• Touch to Take a Photo: Touch anywhere on the screen to start taking photos.
• Volume Button: Set the Volume buttons to function as a shutter release or zoom controls.
• Grid: Display gridlines to ensure the camera is leveled.
• Shutter Sound: Make or mute camera shutter sound when capturing photos.
• Location: Tag your photos with geo-locations.
• Flip Selfie: Your selfies may look mirrored to what's actually taken. Turn on Flip Selfie to flip a mirror selfie image.

Photos

Photos

All photos and videos will be displayed with the taken date.

View photos

Pinch the screen with two fingers to look through the photos in the Year or Month timeline. Tap the thumbnails to view photos in full screen.

You can also pinch the screen by zooming in or out to view more details of the photos. Swipe left or right to browse photos.

Tap the photos for more options:

• Share: Send the photo to other users.
• Favorite: Tap to set the photo as favorite and restore in the favorite album.
• Edit: Tap to edit the photo.
• Delete: Tap to delete the photo.
• Others: You can also set a photo as wallpaper, assign as the avatar to a contact, make it private or public, or view more information.

Share photo

If you want to send a photo to your friends, tap 📋 at the bottom left corner.

If you want to send more than one photo or video, select them in the thumbnail view, and tap at the bottom left corner.

After selecting, you can also do the followings apart from sending them to your friends:

• Set them as private
• Add them to an album
• Collage
• Delete

"Albums" will display all the photos and videos in categories, including camera shooting, screenshots, smart albums, etc.

View Albums

realme UI 2.0 intelligently divides photos into multiple Albums, making it easy for you to manage and find photos.

All photos: All photos stored on your phone

Camera: All photos and videos taken by the phone

Screenshots: All screenshots and screenshots of your phone

Favorites: all photos and videos you clicked

Video: All video files saved in the phone

Recently deleted: All photos and videos deleted in the last 30 days, you can choose to restore to album or delete permanently.

In addition, realme UI 2.0 also offers a smart album, which categories photos and videos regarding people and locations. You can view photos and videos of certain people or locations.

Create a new album

You can create new albums apart from the albums created by realme UI. For example, create a new album that stores your photography named "Personal album".

Go to "Photos" > "Albums", tap at the top right corner, type a name for the new album, then tap "Save".

Once saved, you'll be given categories of photos that you can transfer to your album. Just choose the image or tap "Select All" then tap "Save".

"Memory" will intelligently analyze your photos according to the shooting location, shooting time and shooting theme, and show various wonderful moments in the form of videos.

Tap thumbnails to enter Memories, and click Play. realme UI will automatically play a movie-like video edited with music and visual effects.

Go to "Photos" > "Explore"

Create a Memory album

You could create your own Memory album.

Enter "Photos" > "Explore", tap the top right corner, tap "New Memory" to create a Memory album, then type a name for the Memory album and select no less than 20 photos.

Customize Memory album

You can also edit or polish the Memory video. Tap "Play", click the "Edit" at the top right corner and start editing.

theme: Choose your favorite from the 10 themes, with each of them matching with different background music and display.

Music: Add the music either from the built-in storage or upload a local file.

Title image: Select one of your favorite title image from Memory video.

Title: Edit the title of the Memory video.

Photos: Choose photos to set time for display. You can also delete them if you think they don't perfectly fit the theme of the Memory album by tapping "Delete" at the bottom right corner. Tap "X" to delete the photos in batches.

Duration: Customize the duration of the video. The maximized duration is 48s.

Optimize Storage

Enable "Optimize Storage" to auto-sync photos and videos in order to make room for other files.

Open "Camera", tap the top right corner, tap settings, tap "Auto Sync", sign your HeyTap account or Google account, and tap "Optimize Storage".

After you enable "Optimize Storage", photos with the original size will be synced in realme Cloud, and the photos saved on your phone will be stored as a smaller size, allowing your phone to have more storage. After you disable "Optimize Storage", realme UI will automatically download the photos with the original size for you.

Search Photos

realme UI 2.0 allows you to search for photos with the smart searching function.

Enter "Photos", and tap the search bar atop to start search photos.

You may view photos classified as Latest, by data, event/location, and person.

You can also search with keywords such as time, place, or people to quickly locate results. For instance, search "Scenery" and view the photos you took during travel.

Using Soloop to Create Vlogs

Thanks to technological advances in software and hardware, people everywhere now have the opportunity to take short videos of moments in their daily lives.

realme UI includes a whole new short video editor called Soloop. Soloop lets you edit videos and add filters, music and effects to your videos in seconds. Amazing videos are just one tap away.

Smart Editing, Creating a Video in One Tap

Besides automatically creating wonderful stories, you may also experience the powerful editing functions of Soloop. The mobile phone becomes an omnipotent editor, realizing your dream of becoming a director.

21:55 SO LWP Welcome to Soloop My Memories Add more videos or photos to the album to generate memories. Create Video

Importing Materials

Start Soloop, tap Create Video, and select and import the required videos and pictures.

You can quickly view and select files by type, for example, All, Photos, and Videos. You can also swipe to the Category module. On this screen, Soloop automatically recognizes over 80 picture scenarios and 24 video scenarios, and intelligently categorizes raw materials, comprehensively covering various scenarios in daily life.

Selecting Video Size

Soloop automatically selects a suitable display ratio based on the video materials. You may manually set the display ratio to 1:1, 4:3, 3:4, 16:9, or 9:16. After the required size is selected, the video and pictures are automatically cropped.

Selecting a Smart Template

Don't painfully learn to edit, just a little, it will automatically select the wonderful picture, and follow the music rhythm card to make the wonderful blockbuster instantly, even if you need to start, when it scans enough excellent clips, Will generate a wonderful story on its own initiative. All you have to do is export and share, and wait for praise.

21:33 3:4 Generate FIELD SPORT 00:05 / 00:12 Reselect Material none Show You Champion Travel Diary Old Story Holiday Smart Templates Trim Filter Subtitle Music

Editing Materials

• Tap Edit to process the materials more specifically.
  ● To add a material, tap the + sign on the left.
• To delete a material, side to the corresponding clip, and tap the delete icon.

• To cut a material, side to the corresponding clip, and tap the scissors icon to cut this segment into two.

• To change the sequence, press and hold any segment to go to the sorting screen. Press and hold the corresponding material to arrange it.

• To change the speed, tap the related clip, and choose to speed up or slow down the playing speed at the bottom of the screen.
• To change the duration, tap the related clip, press and hold the left end or the right end of the clip, and slide inwardly to the desired position.
• To add the reverse play effect, tap the related clip, tap the 📋 icon to set this segment to be played in reverse.
• To rotate materials, tap the related clip, and tap the 📄 icon, to rotate this segment 90 degrees clockwise.
• To add rotating animation, tap the ▶ icon between two materials, and add rotating animation here, to make the video more smooth and vivid and give it an animated effect like a movie.

21:34 3.4 Generate I AM THE CHAMPION I AM THE CHAMPION I AM THE CHAMPION I AM THE CHAMPION 00:00 / 00:12 Smart Templates Tom Filter Subtitle Music

Selecting a Filter

Add a filer so that the video and pictures have a better texture. Tap Filter and select one for the video. Over 10 filters are available. After selecting a suitable filter, tap the filter again to adjust the intensity.

21:55 3:4 Generate 00:07 / 00:12 Smart Templates Trim Filter Subtitle Music

Adding Subtitles

Do you want to add subtitles like those in movies and TV series? This is easy in Soloop.

Tap Subtitle, and side along the time axis to the point where the subtitle needs to be added. Click Add Subtitle to go to the editing screen, enter no more than 100 characters, and select the font color.

Then, the subtitle will be displayed over the picture. You can tap on the subtitle to enlarge, rotate, move, re-edit or delete it.

After the subtitle has been added, a subtitle layer is displayed in the video editing area. You can press and hold the subtitle layer and change the time

position the subtitle appears at, and press and hold the left or right end andslide inwardly to increase or decrease the duration the subtitle appears for.

Good night 90 characters left

Adding Music

Tap Music and add suitable background music to the video. Soloop recommends music styles to you based on the video content, so you don't need to worry about the choice of music. The music library is updated regularly and follows trends to satisfy your ears at any time. You can also tap Local Music to add music locally stored on the mobile phone.

21:35 3:4 Generate 00:07 / 00:12 Mute Smart Templates Trim Filter Subtle Music

Generating the Video

After you've finished editing, tap Generate in the upper right. Wait a moment for your video to be finalized. The video will be automatically saved

to Photos on your mobile phone. You can also share the video quickly by choosing realme Share, Facebook, or Tik Tok.

21:35 About 2 seconds left. 00:00 / 00:12 Exporting the video to your local album...

Adjusting the Export Resolution

Go to Soloop's home screen, tap the Settings icon in the upper right corner, tap Export Resolution, and select 1080p or 720p.

Adding a Watermark

Go to Soloop's home screen, tap the Settings icon in the upper right corner, and enable Video Watermark. Then a Soloop-specific watermark will be added to pictures in the video.

21:36 Settings Export Resolution 1080P > Video Watermark Clear Cache 0 B Version No. 1.2.3 Check for Updates User Agreement > Privacy Policy >

Viewing My Projects

Go to Soloop's home screen, and tap the icon in the lower right corner to view all your projects. You can tap on a project to enter the editing screen and continue editing it.

Game Experience

Hyper Boost

Hyper Boost is a full scene, system-level resource scheduling optimization solution developed by realme. Hyper Boost accelerates performance when needed, which could realize the two-way conversation in real-time between applications and system resources, making your phone operate more smoothly.

Game Space

realme mobile phone provides a dedicated application for game lovers, namely Game Space. It will be automatically installed on the phone with the game together in one place, which is convenient for you to unify the management of game applications. It also offers the performance mode, distraction-free mode, game acceleration, and other features to ensure the best quality game experience for you.

The Game Space will automatically launch game mode when you enter the game, where the phone will intelligently adjust the

CPU/GPU/Storage/Network frequency according to the game scenario, ensuring the game to run smoothly at any time and reducing power consumption.

Hide Games Icons on Home Screen

It is inconvenient to search if the game icons are everywhere on the Home Screen. "Hide Games Icons on Home Screen" makes your Home screen organized and tidy.

Go to "Settings" > "Game Space"> Enable "Hide Games Icons on Home Screen", then the game icons for the games will no longer be shown on the home screen.

Note: Games Icons will not return to the original display, instead, they will appear on the last page of the home screen.

Game Mode Settings

Game Space introduces three types of performance modes and a selection of distraction-free mode. You can click on the icons on either left or right to open the menu.

In the middle area, there is an indicator showing the remaining battery usage and the current network latency. Swipe up the menu from the bottom to load more new features.

- Pattern Adjustment

Competitive Mode will improve the game app performance, frame rate and touch response, further enhancing your gaming experience. However, the pitfall is there will be increased power consumption. Thus, the pattern adjustment is recommended for some large competitive games.

Balanced Mode will balance the performance and power consumption, which is suitable for most light-weight games.

The low-power mode will lower the game quality, but it will prolong the battery usage, which is recommended for the phone in low battery.

Smart Dual-Channel Network Optimization

Swipe up from the bottom of the screen to display the menu, and enable Smart Dual-Channel Network. This function can further reduce WLAN delay by using the 4G network. However, this will consume mobile data.

Locking Brightness During Gaming

Gaming can be affected if the screen suddenly dims. Swipe up from the bottom of the screen to display the menu, and enable Brightness Lock to lock the screen brightness during gaming. This means that the screen brightness is no longer automatically adjusted according to the light sensor, and, therefore, the screen won't flicker when the light sensor gets blocked during gaming.

Game Assistant

While playing games, you can use the side-to-slide hand posture with the help of a Game Assistant. It will be displayed in a small window where the user can directly enable screen capture, recording, hang-up, and other related functions.

Flip the Switch

Go to "Settings", tap "Game Space", and turn on the button titled "Game Assistant".

Blocking Calls and Notifications

If you do not want to be disturbed during gaming, you can enable Block Notifications.

Tap the icon in the lower right corner to choose whether to reject incoming calls and whether to block incoming calls and notifications.

Answer Calls in Banner Notice

When you play the game in the landscape, incoming calls will appear as banner notice, you can answer or reject the calls, and the game will not be paused or stopped.

Decline Incoming Calls

If you do not want to be interrupted by any incoming calls during the game, you can turn on "Reject Calls".

Screen Capture

In the menu of Game Assistant, you can capture screenshots or record the screen.

Floating Window Chat

When you have to reply to some important messages, with the help of Floating Window Chat, you don't have to exit the game anymore. The Game Assistant can help you reply to the messages without quitting the game.

After clicking on APP that needs to be displayed in a floating window, the APP will appear as a small window on the side of the screen, allowing you to quickly reply to Wechat, QQ or SMS messages while you are playing games. All applications that support floating window chat will be displayed in the Game Assistant.

Capturing Game Moments

You can find all your gaming highlights here. Press and hold the game icon, and tap Screen Captures to view all the screen captures and screen recording videos.

Gamer Mode

realme UI 2.0 introduces Gamer mode for the game lovers, which blocks calls, social media notifications, and limit gestures or operations that could disrupt your game so you can stay focused on annihilating your opponents*.

*Blocked apps and gestures/operations include:

1. Incoming calls and messages (WhatsApp/Line/Telegram/Messenger)

2. Pushes from status bar and notification drawer

3. Navigation gestures buttons, back gestures, and Game Assistant
4. Power button screen lock, auto screen-off
5. Volume buttons
6. Floating windows

Go to Activate during gaming - Game Assistant - Immersive mode

Restart, Update, Back Up,

Restore & HeyTap Cloud

Restart

Power on/off

To shut down your phone:

- Press and hold the Power button until the slider appears.

• Drag the slider down.
• To power on your phone, press and hold the Power button until the realme logo appears.

Restart the Phone

Press and hold the Power button until the slider appears, drag the slider up.

Or press and hold the Power button and Volume up button for more than 10s to restart the phone.

Software Updates

The upgrading process won't consume your cellular data. Back up your data and ensure your phone is fully charged before upgrading.

You can update realme UI in the following ways.

OTA Online Update

realme UI 2.0 will automatically download the available updates while it's connected to a network, and you will receive a system notification before installing the new version.

Otherwise, you can manually update your phone in "Settings" > "Software Updates".

Local Update

• Download the update firmware package for the corresponding model from the realme official website
• Store the firmware package with the suffix OZIP in the root directory of the phone file storage.
• Open "File Manager", tap the firmware, and select "Update Now".
• Restart your phone after updating.

Back up

You can back up your data to the phone storage or realme Cloud.

Back Up to Phone Storage

- Go to "Settings" > "Additional Settings" > "Back Up & Restore".

- Open "Back Up & Restore", tap "Create New Backup", and select the data that you want to back up with.

19:30 New Backup Select Data to Be Backed up Contacts 3/3 Mes: 31.17 KB Messages 9/9 Mes: 6.59 KB Call History 2/2 Mes: 900 KB System Data 6/6 Items: 2.15 MB Apps (Excluding Data) 23/23 Files Start

All data will be stored in the phone storage. Please copy all back-up files to an external storage device, computer or others before you start cleaning the cache or resetting the data.

Back Up to HeyTap Cloud

• Go to "Settings" > "HeyTap Cloud".
• Activate "Cloud Backup".
• To backup manually, tap "Back Up Now".

Restore

You can restore your data and settings from backup, or restore your phone to factory settings. Be careful to back up your data before restoring the phone.

Restore Phone

Go to "Settings" > "Additional Settings" > "Restore Phone".

You have the following options when restoring your phone:

• Reset System Settings Only: It won't consume the stored data including photos and music.
  ● Clear Downloaded Apps and App Data: Keep data (e.g. photos, songs).
• Clear All Data: Clear all data including photos and music.
• Clear the Contacts and Call History on This Phone: Contacts on the SIM card will be retained.
• Clear the SMS and MMS Messages on This Phone: SIM messages on the SIM card will be retained.

Restore Data

Restore from Phone Storage

• Go to "Settings" > "Additional Settings" > "Back Up & Restore".
• Select the data to be restored, and tap "Start Restoring".

Restore from HeyTap Cloud

• Go to "Settings" > "HeyTap Cloud" > "Cloud Backup".
• Select the data to be restored, and tap "Start".

App Optimization

App Cleaner

Clean up the junk cache files on your phone.

Open "Phone Manager" > "Cache Junk". You can choose the following options:

• One-click Clean Up
• Clean All App Data
• Clean Photos
• Cleans Videos
• Clean Audios
• Clean Files
• Clean Idle Apps

Smart System Management

This is a new feature of realme UI. The Smart System Management would intelligently stop the apps which have been barely used for a while, as a way to prolong battery usage.

Smart Memory Compression

This is another new feature of realme UI. It works to detect inactive apps and compress its memory to make space for other apps.

HeyTap Cloud

HeyTap Cloud Backup serves to back up your contacts, SMS, photos, files.

Activate HeyTap Cloud

• Go to "Settings" > "HeyTap Cloud".
• Enter the lock-screen passcode and toggle on "Enable Cloud Service". The system will start the backup of photos, contacts, notes, calendar, browsing the history, and WLAN by default.

HeyTap Cloud Sign In Keep your data safe by closing it in... Upgrade Cloud Storage Quick Start Guide for Cloud Service View Now Cloud Drive Cloud Backup Off About Cloud Data Sync Photos Recordings Contacts Browser Wi-Fi

Optimize Storage

When enabled the optimized storage, the original photos will be stored at HeyTap Cloud, while smaller, clearly visible versions of photos will be stored on your phone to save space.

Go to "Settings" > "HeyTap Cloud" > "Photos" > "Optimize Storage".

When disabled, the original photos will be automatically downloaded to your phone.

Manage Cloud Storage

HeyTap Cloud provides 5G free storage for each user. If you need more cloud storage, you can delete unused data or pay for the upgrade of more storage.

Check Your Cloud Storage

Go to "Settings" > "HeyTap Cloud" > "Manage".

Free Up Cloud Storage

You cannot back up data to the Cloud after the storage is full. You may delete the unwanted data for more space. Backing up your device is recommended.

Purchase More Cloud Storage

Each user will acquire a 5GB free cloud storage. You can purchase more space when you need.

Go to "Settings" > "HeyTap Cloud" > "Upgrade Cloud Storage".

You can upgrade the storage plan to either 50GB, 120GB or 1024GB. You can pay for renewal every month, three months, half a year, or on a yearly basis.

Contacts Time Machine

Whenever there are changes in contacts, a record will be automatically generated, allowing you to restore to the previous status.

Go to "Settings" > "HeyTap Cloud" > "More" > "Time Machine".

realme Lab

in realme Lab, you can try out beta versions of OS functions.

Functions in realme Lab are updated from time to time. Some functions will released in official OS versions after they are proved to be stable, while others may be canceled.

New functions released in realme Lab are in the beta testing phase. There may be some bugs in this phase and we will try our best to fix them. You can go to our realme community report your suggestions or feedback.

Dual Earphones

Dual Earphones Dual Earphones Use both Bluetooth and wired earphones at the same time. MEDIA AUDIO realme Buds Air Wired Earphones Phone Speaker Supported Scenarios 1. The Bluetooth and wired earphones can receive the same media audio. 2. The wired earphones receive media audio and the Bluetooth earphones receive phone audio. Like this function? We are working to develop cool features you may find useful. Please let us know if you like the feature. Like Dislike

● the Bluetooth and wired earphones can receive the same media audio.
- The wired earphones receive media audio and the Bluetooth earphones receive phone audio

DC dimming

This feature can reduce screen flickering on low brightness

Super standby

- Super nighttime standby

When your phone is idle at night, the network connection and phone sensors will use less power. However there may be delays in receiving messages.

● Background cleanup when screen is off

When your screen is off, some background apps will be closed to reduce battery consumption. There may be delays in receiving messages.

Sleep Capsule

Restrict your phone use for better rest and sleep.

When the sleep capsule is turned on, the phone will be locked for a predetermined period of time, and only apps in the allowlist can be used during downtime.

Support & Service

Contact realme Support

Contact realme Support Team to get more help.

Email: [e-mail]

Get Help and Explore

View the most frequently asked questions about all popular topics of realme.

https://www.realme.com/in/support/faq

HeyTap Cloud

Get more support and service from realme Cloud, please log in

http://Cloud.heytap.com/.