Hanwha

SDC-9410DU - Security Camera Hanwha - Free user manual and instructions

Find the device manual for free SDC-9410DU Hanwha in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hanwha SDC-9410DU - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Security Camera (Dome)
Resolution 2 Megapixels (1920x1080)
Sensor 1/2.7" CMOS
Lens 2.8mm Fixed
IR Distance 20 meters
Day/Night Function ICR Auto Switching
Power Supply Power over Ethernet (PoE, IEEE 802.3af) or DC 12V
Power Consumption Max 6.5W
Dimensions Ø 120mm x 90mm
Weight Approx. 500g
Ingress Protection IP66
Operating Temperature -10°C to 55°C
Storage Temperature -20°C to 60°C
Humidity Up to 90% non-condensing
Video Compression H.265, H.264, MJPEG
Network Interface 10/100 Mbps Ethernet
Maintenance Clean the dome cover with a soft, dry cloth; avoid solvents.
Safety Use only certified PoE switches or power adapters. Ensure proper grounding.
Spare Parts Contact Hanwha authorized service center for replacement.
General Information Model SDC-9410DU; Installation manual available online.

Frequently Asked Questions - SDC-9410DU Hanwha

What is the recommended way to reset the camera to factory defaults?
Press and hold the reset button located inside the camera housing for 10 seconds using a paperclip. The camera will reboot with default settings.
Does this camera support ONVIF protocol?
Yes, the SDC-9410DU is ONVIF Profile G compliant, allowing integration with most VMS and NVR systems.
What is the maximum PoE cable length supported?
The camera supports PoE up to 100 meters (328 feet) with category 5e or higher twisted pair cable.
Can I mount the camera outdoors?
Yes, it has an IP66 rating, making it suitable for outdoor use in rain and dust.
How do I access the camera remotely over the internet?
Enable port forwarding on your router for HTTP/HTTPS or RTSP, or use Hanwha’s DDNS service for easier access.
What is the default IP address and login credentials?
The default IP is 192.168.1.168. Default username is admin with password 1234. Change these for security.
Does the camera have audio capability?
No, the SDC-9410DU is a video-only camera without built-in microphone or speaker.
What memory card is supported for local storage?
It supports microSD/microSDHC/microSDXC cards up to 128GB for edge recording.
How often should I clean the camera lens?
Clean the lens and dome cover every 3-6 months or when image quality degrades. Use a microfiber cloth with lens cleaner.
Is the camera compatible with third-party NVRs?
Yes, through ONVIF or RTSP streaming. However, some advanced features may require a Hanwha NVR.

User questions about SDC-9410DU Hanwha

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual SDC-9410DU - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDC-9410DU by Hanwha.

USER MANUAL SDC-9410DU Hanwha

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hanwha

Model : SDC-9410DU

Category : Security Camera