Equip HCD554IP - Security Camera HONEYWELL - Free user manual and instructions
Find the device manual for free Equip HCD554IP HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (IP) |
| Brand | Honeywell |
| Model | Equip HCD554IP |
| Dimensions (W x H x D) | 7.5 x 7.5 x 15.0 cm |
| Weight | 0.5 kg |
| Power Supply | Power over Ethernet (PoE) or 12V DC |
| Resolution | 1080p Full HD |
| Night Vision | Up to 30 meters IR |
| Field of View | 90° wide angle |
| Weatherproof Rating | IP66 |
| Motion Detection | Yes, with adjustable sensitivity |
| Audio Support | Two-way audio via built-in microphone and speaker |
| Storage | MicroSD card (up to 128 GB) or NVR |
| Connectivity | Ethernet (RJ45), Wi-Fi optional |
| Mounting | Wall or ceiling bracket included |
| Operating Temperature | -20°C to 50°C |
| Maintenance | Clean lens with soft dry cloth; check cable connections periodically |
| Safety | Install in accordance with local electrical codes; avoid exposure to extreme conditions |
| Spare Parts | Replacement lens, mounting kit, power adapter, Ethernet cable |
| Reparability | User-serviceable parts: lens, cables; internal repair by qualified technician |
| General Information | Indoor/outdoor use, compatible with Honeywell HUS and third-party VMS |
Frequently Asked Questions - Equip HCD554IP HONEYWELL
How do I install the Honeywell Equip HCD554IP camera?
Mount the camera using the included bracket, connect via Ethernet cable to a PoE switch or injector, and power on. Use the camera's IP address in a web browser to access the setup wizard.
How do I reset the camera to factory settings?
Press and hold the reset button (usually near the Ethernet port) for 10 seconds using a paperclip while the camera is powered on. The LED will blink to confirm.
How can I view the camera feed remotely?
After configuring network settings, you can access the camera via its IP address or through Honeywell's mobile app. Ensure port forwarding is set up on your router if accessing from outside the local network.
Does the camera support night vision?
Yes, it features IR LEDs with up to 30 meters range in complete darkness. The day/night mode switches automatically based on ambient light.
Can I record video from the camera?
Yes, it supports local recording via MicroSD card (up to 128 GB) or network recording to an NVR. Continuous, scheduled, or motion-triggered recording modes are available.
How do I update the camera's firmware?
Download the latest firmware from Honeywell's support website. Access the camera's web interface, go to the 'Maintenance' section, and upload the firmware file. Do not power off during update.
What is the field of view?
The camera has a 90° horizontal field of view. Optionally, the lens can be adjusted manually to alter the viewing angle.
Is the camera weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against heavy rain and splashes. Suitable for outdoor use.
Can I connect multiple cameras to one system?
Yes, this camera can be used with Honeywell NVRs or third-party systems supporting ONVIF. Up to 16 cameras can be managed via the HUS platform.
What should I do if the camera loses connection?
Check Ethernet cable connections, ensure PoE power is active, and verify network settings. Reboot the camera by disconnecting power for 10 seconds. If issue persists, reset to factory defaults.
User questions about Equip HCD554IP HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual Equip HCD554IP - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Equip HCD554IP by HONEYWELL.